Refurbished - Kicker 40TCWS104 10-Inch 600W Loaded Subwoofer with Box, Kicker 400 Watt MonoBlock Amplifier and Amp Kit

$478.99
$269.99
(You save $209.00 )
SKU:
R-40TCWS104-3-R500X1D
UPC:
728120510994
Condition:
New
Weight:
36.84 LBS
Shipping:
Calculated at Checkout

Out of stock

Refurbished - Kicker 10-Inch Loaded Subwoofer, Kicker 400 Watt Mono Amp, Amp Kit

Kicker TCompS 40TCWS104 10" 600 Watt Car/Truck Thin Mount Loaded Subwoofer + Box




  • Ported enclosure loaded with one 10" Subwoofer
  • 3/4" medium-density fiberboard construction covered with carpet
  • 4-ohm total impedance
  • power handling: 50-300 watts RMS (600W peak power)
  • frequency response: 30-500 Hz
  • sensitivity: 93.8 dB
  • 21-1/2"W x 15"H x 7-5/8"D1 x 4"D2
  • warranty: 1 year
  • Ported enclosure loaded with one 10" Subwoofer
  • 4 Mounting brackets
  • Four 1" Self-tapping pan head screws
  • Eight 5/8" Self-tapping flat head screws
  • Specification and mounting information

High-performance CompSTM Loaded Enclosures are factory-tuned and vented for loud, great-sounding bass ready to install into a vehicle. Whether it's a single- or dual-sub enclosure that refuses to quit, or a thin-profile box that fits a pickup-truck cab perfectly, high-output CompS Loaded Enclosures provide the most intense bass at the greatest value.

This is ready-made KICKER bass that installs in minutes. Equipped with proven box construction and an impressive bold look, the 10- and 12-inch dual enclosures offer a pair of CompS woofers in a stout MDF box with rounded corners and internal bracing for additional strength and support. A single 12-inch subwoofer is available for under a back hatch, and the 10-inch thin-profile enclosure is perfect for behind the seat or wherever space limitations exist. All enclosures are covered in plush, charcoal-gray carpeting with yellow branding. Slot vents help create ultimate volume.

CompS Subwoofers are founded on engineering that is tried and true, building upon the success of the KICKER's original Competition Series from 1986. They are equipped with a lightweight, injection-molded polypropylene cone and tough, ribbed polyurethane surround for eliminating flex and distortion.


UPC Code 713034064619
Kicker CXA4001 - 400-Watt Mono Class D Subwoofer Amplifier




CX-Series Mono Amps are now one-ohm stable, giving you even more power and wiring options for your system! Using efficient Class-D power, the CXA400.1 features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump with a simple turn of the optional CXARC Remote Bass Controller. A powerful 12dB crossover and 24dB subsonic filter is included, letting you quickly tune your system to perfection. Use the full-range outputs to expand your system with other bass amps, or a full-range amp to complete your system.

CX.1 Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality at the same time!

Expand your system with full-range, RCA pass-through outputs, then choose a “standard” mount or a cool vertical mount with the included hardware.

CX.1 Amps deliver as much as 400 watts into one bass channel.

General Features:

  • Efficient Class-D amplifier
  • Three-second turn-on/off delay to eliminate unwanted interference
  • Variable 12dB crossovers provides control to dial in perfect sound
  • KickEQ™ 6dB variable bass boost for those additional low frequencies
  • 24dB subsonic filter for protection from potentially damaging frequencies
  • FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
  • Accepts up to 40-volt input signal
  • Small footprint for easier installation
  • Compatible with CXARC Remote Bass Control
  • Vertical mounting hardware included for another unique look

Specifications:

  • Power (watts/ch) 4 Ohm: 150x1
  • Power (watts/ch) 2 Ohm: 300x1
  • Power (watts/ch) 1 Ohm: 400x1
  • Input Sensitivity:250mV-10V (Low Level) 1V-40V (High Level)
  • Signal-to-Noise Ratio: 95dB
  • Active Crossover: Variable Lo-pass 50Hz–200Hz, 12dB/octave
  • Subsonic Filter: 25Hz @24dB/octave
  • KickEQ™ Boost: Variable 0-6dB @40Hz​​

UPC Code 713034088516
Enrock Audio 8 Gauge Complete Amplifier Wiring Installation Kit - RCA Interconnect - Speaker Wire Fuse Holder




The Enrock 8-Gauge Amplifier Installation Kit makes installing your brand new sound system in your car or truck much easier. It includes all of the cables, wires, tubing, ties, grommets and ring terminals that you will need in order to get your new sound system up and running.

The car amp install kit works with a wide range of sound systems and car types and it makes the installation process much simpler by conveniently adding all your supplies to one single kit.



Kit Includes:

  • 20 ft. 8 GA Red Power Cable.
  • Competition High Quality Fuse Holder.
  • 1/4" Ring Terminal.
  • 3 ft. 8 GA Black Ground Cable #10 Ring Terminal.
  • 16 ft. 18 GA Blue Turn-On Wire.
  • 20 ft. High Performance RCA (TRCA) Interconnect (3) Rubber Grommets.
  • 30 ft. Speaker Wire 5/16" Ring Terminal.
  • 6 ft. Split Loom Tubing (20) 4" Wire Ties.

UPC Code 728120451105

1 Year By Road Entertainment