Marine Bluetooth Receiver, Remote, 4x 6.5" Speakers, LED Sub, Amp & Install Kit
This 200 watt stereo has all of the audio options from the tried-and-true to the newest technologies guaranteed to amuse boaters on all of their trips. The unit’s app control technology allows boaters to switch all of the stereo’s primary functions directly from their mobile device. Its Bluetooth™ streaming audio (A2DP) and controls (AVRCP) let music lovers to listen to their personal tunes while relaxing on their boat. To further improve the music offerings of this stereo, the MA400 features an AM/FM electronic tuner, full iPod®/iPhone® controls and charging along with SiriusXM satellite radio for a diversity of radio channel options. The MA400 is also armed with a USB input that provides the ability to listen to downloaded music files from a USB device such as jump or thumb drives.
General Features:
- Two-piece modular design (commander and tuner/amplifier module)
- Waterproof commander (IPX6) and module (IPX5)
- App Ready
- Bluetooth®
- SiriusXM-ReadyTM (tuner and subscription required)
- Seven-channel NOAA weatherband
- AM/FM tuner
- USB jack
- Full iPod®/iPhone® controls
- AUX line-level audio input
- Four-channel line-level audio output
- EQ Presets
- Two-wire power system with non-volatile memory
- Wired remote control capable
- Conformal coated circuit boards
- Corrosion resistant materials/finishes
- UV resistant front panel
- Low battery warning
- Regulatory certifications: C-Tick/RoHS
- App control: compatible with both Apple & Android users
UPC Code 728120478393
General Features:
UPC Code 728120478386
Milennia SPK652BSL marine speakers are constructed of solid, weather-resistant material, put together with care and precision, will provide you with a musical and listening experience that will keep you attached to the outdoors.
The SPK652BSL features a corrosion-proof basket that resists deterioration from salt, moisture, and UV rays, while the non-removable grille will maintain its perfect silver matte finish.
- Sold as single speaker
- Waterproof and resistant to rain and splashing
- UV resistance protects against long exposure to the sun
- 150 Watts peak power handling each speaker
- 75 watts RMS (continuous) power handling each speaker
- 4 ohm impedance
- 20 millimeter tweeter
- 6.5” waterproof cone
- Cutout Diameter: 5 ¼”
- Mounting Depth: 2 ½”
UPC Code 728120472599
Jensen 10" 300 Watt Subwoofer by ASA Electronics®. Is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind. It will meet your needs and deliver great quality at an affordable cost.
JENSEN Marine products are specifically designed and tested to withstand unique challenges of the marine world, such as moisture, salt air, humidity, UV exposure, and extreme temperatures.
General Features:
- Power Rating: RMS: 150 watts / Peak: 300 Watts.
- Designed to match rigorous quality standards.
- Corrosion resistant materials.
- UV resistant finish and materials.
- Frequency Response: 20hZ, 1KHz.
- Resonant frequency 35hz.
- LED Light kit.
- Weight: 11 Pounds.
Kit Includes:
- MSW10 Sub-woofer.
- RG10SS Silver grille.
- RG10SB Black grille.
- WG10HQW White grille.
- UMSW1000LK1 LED Light Kit.
UPC Code 681787020988
Enrock's EEA720.4 4-channel amplifier was designed compact yet rugged. The outdoors can be a tough spot for audio gear so Enrock considered the salt, spray and sunlight when designing this Class D amplifier. With 45 watts RMS per channel this amplifier will drive your speakers no matter the application you are using it for. It’s compact enough for a bike and powerful enough for a car. You’ll have no trouble hearing your tunes over the wind and waves with this powerful amplifier.
Weather Resistant for Marine Application
Durable and Powerful for Automotive Use
Compact and rugged for Off-Road Installation
This compact amplifier will fit into a storage compartment on a boat, motorcycle, ATV, or car with optimal performance, despite its size. Should you decide to add a pair of subwoofers you can bridge this amp to a 2-channel mode and send 120 watts to each subwoofer, or switch to 3-channel mode to get a pair of speakers and a subwoofer. With high-pass and low-pass filters, plus bass boost, you can customize your sound output just the way you take your tunes.
EE1720 GENERAL FEATURES:
- 4-channel marine/powersports/ car amplifier
- 45 watts RMS x 4 at 4 ohms (60 watts RMS x 4 at 2 ohms)
- 120 watts x 2 bridged at 4 ohms
- Class D amp technology
- 720 Watts Peak Power
- variable high- and low-pass filters
- Sealed Chassis for use in harsh environments
- Ultra-efficient full range class D operation
- Built-in Crossover- maximum flexibility
- 2 or 4 channel input
- Signal to noise radio 97db
- High pass filter 120Hz/80Hz
- Input range: 200mV-10V
- Frequency Response: 20Hz to 20KHz
UPC Code 728120454069
Get all the wires you need to hook up a new marine audio system with this Pyle Hydra amplifier installation kit. These wires have high resistance to moisture, so they’re a great fit on your boat or in outdoor settings. Included wires: 20 ft. 8-gauge red power wire, 4 ft. 8 gauge black ground wire, 20 ft. 18-gauge blue remote turn-on, 20 f. 12 gauge stereo speaker wire, 20 ft. stereo RCA cable, and 6 ft. black split loom cable conduit. Also includes an AGU type 60A gold-plated fuse, water resistant in-line fuse holder, two 8G ring terminals, two 8G spade terminals, five 14-16G spade terminals, 3 butt connectors, 20 cable ties, and one black grommet.
UPC Code 068888882415
The Enrock 20B AM/FM Antenna includes a flexible mast for durability, along with a 180 swivel base for increased mounting options. It is corrosion resistant and includes 45 inch cable. Flexible mast. Angled mounting options allow you to install the 20B antenna in the most convenient locations. Corrosion resistant for the marine environment.
General Features:
- Marine AM/FM antenna
- Flexible Mast AM/FM Marine Antenna
- 180 degrees Swivel base for maximum mobility and 45 inch cable
- Designed for marine use only
- Angled mounting options allow installation of the antenna in the most convenient locations
- Corrosion resistant for the marine environment
UPC Code 799861390343
Enrocks's 16-Gauge Speaker Wire is a smart solution to your audio needs since most speakers do not include speaker wires.
This wire comes in 50' Feet to give you convenient installation and pure sound quality enhancement. The cable is tinned and oxygen free copper (OFC) to deliver high-quality sound without any transmission loss.
Marine grade speaker wiring made simple.
Just use high quality marine duplex wiring with it's fine stranded tin plated copper to resist corrosion.
The added benefit of an overall jacket for added protection.
Don't settle for untinned speaker wire where the copper will turn black!
Get long lasting performance from a quality made cable that is designed to last.
General Specifications:
- Connects audio speakers to your Audio Video (A/V) receiver or amplifier.
- Marine grade tinned wire
- Oxygen Free Copper (OFC)
- Features a plastic jacket around the speaker wire helps to deliver high-quality undistorted signals.
- The white line on one side of the wire makes it quick and easy to distinguish the polarity to get your audio system set up properly.
- Comes wrapped around a hard plastic spool that makes dispensing convenient and easy.
- Length: 50 Feet.
- Gauge: 16.
UPC Code 728120479901
New EnrockMarine Universal USB/3.5mm Auxiliary Interface Mount & Cable. It measures 3 meters in length, and will convert your AUX inputs to USB, and is UV resistant.
- UV-resistant
- USB to RCA 10" pass-through extension cable
- 1.5" through-hole mount
- Dustproof water-resistant rubber cover
- Use with any radio with rear USB/RCA inputs
- Cable Length: 3m
UPC Code 799861390145