2 x Hertz 6.5" Marine Coaxial Speakers w/ LED lighting (White), 2 x Hertz 6.5" 2-Way Speakers (W), Hertz 4-Channel Amplifier, Kicker Weather-Proof Bluetooth Interface Controller, Amp Installation Kit

$690.99
SKU:
R-HMX65LD-HCP4M-HMX65-43PXBTC-PK8
UPC:
728120508052
Condition:
New
Weight:
21.52 LBS
Shipping:
Calculated at Checkout

Out of stock

2 x 6.5" Speakers w/ LED, 2 x 6.5" Speakers, Amp, Controller, Amp Install Kit

Hertz HMX-6.5LD 6.5" 4 Ohm Marine Coaxial Speakers




The HMX 6.5LD Marine Coaxial Speakers with RGB LEDs lighting option is optimized to perform in infinite baffle, with a solid bass and an outstanding output. The HMX tweeters feature an acoustic lens optimized for best off-axis dispersion and maximized SPL. Th attractive stainless steel tweeter mesh grille provides perfect high-frequency transfer and a rock-solid protection. The RGB LED lighting circuit is integrated below the tweeter, protected by a Polypropylene transparent cover acting as light diffusion. The UV-resistant polypropylene cone co-molded with Santoprene rubber surround together with the basket and grille injected with a Hi-temperature and UV resistant polymer neutralize water, dust and mud. The aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The high-excursion mobile equipment is driven by a massive magnetic group, to deliver high undistorted sound pressure.

General Features: 

  • RGB LED Option
  • 6.5" Marine Coaxial Speakers 
  • Tested against UV, salt-fog, vibrations, water spray, thermal shock, and dust
  • 1.4” Neodymium magnet tweeter
  • Acoustic lens optimized for best off-axis dispersion and highest SPL
  • Sound-transparent stainless steel tweeter mesh grille 
  • Long-throw 25mm (1”) voice coil woofer fine-tuned for infinite baffle
  • Polypropylene cone injected with UV inhibitors and co-molded Santoprene surround
  • Aramid fiber spider with silicone-insulated lead wires ensuring durability 
  • FEM optimized high-excursion mobile equipment
  • Marine-grade polymer injected basket
  • Sealed built-in crossover with resettable solid-state tweeter protection circuit 
  • Gold-plated corrosion resistant terminals

UPC Code 8018823122153
Hertz HMX6.5 6.5-Inch 2 Way 75W RMS Marine Speakers 150W Max 4 Ohm WHITE




The HMX 6.5 Marine Coaxial Speakers is optimized to perform in infinite baffle, with a solid bass and an outstanding output. The tweeter feature an acoustic lens optimized for best off-axis dispersion and maximized SPL. The attractive stainless steel tweeter mesh grille provides perfect high-frequency transfer and a rock-solid protection. The UV resistant polypropylene cone co-molded with Santoprene rubber surround together with the basket and grille injected with a Hi-temperature and UV resistant polymer neutralize water, dust and mud. The aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The high-excursion mobile equipment is driven by a massive magnetic group, to deliver high undistorted sound pressure.

General Features: 

  • 6.5" Marine Coaxial Speakers 
  • Tested against UV, salt-fog, vibrations, water spray, thermal shock, and dust
  • 1.4” Neodymium magnet tweeter
  • Acoustic lens optimized for best off-axis dispersion and highest SPL
  • Sound-transparent stainless steel tweeter mesh grille 
  • Long-throw 25mm (1”) voice coil woofer fine-tuned for infinite baffle
  • Polypropylene cone injected with UV inhibitors and co-molded Santoprene surround
  • Aramid fiber spider with silicone-insulated lead wires ensuring durability 
  • FEM optimized high-excursion mobile equipment
  • Marine-grade polymer injected basket
  • Sealed built-in crossover with resettable solid-state tweeter protection circuit 
  • Gold-plated corrosion resistant terminals


UPC Code 018823120807
Hertz HCP 4M Marine 4 Channels Amplifier




The HCP 4M 4 Marine 4 Channels Amplifier feature a compact design ready to face the open water environment, providing tons of clean power. The HCP M heat sink has been crafted from extruded aluminium, a material unmatched for lightness, robustness and heat dissipation. To keep size to a minimum, the power transistors are placed between the PCB and the top side of the heat sink where heat is gathered. Built up heat is then directed to the special dissipation “wings” along the side of the amplifier. Both Pre-In and Speaker-In inputs feature a special balanced circuitry, ensuring high rejection against electro-magnetic interferences for noise-free results. The HCP M amplifiers crossover section ensure extreme flexibility: fully adjustable Lo-pass, Hi-pass filters with 12 dB/Oct. and 24 dB/Oct. slopes according to the amplifier model; Bass Boost is also available to enhance low frequencies. The HCP 4M fourchannel model features also an extended frequency range filter, which can be used when designing active 2-way speaker systems.
  • Tested durable against UV, salt-fog, vibrations, high/low temperature, thermal shock, dust
  • Complete and versatile filter section 
  • Bridge operation mode to drive a subwoofer or to create
    a powerful dual-mono system
  • Bass Boost adjustable via selector, for enhanced low frequencies 
  • Special balanced input circuitry to reject electro-magnetic disturbances
  • Hi-Level and lo-level inputs to be compatible with any source
  • Short-circuit and thermal protections with auto resetting

UPC Code 8018823122108
Kicker 43PXBTC Weather Proof Bluetooth Interface Controller Polaris RZR/ATV/UTV/Cart PXBTC




Add Bluetooth to any audio system with this simple, weatherproof controller. Built as tough as the trails you ride, the 43PXBTC makes it easy to change source, volume or track at any speed - on any terrain.
Get the control you need on the trails you love! Equipped with a stereo RCA output and 3.5mm AUX input, the 43PXBTC Bluetooth Controller automatically pairs with your phone and mutes the music for incoming calls.

Features:

  • KICKER 43PXBTC Bluetooth Interface & Controller PXBTC
  • Frequency Response: (-3db): 20Hz-20KHz
  • THD (250mV 1kHz, AUX input, 2.5V output): <0.01%
  • S/N Ratio (AU-Weight) ref 5V, minimum volume: >100dB
  • 3.5mm Stereo Aux Input sensitivity: 500mV
  • RCA Output Voltage - Max. (1kHz input, 1% THD): 5V
  • Total Mounting Depth: 2-9/16 inch (65 mm)
  • Protrusion from Mounting Surface: 5/8 inch (16 mm)


UPC Code 713034078739
Kicker PK8 8 Gauge OFC Power Amplifier Installation Kit




This Kicker 8 Gauge Power Amplifier Wiring Kit includes all the necessary hardware and wire to power one amplifier and is designed specifically for car audio systems up to 1000 watts. The included premium power/ground cable is made from 100% oxygen-free copper and is true-to-gauge for ultimate power transfer. This PK8 power amp kit includes 17-feet of 8 Gauge power cable, 2-feet of 8 Gauge ground cable, 17-feet of 16 Gauge remote turn-on wire, 2-channel RCA cable, Maxi Fuse holder, 60 Amp fuse and more. KICKER® amp power kits feature top-quality Hyper-Flex™ power, ground and turn-on cables. A heavy-duty AFS fuse holder, fuse, terminals and zip ties come in the kit as well. One additional year of amplifier warranty is included if purchased with a KICKER amp.

Kicker PK8 General Features:

  • 8 Gauge OFC Power Amplifier Installation Kit
  • Designed specifically for car audio systems up to 1000 watts
  • Premium power and ground wire provides optimal power transfer
  • Made from 100% oxygen-free copper for a pure uninterrupted transfer of power
  • Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier

UPC Code 713034064978

1 Year Manufacturer Warranty