Kenwood Car CD USB Strereo, Kicker 4-Ohm Speakers, 400W 2-Ch Amplifier, Amp Kit
Kenwood's KDC-125U CD receiver exemplifies what you'd expect from a "good bang for the buck" receiver, a solid, no-frills car stereo that gives you several music choices. Kenwood's Music Control app enables you to play and control your connected Android™ phone's playlists. Simple front-panel controls let you run the whole show without diverting your attention.
The KDC-125U also gives you a 3-band EQ and a bass boost, along with a sound reconstruction feature that improves the sound of your compressed music. When you connect a powered sub to the Kenwood's set of preamp outputs, you can turn it up and down with the receiver's sub level control,
- General Features:
- CD receiver with AM/FM tuner.
- Built-in MOSFET amplifier (22 watts RMS/50 peak x 4 channels)
- Plays CDs, CD-Rs, and CD-RW discs loaded with MP3 and WMA music files.
- CD text information display.
- MP3 ID3 Tag Display (Title/Artist/Album)
- AM/FM tuner with 18FM/12AM presets.
- Direct iPod/iPhone connection and control.
- Theft-deterrent, Detachable face with 13-digit LCD display and red button illumination.
- Audio Features:
- 3-band equalizer with DriveEQ.
- USB port compatible with flash drives containing MP3, WMA, WAV, and FLAC files.
- Kenwood sound reconstruction improves the sound of files encoded at low bit rates.
- Compatible with Kenwood's Music Control app using a connected Android™.
- Drive Change lets you select audio from multiple flash drives or memory cards in a connected
- USB hub, Memory card reader, or Android device.
- Bass boost and loudness controls.
- Low-pass filter and subwoofer level control.
- 1 Set of 2.5V preamp outputs (rear/subwoofer switchable)
- Expandability:
- Inputs: front-panel auxiliary input, front USB port (no iPod/iPhone controls)
- Outputs: 2-channel preamp outputs (2.5-volt, switchable rear/sub)
UPC Code 019048213280
Kicker 41DSC684 D-Series 6x8" 200 Watt 2-Way 4-Ohm Car Audio Coaxial Speakers
Kickers DS-Series speakers once again raise the bar. In addition to providing excellent sound, these Kickers offer a thin profile that allows them to fit in more vehicles.
The high-sensitivity motor structures of the woofers are made to deliver increased volume output despite lower-powered, factory head units, but they also handle the high power from add-on amps.
General Features:
- 2 x Car Audio 6 x 8-inch 2-way Coaxial Speakers
- Model: 41DSC684 D Series
- RMS Power Handling: 100 watts per pair / 50 watts each
- PEAK Power Handling: 400 watts per pair / 200 watts each
- Impedance: 4-ohms
- Frequency response: 45-20,000 Hz
- Sensitivity: 90 dB
- 1/2" Polyethylene-Naphthalate Dome Tweeter
- The Kicker D-Series is perfect for upgrading your factory speakers
- Will work great off of a factory stereo or aftermarket stereo
- Polypropylene midwoofer
- Acoustic-foam surround
- Top mounting depth: 2-5/16"
- Bottom mount Dimensions: 2-11/16"
UPC Code 713034069553
Kenwoods KAC-5206 skillfully designed this amplifier to bring you peak sound quality along with upstanding performance. Add the Kenwood Sport Series KAC-5206 amplifier to your system, and you'll catch all the elements you've been missing from your favorite tunes.
The compact KAC-5206 2-channel amp carries 60 watts RMS per channel to your full-range speakers. This amplifier will have your installed speakers kickin’ loud; you'll notice the difference when you pair it with new aftermarket speakers or components.
You can also use this functional amplifier to drive a subwoofer with up to 150 watts RMS in mono mode, with a built-in low-pass filter that enables you to send bass below 80 Hz to your sub and enclosure. You'll also find speaker-level inputs with signal sensing turn-on, so you can put this amp to work in just about any kind of setup. Aluminum cover plates guard the amp's connections and controls, giving your installation a perfect look.
- New Kenwood KAC-5206 400 Watt 2-Channel Class AB Car Audio Amplifier Amp Stereo
- Rated Power:
- 60Watts RMS x 2-ch (4 Ohms)
- 75Watts RMS x 2-ch (2 Ohms)
- 150Watts RMS x 1-ch (Bridged 4 Ohms)
- MAX POWER:400Watts
- Amplifier Type: Class AB
- 2 Ohms Load Capability
- Speaker Level Input
- Signal Sensing Turn-on
- Power MOS-FET Switching Power Supply
- Cast Aluminum Heat Sink Design
- Triangle Indicator
- Signal to Noise Ratio: 95dB (Reference: Rated Power into 4Ohms at 14.4V)
- Frequency Response: 5Hz-50kHz (+0dB, -3dB)
- Input Impedance: 10k ohm
- Speaker Impedance: 4O (2O to 8O allowable)
- Bridged connection 4O to 8O allowable
- Low-Pass Filter: Built in Low-Pass Filter (80Hz, -18dB/oct)
- RCA Input Sensitivity: 0.2[V] - 5.0 [V]
- Speaker Level Input Sensitivity: 4.0[V] - 12.0 [V]
- Battery & Ground: Screw Type Terminal Block (Ni) (M4)
- Speaker Output: Screw Type Terminal Block (Ni) (M4)
- Line In: RCA (Ni)
- Speaker Input: JST Connector
- Operating Voltage: 14.4V(11-16V allowable) [V]
- Current Consumption: 13 [A]
- CEA-2006 Compliant
- Dimensions(WxHxD): 8-7/8 inch x 2-3/16 inch x 7-1/16 inch
- Condition: Brand New!
- Part Number: KAC-5206
UPC Code 019048206183
8 Gauge Amplifier Installation Kit
- 20 ft. 8 GA Red Power Cable Competition High Quality Fuse Holder
- 1/4" Ring Terminal 3 ft. 8 GA Black Ground Cable #10 Ring Terminal
- 16 ft. 18 GA Blue Turn-On Wire
- 20 ft. High Performance RCA (TRCA) Interconnect (3) Rubber Grommets
- 30 ft. Speaker Wire 5/16" Ring Terminal
- 6 ft. Split Loom Tubing (20) 4" Wire Ties
UPC Code 791489340014
 |