800 Watt Subwoofer, 2x 4" Inch Car Speakers, 2x 6.5" Speaker, Installation Kit
Lanzar VCTBS10 800 Watts Max 10" Super Slim Active Subwoofer
General Features:
- Max power: 800 watt
- RMS Power: 400 watt
- 10'' Slim woofer
- RCA low level input
- High level input
- Green & red LED power status indicator
- Remote level control
- Phase shift switch: 0 or 180°
- Adjustable input sensitivity: 0.2V-3V
- 0 to +12dB variable Bass Boost (@45Hz)
- Low pass filter (50-150 Hz)
- Soft delay remote turn-on
- Thermal, short and overload protection circuits
- Fuse: 2x20A
- Dimension: 15'' X11.8'' X 3''
- Weight: 15.5 LBS.
UPC Code 068888899765
Lanzar Vx430 4" 3-Way 150-Watt Black Car Audio Speakers
The Lanzar 4-inch car speaker includes a neodymium dome tweeter, a poly/plastic woofer, and a 1-inch high-temperature voice coil. The surrounding on this three-way automotive speaker is coated with rubber for a weather-resistant and scratch-resistant outer surface. Furthermore, this Lanzar VX430 is a non-powered, coaxial, non-enclosed speaker that, due to its compact size, can fit into many tight spaces. The range of frequencies the Lanzar 4-inch car speaker responds to starts at 66 Hz and tops out at 20 kHz. In addition, the power handling capability on this three-way automotive speaker measures 75 watts RMS, with a maximum power capacity of 150 watts, and the Lanzar VX430 features and impedance of 4 Ohms. The mounting depth requirement for the Lanzar 4-inch car speaker measures 1.75 inches.
General Features:
- Standard 4'' Size Fits OEM Locations
- Poly-Mica Coated Woofer Cone
- 1'' High Temperature Voice Coil
- Neodymium Dome Tweeter
- Power Handling: 75 Watts RMS/150 Watts Max
- Impedance: 4 Ohms
- Frequency Response: 66-20kHz
- Rubber Boot Magnet Cover
- Mounting Depth: 1.75''
- Includes Grills, Wires and Installation Hardware
UPC Code 068888720779
Lanzar VX6C VX 6.5-Inch Two-Way Custom Component Speaker System
General Features:
- 6.5'' Midbass Driver
- Poly-Mica Coated Woofer Cone
- 1'' High Temperature Voice Coil
- Power Handling: 120 Watts RMS/240 Watts Peak
- Frequency Response: 50-22kHz
- Impedance:4 Ohms
- One Pair Tweeter:
- .5'' Mylar Dome Tweeter
- Neodymium Magnet
- Tri-Way Mounting System: Flush, Swivel, Surface Mount
- One Pair Passive Crossover Network:
- Two-Way Passive Crossovers
- 12 dB Octave Slope
- Silver Plated Connectors
- Fully Protected Circuitry With dB Switch
- Includes Grills, Wires, Diagram, Template and Installation Hardware
UPC Code 068888710688
Enrock Audio 18 AWG Gauge 50 Feet Speaker Wire Cable - CCA Copper Clad Aluminum - For Car & Home Theater Speakers Sytems Installation
The Enrock 8-Gauge Amplifier Installation Kit makes installing your brand new sound system in your car or truck much easier. It includes all of the cables, wires, tubing, ties, grommets and ring terminals that you will need in order to get your new sound system up and running.
The car amp install kit works with a wide range of sound systems and car types and it makes the installation process much simpler by conveniently adding all your supplies to one single kit.
Kit Includes:
- 20 ft. 8 GA Red Power Cable.
- Competition High Quality Fuse Holder.
- 1/4" Ring Terminal.
- 3 ft. 8 GA Black Ground Cable #10 Ring Terminal.
- 16 ft. 18 GA Blue Turn-On Wire.
- 20 ft. High Performance RCA (TRCA) Interconnect (3) Rubber Grommets.
- 30 ft. Speaker Wire 5/16" Ring Terminal.
- 6 ft. Split Loom Tubing (20) 4" Wire Ties.
UPC Code 728120451105
 |
1 Year By Road Entertainment