KMRD772BT Radio + Accessories, 6.5" Speakers + Parts, Amp + Kit, SiriusXM Tuner
Marine CD Receiver, Bluetooth, Conformal Coated,Wide Positive Background Display, Rear USB, SiriusXM Ready,Spotify, Pandora , iHeart Link for iPhone and Android phone, KENWOOD Music Mix, Remote App Ready, aptX, (3)5Volt Pre-outs
General Features:
- Bluetooth
- built-in MOSFET amplifier (22 watts RMS/50 peak x 4 channels)
- Kenwood remote app
- aptX technology
- Android Open Accessory protocol (AOA)
- plays USB media loaded with MP3, WMA, WAV, and FLAC files
- plays CDs, CD-Rs, and CD-RW discs, including discs loaded with MP3, WMA, and AAC music files
- conformal-coated PCB circuit board
- durable CD slot cover
- Drive EQ
- Sound Reconstruction
- 13-band EQ
- low-pass filter and sub level control
- dual phone capable
- compatible with SiriusXM satellite radio tuner
- inputs: front USB and rear AUX
- outputs: 6-channel preamp outputs
- rear-wired Bluetooth microphone included
UPC Code 019048220172
Looking to switch to Satellite Radio, now is the time. The SiriusXM connect Vehicle Tuner comes with a three months of service free*. This tuner is easy to use and can give any SiriusXM Ready car stereo crystal clear reception. It is so easy to install you will be setup and ready to go in no time; so you never miss a beat. It comes with a magnetic antenna mount, SiriusXM connect Vehicle Tuner, and an installation guide. This tuner is compatible with many different professional car stereo brands like, Advent, Alpine, Car show, Clarion, Dual, Fusion, Garmin, Jensen, Jensen Heavy Duty, Jensen Marine, JVC, Kenwood, Magnadyne, Panasonic, Pioneer, Polk, Rockford Fosgate, Rosen, Sony, West Marine, and Xite Solutions. See above pictures for a complete list of compatible stereo models. *See complete details on the SiriusXM website.
Features:
UPC Code 884720013164
Enrocks EHDRAB98-13 allows you to install a single din receiver into your Harley Touring Bike. The wire harness is included with the dash kit to make wiring more convenient.
- ISO DIN radio provision
- For Harley Davidson Touring 1998-2013
- Designed and manufactured with precision tolerances
- Gapless fit between the dash and the kit
- Harley (FL models with fairings)
Touring 1998-2013
UPC Code 728120484431
Complete kit for select 1996-2013 Harley Davidson (TM) Street Glide, Road Glide and Electra Glide motorcycles. Install a new radio and retain handlebar buttons and program them to control the new radio. Includes the Maestro SW module and the HD1 t-harness in one package.
General Features:
- Wiring adapter/module combo for Harley-Davidson motorcycles bikes
- Allows you to insall a new radio into 1996-2013 Harleys
- Works with a diverse variety of aftermarket radios
- Retains the use of your handlebar audio controls with radios by Alpine, Blaupunkt, Clarion, Dual,
- Eclipse, JVC, Kenwood, Pioneer, or Sony
- Assigns a secondary "press and hold" radio function to each factory button
UPC Code 627780001340
Enrock's EEA720.4 4-channel amplifier was designed compact yet rugged. The outdoors can be a tough spot for audio gear so Enrock considered the salt, spray and sunlight when designing this Class D amplifier. With 45 watts RMS per channel this amplifier will drive your speakers no matter the application you are using it for. It’s compact enough for a bike and powerful enough for a car. You’ll have no trouble hearing your tunes over the wind and waves with this powerful amplifier.
Weather Resistant for Marine Application
Durable and Powerful for Automotive Use
Compact and rugged for Off-Road Installation
This compact amplifier will fit into a storage compartment on a boat, motorcycle, ATV, or car with optimal performance, despite its size. Should you decide to add a pair of subwoofers you can bridge this amp to a 2-channel mode and send 120 watts to each subwoofer, or switch to 3-channel mode to get a pair of speakers and a subwoofer. With high-pass and low-pass filters, plus bass boost, you can customize your sound output just the way you take your tunes.
EE1720 GENERAL FEATURES:
- 4-channel marine/powersports/ car amplifier
- 45 watts RMS x 4 at 4 ohms (60 watts RMS x 4 at 2 ohms)
- 120 watts x 2 bridged at 4 ohms
- Class D amp technology
- 720 Watts Peak Power
- variable high- and low-pass filters
- Sealed Chassis for use in harsh environments
- Ultra-efficient full range class D operation
- Built-in Crossover- maximum flexibility
- 2 or 4 channel input
- Signal to noise radio 97db
- High pass filter 120Hz/80Hz
- Input range: 200mV-10V
- Frequency Response: 20Hz to 20KHz
UPC Code 728120454069
This Kicker 8 Gauge Power Amplifier Wiring Kit includes all the necessary hardware and wire to power one amplifier and is designed specifically for car audio systems up to 1000 watts. The included premium power/ground cable is made from 100% oxygen-free copper and is true-to-gauge for ultimate power transfer. This PK8 power amp kit includes 17-feet of 8 Gauge power cable, 2-feet of 8 Gauge ground cable, 17-feet of 16 Gauge remote turn-on wire, 2-channel RCA cable, Maxi Fuse holder, 60 Amp fuse and more. KICKER® amp power kits feature top-quality Hyper-Flex™ power, ground and turn-on cables. A heavy-duty AFS fuse holder, fuse, terminals and zip ties come in the kit as well. One additional year of amplifier warranty is included if purchased with a KICKER amp.
Kicker PK8 General Features:
- 8 Gauge OFC Power Amplifier Installation Kit
- Designed specifically for car audio systems up to 1000 watts
- Premium power and ground wire provides optimal power transfer
- Made from 100% oxygen-free copper for a pure uninterrupted transfer of power
- Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier
UPC Code 713034064978
Kicker's 43CSC674 speakers feature a 6-3/4" polypropylene woofer that delivers a full sound with the help of a polyester foam surround that will stay strong for years to come. The 1/2" PEI balanced dome tweeter adds crisp instrumental and vocal detail. You'll get good results powering these speakers with a factory radio or an aftermarket car stereo, but they'll knock your socks off when you drive them with an external amplifier. Grilles are included.
The CS Series delivers remarkable performance and ultra-clean bass, utilizing a heavy-duty motor/magnet structure featuring EVC™ (Extended Voice Coil) technology not found in stock speakers. They use polypropylene cones with tough, ribbed, UV-treated surrounds for precise linear excursion and reliability.
Speaker Features:
- Speaker Size: 6 3/4
- Design: 2-way
- Tweeter Design: 1/2" Balanced Dome
- Impedance (Ohms): 3.3
- Tweeter Composition: PEI
- Woofer Composition: Polypropylene
- Woofer Surround: Polyester Foam
- Sensitivity (1W at 1 meter): 90
- Sensitivity at 2.83 volts: N/A
- Frequency Response: 40 - 20k Hz
- Maximum RMS Wattage: 100
- Peak Power Handling (Watts): 300
- Top-mount Depth (Inches): 1 15/16
- Bottom-mount Depth (Inches): 2 1/8
- Cutout Diameter or Length (inches): 5 9/16
UPC Code 713034076056
Enrocks EHDSA98-13 brackets will allow you to install select 6 1/2" or 6-3/4" speakers in the factory speaker openings of select 1998 - 2013 Harley Davison Bikes.
General Features:
- 6-1/2" - 6-3/4" Speaker Adapter Plate
- For 1998-2013 Harley Davidson Touring vehicles
- Designed and manufactured with precision tolerances
- Gapless fit between the speaker and the kit
- Painted to match factory color
- Factory matched texture style
- High-grade ABS plastic construction
- Color: Black
Works in the following applications
- Harley Davidson (FL models with fairings)
Touring 1998-2013
UPC Code 728120484486
This rugged Enrock EKMR2 marine soft wire universal antenna gives you performance, durability and plenty of placement options. The flexible wire makes it the perfect hideaway antenna, while the corrosion-resistant rubber exterior confirms that it will stand up to salt and spray. The 40inch long flexible wire will make mounting it a breeze.
Enjoy your favorite local stations while riding the roads or water with this Enrock EKMR2 Hideaway Antenna.
The Enrock EKMR2 Marine Wire Antenna provides excellent radio reception signals to the audio system on your automobile, watercraft vehicles. Knowledgeable boaters realize that even the most expensive radio will perform poorly with a second rate antenna that saves money up front. A quality antenna is the crux of reliable performance in any marine radio. From the largest seagoing ships to the smallest bass boats, Enrock antennas have held up for years under the worst marine conditions, always performing to their maximum design capabilities.
Check out some of the features of this high quality antenna.
• Weather Resistant.
• 40" Braided Cable.
• Full AM/FM reception.
• No drilling required.
• Simple and easy install.
• Superior construction.
• Easy to mount.
• Motorola plug at one end.
• Compatible with a variety of marine stereo devices.
About Us.
Enrock has established itself as the leader in marine products for boats, yachts, and other vessels since its inception. The Enrock team knows boats by heart, and our products are designed by experts in the field and driven by an inherent intuition of the boater, seasoned or otherwise, would be expecting of life on the water. Enrock's goods and products are individually created with the marine environment in mind. We swallow the droplets and absorb the moisture, so your gear is all ready to face the splash and wind, rays and rough encounters they'll be confronted with during your cruise. We're striving perfection, so for our service and prices to as flawless and wallet-friendly as our products.
Purchase with confidence with our unconditional 30 Day Money Back Guarantee covers every transaction!
Be Sure To Click Add To Cart Now, While There Is Still in Stock.
UPC Code 799861388647
Enrocks's 16-Gauge Speaker Wire is a smart solution to your audio needs since most speakers do not include speaker wires.
This wire comes in 50' Feet to give you convenient installation and pure sound quality enhancement. The cable is tinned and oxygen free copper (OFC) to deliver high-quality sound without any transmission loss.
Marine grade speaker wiring made simple.
Just use high quality marine duplex wiring with it's fine stranded tin plated copper to resist corrosion.
The added benefit of an overall jacket for added protection.
Don't settle for untinned speaker wire where the copper will turn black!
Get long lasting performance from a quality made cable that is designed to last.
General Specifications:
- Connects audio speakers to your Audio Video (A/V) receiver or amplifier.
- Marine grade tinned wire
- Oxygen Free Copper (OFC)
- Features a plastic jacket around the speaker wire helps to deliver high-quality undistorted signals.
- The white line on one side of the wire makes it quick and easy to distinguish the polarity to get your audio system set up properly.
- Comes wrapped around a hard plastic spool that makes dispensing convenient and easy.
- Length: 50 Feet.
- Gauge: 16.
UPC Code 728120479901