Kicker 10" Marine Car Subwoofer W/ LED Grill, 2000W Amplifier W/ Amp Install Kit
Kicker 11S10L74 Solo-Baric L7 10-Inch (25cm) Square Subwoofer, Dual Voice Coil, 4-Ohm, 600W
The Solo-Baric L7 Series 11S10L74 10" subwoofer features an
injection-molded polypropylene cone that works with a tough Santoprene™
rubber surround to dish out monster bass in a sealed or ported
enclosure. Its unusual shape and black finish make a strong style
statement, and you can add an optional grille to further enhances its
looks. This sub packs dual high-temperature 4-ohm voice coils, giving
you the flexibility to build a multiple sub setup or to draw more power
from your amp with a low-impedance load.
- Power Handling:
- PEAK: 1200 Watt.
- RMS: 600 Watt.
- Impedance: 4 Ohm.
- Dual Voice Coil.
- Heat-sinking cast aluminum basket.
- Square vs. Round: More cone area results in greater sound pressure produced by the woofer
Injection-molded SoloKon™ is Kicker most advanced cone design, adding targeted strength for reliable performance and accurate response.
- Patented corner-ribbed, double-stitched Santoprene® surround provides durability at high excursion with uncompromised sound quality.
- Heat-reducing T-cut top plate.
- Santoprene rubber surround.
- Heavy-duty speaker leads are stitched and glued to the spider rolls for reliable performance when pushed to the limits.
- Progressive-roll spider keeps stress away from the glue joint of the spider landing for long-lasting reliability.
- The massive motor structure of the L7 paired with KICKER's patented square-woofer technology provides extreme output capability.
- Venting in the back-bracing of the cone and perimeter of the spider landing provides maximum air-flow to cool the voice-coil during operation.
- Dual Voice Coils with high-temp copper windings handle extreme power levels for long durations without burning out.
- T-cut top plate extends the magnetic field of the motor, adding balanced motor strength throughout the entire excursion path of the voice coil.
- Solid-dome extended pole piece maintains precise voice-coil control and aids in heat.
- Sensitivity: Sensitivity: 86.8dB.
- Frequency Response: 24-100Hz.
- Mounting Depth: 6-1/4" (15.9 cm).
- Size: 10" (25.4 cm).
UPC Code 713034055068
Kicker L710GLW (11L710GLW) 10" Square Subwoofer LED Grill
This grille, equipped with multi-color LED accent lighting that can be
changed to fit your mood, protects and lights your Square Solo-Baric®
- General Features:
- Size: 10 inch (25cm) Square.
- Accent Leds.
- Multi Colors: Seven different LED colors options available.
- LED color chosen by selecting specified wire to attach the positive and negative power terminals.
- Durable ABS plastic grille to withstand marine, powersport and car applications
- Weatherproof Construction: ASTM-certified for Salt/Fog and UV exposure.
- Brass inserts at screw locations for a solid connection to the subwoofer.
- Grille Color: White.
- Optional LED Light Controller (Kicker 41KMLC)
- Remote can control as many as 20 color changes wirelessly.
- Also controls brightness, adds strobe effect and randomizes colors.
- Compatible with 12" Solo-Baric L7 Subwoofer 2011 Series (11S12L7)
UPC Code 713034075899
3000 Watt 2 Ohm Mono Block Mosfet Amplifier
The Lanzar HTG157 2-Ohm Mono Block MOSFET Car Audio Amplifier will
supply your system with 3000 Watts of MAX Power. It features an
electronic crossover network, bass boost circuit, nickel RCA inputs and
line outs for left and right channel. This HTG157 offers low-pass filter
controls, power and protection LED indicators and soft
1 x 650W RMS @ 4 OHMS 1 x 1250W Peak @ 4OHMS 1 x 1500W RMS @ 2 OHMS 1 x 3000W Max @ 2 OHMS Electronic Crossover Network Bass Boost Circuit 2 Ohm Stereo Stable Nickel RCA Inputs Line Outs for Left and Right Channel Low Pass Filter Controls Power and Protection LED Indicators Soft Turn-on/Turn-off THD: <0.01%. S/N Ratio: >90dB Freq. Response:10Hz~45KHz LPF Freq. Response: 50Hz-250Hz HPF Freq Response:80HZ Fuse: 40A x1 Dimensions:12.99''(L) x 2.24''(H) x 8.81''(W)
UPC Code 068889016154
PYLE PLMRAKT8 Marine Grade 8 Gauge Amplifier Installation Kit
Get all the wires you need to hook up a new marine audio system with this Pyle Hydra amplifier installation kit. These wires have high resistance to moisture, so they’re a great fit on your boat or in outdoor settings. Included wires: 20 ft. 8-gauge red power wire, 4 ft. 8 gauge black ground wire, 20 ft. 18-gauge blue remote turn-on, 20 f. 12 gauge stereo speaker wire, 20 ft. stereo RCA cable, and 6 ft. black split loom cable conduit. Also includes an AGU type 60A gold-plated fuse, water resistant in-line fuse holder, two 8G ring terminals, two 8G spade terminals, five 14-16G spade terminals, 3 butt connectors, 20 cable ties, and one black grommet.
Marine Grade Cables and Wires Perfect for Installations in Boats and Outdoor High Resistance to Moisture 20ft. 8 Gauge Red Power Wire 4ft. 8 Gauge Black ground Wire 20ft. 18 Gauge Blue Remote Turn-On 20ft. 12 Gauge StereoSpeaker Wire 20ft. Right Angle/Standard Stereo RCA Audio Cable 6ft. Black Split Loom Cable Conduit AGU Type 60A Gold Plated Fuse Water Resistant In-line Fuse Holder 2 Ring Terminals: 8G 2 Spade Terminals: 8G 5 Spade Terminals: 14-16G 3 Butt Connectors 20 Cable Ties 1 Black Grommet
UPC Code 068888882415