Harley 98-2013 Bluetooth CD Adapter Kit, Amp Set, Kicker 6.5" 5.25" Speaker Set
Dual built the AM425BT 240 Watt marine CD Receiver rugged so that it can withstand the harsh surroundings you come across at sea. The AM425BT offers plenty of musical sources, useful features and sufficient sound to break up the noise of the wind and waves.
This resourceful CD receiver features direct USB control for iPod and iPhone devices, and built-in Bluetooth Wireless Technology for hands-free calling, audio streaming and player control. You will most definitely make use of Duals motion control sensor which uses simple hand gestures to control the radios most commonly used functions such as play/pause, volume up/down, and track forward/backwards.
The music options are endless. Aside from playing your store-bought and recordable CDs on the Dual unit you can also enjoy your own discs you've filled with MP3 or WMA files. For an even bigger selection you can take advantage of the handy front-panel auxiliary input or USB port to hook up your iPhone or any other portable gadgets so that you can enjoy your preferred tunes while out at sea. You can also take advantage of the practical USB and Auxiliary input on the front suitable for operating USB thumb drives. As well as connect to Pandora Internet Radio for your soundtracks
- General Features:
- CEA-2006 Compliant
-Peak Power Output: 60 Watts x 4 Channels
-RMS Power Output: 18 Watts x 4 Channels - Display Type 3.7" Wide LCD
- Bluetooth Audio for Handsfree calling
- Motion Control
- iPhone and iPod Driect control
- Pandora Control
- Front AUX 3.5mm Audio - USB Input
- Remote Control Included
- Preamp RCA Outputs: 1 Pair
- Preamp Voltage 2 volts
- Built-In Equalizer 5 Selectable EQ curves
- Equalizer 5 Preset Curves - Pop, Jazz, Rock, Beat, Classic
- Wireless Remote Control
Audio Features: - AM/FM Tuner / FM Presets 18 / AM Presets 12
- CD-R/RW - MP3/WMA Playback
- Audio Adjustment Bass / Treble
UPC Code 613815623458
Kicker's 43CSC654 speakers feature a 6-1/2" polypropylene woofer that delivers a full sound with the help of a polyester foam surround that will stay strong for years to come. The 1/2" PEI balanced dome tweeter adds crisp instrumental and vocal detail. You'll get good results powering these speakers with a factory radio or an aftermarket car stereo, but they'll knock your socks off when you drive them with an external amplifier. Grilles are included.
The CS Series delivers remarkable performance and ultra-clean bass, utilizing a heavy-duty motor/magnet structure featuring EVC™ (Extended Voice Coil) technology not found in stock speakers. They use polypropylene cones with tough, ribbed, UV-treated surrounds for precise linear excursion and reliability.
General Features:
- Power Handling: Peak: 600 watts / RMS: 200 watts per pair
- Recommended Power Range: 10 - 100 watts RMS per channel
- Features EVC™ (Extended Voice Coil) technology
- Polypropylene mid-woofer cone material
- Polyester foam speaker surround
- 1/2" Polyether imide (PEI) balanced dome tweeter
- Neodymium magnet motor structure
- Stamped steel frame basket
- Top-mount Depth: 3/8"
- Cutout Dimensions: 4-13/16"
- 4 ohms impedance
- Frequency Response: 40 - 20,000 Hz
- Sensitivity: 90dB
UPC Code 713034076049
New Pair Kicker 10 PS5250 4-Ohm 5-¼" 2-way Marine Harley Davidson Motorcycle Coaxial Speakers System
Kicker PS52504 motorcycle speakers were designed to replace some Harley-Davidson and Victory factory speakers. But when tunes are imperative for a joyride those make a superb replacement for other motorcycle, ATVs and marine applications. The weather-resistant design used to create these speakers only means one thing…they’ll last a long time wherever you place them.
The speakers’ motor structures designed around a light yet powerful, neodymium magnet, so the PS52504 speakers weigh only 12 ounces per speaker, amazingly light for speakers that pack this kind of punch. It creates the perfect pair for mounting on motorcycles, where keeping a low center of gravity hits handling and performance.
Kicker placed the titanium dome tweeter above the woofer, enabling the polypropylene cone to move freely for more bass. Turn up your tunes since these speakers are designed to withstand the heat caused by loud sounds for lengthy periods of time
What’s in the box:
UPC Code 713034055730
Thinking of replacing your Harley Davidson factory stereo? Scosche HDSWC1 will easily help with your modifications. Adding the HDSWC1 handlebar control interface enables you to connect to an aftermarket stereo while containing the full functionality of your factory steering wheel controls. No need to cut or modify any of your OEM radio connections, this will save you hours of work. It’s a simple seven wire connection for easy radio installation with front speakers. Rear speakers will need separate wires from the radio to the rear speakers
The HDSWC1 works with:
FLHX (Street Glide) 2006-Up
FLTR (Road Glide) 1998-Up
FLHT (Electra Glide) 1998-Up
Handlebar control retention interface
Note:
NO XM RECEVER.
THIS THUMB CONTROL WILL NOT WORK WITH 1996 - 1997 DUAL CONNECTORS RETRO
SOUND SYSTEMS, ADDITIONAL HARDWARE/ADAPTER IS NEEDED (SOLD SEPARATLEY)
UPC Code 033991047471
Installation dash kit for 1996-2012 Harley-Davidson DIN. Add an aftermarket stereo to your bike with this perfect fit dash kit.
Thinking of replacing your Harley Davidson factory stereo? The Scosche HD7000AB will create a smooth transition. This kit is designed with high quality automotive grade ABS plastic to match the texture of your factory dash. The Scosche HD7000AB contains the trim for a single din stereo installation for your Harley Davidson. Check out the compatibility chart to see if this trim is right for you.
• Hi Temp factory grade ASA materiel
• stainless steel hardware with brass inserts
• Neoprene sealing gasket
• Made in USA
• Easy to install. No special tools are required. Includes step-by-step instructions
UPC Code 033991047730
Extend your speakers out of the factory speaker opening with the Scosche SAHD675B. Speaker Adapters designed for Select Harley Davidson Motorcycles. The Scosche SAHD675B allows you to install 6-1/2" or 6-3/4." speakers in select 1996-up Harley-Davidson motorcycles
General Features
- Speaker adapter for select Harley Davidson Motorcycles
- Converts from 6-1/2" Harley Davidson speakers to standard 6-3/4" speakers
- Includes one pair of adapters
- Adapter Size: 6.5"
- Adapter Size: 6.75"
- Made of durable ABS plastic
Works with: 2006-2013 FLHX Street Glide, 1996-2013 FLHT Electra Glide & 1998-UP FLTR Road Glide models
UPC Code 033991067479
This motorcycle amp power kits start with the best quality copper wire available for maximum current delivery and strict adherence to American Wire Gauge standards. Add to that our use of pure oxygen free copper flux-tinned conductors and braided sleeving that deliver excellent corrosion resistance and installation reliability and you have the foundation for an exceptional audio power product. These motorcycle power amp kits are topped off with a unique waterproof mini-ANL fuse block design with machined brass inserts that affords convenient access along with installation security.
*The amp power kits come complete with all the cabling, speaker wires, terminals, disconnects, and fuse blocks needed to perform a quality installation, except for RCA interconnects. Since we offer various levels of high performance RCA interconnects for aftermarket radios and high-level input for OEM upgrades, we leave it up to the consumer/dealer to make the RCA choice.
- 6-ft - 10-gauge power cable.
- 6-ft - 10-gauge ground cable.
- 3-ft - 18-gauge turn-on lead wire.
- 2x 4ft speaker wires.
- In-line waterproof Mini-ANL fuse holder and 30-amp fuse.
UPC Code 033991048645
Kicker PXA300.4 PXA Series 4 Channel Amplifier Made for all environments, PXA-Series Amplifiers are weather-resistant with a conformal-coated circuit board for extra protection against the elements. Small Footprint PXA-Series Power Amplifiers are specifically designed for motorized vehicles with small battery/charging systems, and in an incredibly small footprint that can be installed in motorcycle saddle bags or fairings, glove compartments and other previously unusable spaces. Easy! No-rust, stainless-steel mounting hardware and a single Molex plug containing all wiring connections makes for easy installation. 2 Turn-on Modes PXA Amps utilize a speaker (amplified) or low (pre-amp)-level input, variable input gain adjustment and two auto turn-on modes (DC offset or 12-volt trigger). Real-World Open-Air Sound The sound output is undeniably KICKER. PXA Amps take into account real-world, open-air listening in powersports applications, smartly directing precious power where it succeeds - in the 40-to-250-hertz frequency range where a biker or rider can truly hear and feel it in the open air. It also contains a differential audio circuit that reduces engine noise in the audio system for low T.H.D. (total harmonic distortion) and superb clarity at high volumes.
General Features:
- 4-channel amplifier
- 50 watts RMS x 4 at 4 ohm (75 watts RMS x 4 at 2 ohm)
- 150 watts RMS x 2 at 4 ohms bridged
- frequency response: 10-20,000 Hz
- switchable high-pass filter (60, 80, or 120 Hz at 24 dB/octave)
- preamp and speaker-level inputs as well as two auto turn-on modes
- 8-gauge power and ground leads recommended — wiring and hardware not included with amplifier
- fuse rating: 40A x 1
UPC Code 713034073741