Kenwood KDC-122U Car Audio CD USB Strereo, Pair Kicker 3.5" Coaxial Car Speakers, Kenwood KAC-5206 400W 2-Ch Car Amplifier, 8 Gauge Car Amp Install Kit

---

Kenwood's KDC-125U CD receiver exemplifies what you'd expect from a "good bang for the buck" receiver, a solid, no-frills car stereo that gives you several music choices. Kenwood's Music Control app enables you to play and control your connected Android™ phone's playlists. Simple front-panel controls let you run the whole show without diverting your attention.

The KDC-125U also gives you a 3-band EQ and a bass boost, along with a sound reconstruction feature that improves the sound of your compressed music. When you connect a powered sub to the Kenwood's set of preamp outputs, you can turn it up and down with the receiver's sub level control,

• General Features:
• CD receiver with AM/FM tuner.
• Built-in MOSFET amplifier (22 watts RMS/50 peak x 4 channels)
• Plays CDs, CD-Rs, and CD-RW discs loaded with MP3 and WMA music files.
• CD text information display.
• MP3 ID3 Tag Display (Title/Artist/Album)
• AM/FM tuner with 18FM/12AM presets.
• Direct iPod/iPhone connection and control.
• Theft-deterrent, Detachable face with 13-digit LCD display and red button illumination.
  
  
• Audio Features:
• 3-band equalizer with DriveEQ.
• USB port compatible with flash drives containing MP3, WMA, WAV, and FLAC files.
• Kenwood sound reconstruction improves the sound of files encoded at low bit rates.
• Compatible with Kenwood's Music Control app using a connected Android™.
• Drive Change lets you select audio from multiple flash drives or memory cards in a connected
• USB hub, Memory card reader, or Android device.
• Bass boost and loudness controls.
• Low-pass filter and subwoofer level control.
• 1 Set of 2.5V preamp outputs (rear/subwoofer switchable)
  
  
• Expandability:
• Inputs: front-panel auxiliary input, front USB port (no iPod/iPhone controls)
• Outputs: 2-channel preamp outputs (2.5-volt, switchable rear/sub)

This stereo is not marine grade, if your bike will be exposed to water please consider getting a marine unit.
UPC Code 019048213280

---

The Kicker 43DSC3504 3.5" 2-way car audio speakers features a MAX power of 80 watts and an RMS power of 20 watts per pair. A drop-in coaxial upgrade with the flexibility to fit nearly any vehicles doors for a vast improvement over factory sound. Also, the thin-profile woofers avoid obstructing car-window mechanisms and the 13mm polyethylene-naphthalate domed tweeters have zero-to-minimal tweeter protrusion. The high-sensitivity motor structures of the woofers are made to deliver increased volume output despite lower-powered, factory head units, but they also handle the high power from add-on amps. The midrange woofer's stiff, polypropylene cones and acoustic-foam surrounds provide optimal performance for the Kicker 43DSC3504. 1 Buy = 2 Speakers


UPC Code 713034077633

---

Kenwoods KAC-5206 skillfully designed this amplifier to bring you peak sound quality along with upstanding performance. Add the Kenwood Sport Series KAC-5206 amplifier to your system, and you'll catch all the elements you've been missing from your favorite tunes.
The compact KAC-5206 2-channel amp carries 60 watts RMS per channel to your full-range speakers. This amplifier will have your installed speakers kickin’ loud; you'll notice the difference when you pair it with new aftermarket speakers or components.
You can also use this functional amplifier to drive a subwoofer with up to 150 watts RMS in mono mode, with a built-in low-pass filter that enables you to send bass below 80 Hz to your sub and enclosure. You'll also find speaker-level inputs with signal sensing turn-on, so you can put this amp to work in just about any kind of setup. Aluminum cover plates guard the amp's connections and controls, giving your installation a perfect look.

• New Kenwood KAC-5206 400 Watt 2-Channel Class AB Car Audio Amplifier Amp Stereo
• Rated Power:
• 60Watts RMS x 2-ch (4 Ohms)
• 75Watts RMS x 2-ch (2 Ohms)
• 150Watts RMS x 1-ch (Bridged 4 Ohms)
• MAX POWER:400Watts
• Amplifier Type: Class AB
• 2 Ohms Load Capability
• Speaker Level Input
• Signal Sensing Turn-on
• Power MOS-FET Switching Power Supply
• Cast Aluminum Heat Sink Design
• Triangle Indicator
• Signal to Noise Ratio: 95dB (Reference: Rated Power into 4Ohms at 14.4V)
• Frequency Response: 5Hz-50kHz (+0dB, -3dB)
• Input Impedance: 10k ohm
• Speaker Impedance: 4O (2O to 8O allowable)
• Bridged connection 4O to 8O allowable
• Low-Pass Filter: Built in Low-Pass Filter (80Hz, -18dB/oct)
• RCA Input Sensitivity: 0.2[V] - 5.0 [V]
• Speaker Level Input Sensitivity: 4.0[V] - 12.0 [V]
• Battery & Ground: Screw Type Terminal Block (Ni) (M4)
• Speaker Output: Screw Type Terminal Block (Ni) (M4)
• Line In: RCA (Ni)
• Speaker Input: JST Connector
• Operating Voltage: 14.4V(11-16V allowable) [V]
• Current Consumption: 13 [A]
• CEA-2006 Compliant
• Dimensions(WxHxD): 8-7/8 inch x 2-3/16 inch x 7-1/16 inch
• Condition: Brand New!
• Part Number: KAC-5206

UPC Code 019048206183

---

8 Gauge Amplifier Installation Kit

• 20 ft. 8 GA Red Power Cable Competition High Quality Fuse Holder
• 1/4" Ring Terminal 3 ft. 8 GA Black Ground Cable #10 Ring Terminal
• 16 ft. 18 GA Blue Turn-On Wire
• 20 ft. High Performance RCA (TRCA) Interconnect (3) Rubber Grommets
• 30 ft. Speaker Wire 5/16" Ring Terminal
• 6 ft. Split Loom Tubing (20) 4" Wire Ties

UPC Code 791489340014