Pyle Wireless Stereo Receiver, Wireless Microphone System, 4x 4" Speakers w/Wire
This Pyle 250-watt amp brings music to the living room with crystal clear clarity. With plenty of inputs, you won't find this amplifier lacking. It features a built-in FM radio with digital LCD display. It's equipped with RCA inputs on the back and two ¼” mic jacks on the front, so you can turn this amp into a karaoke machine.
Pyle Model : PTA24BT
Bluetooth Home Audio Source Amplifier
Compact Bluetooth Home Audio Amplifier, 2-Ch. Audio Source Stereo Receiver System with FM Radio, MP3/USB/SD/AUX Playback (250 Watt)
Features:Bluetooth Connectivity:
What’s in the Box:
Technical Specs:
This 250-watt amp brings music to the living room with crystal clear clarity. With plenty of inputs, you won't find this amplifier lacking. It features a built-in FM radio with digital LCD display. It's equipped with RCA inputs on the back and two ¼” mic jacks on the front, so you can turn this amp into a karaoke machine - even add an echo effect. Easily adjust the volume, balance, treble, bass on the master output for total control of your sound. Remote is already included. Runs on 110 and 220 V AC.
UPC Code 068888777988
The Pyle PDWM2115 VHF Wireless Microphone System includes wireless beltpack transmitter, handheld, headset and lavalier microphones. This wireless system effectively transmits audio signals for active, energetic performances, and is especially great for mobility, where handing off the microphones is a breeze.
General Features:
- VHF Narrow Band Receiver
- Dual Frequency Design (Channel A/B)
- High Signal/Noise Ratio Performance
- Broad Frequency Response Range & Low Distortion
- Independent Adjustable Volume Control
- Volume Control Indicators and Status Signals
- Audio Output Jacks
- Dual Independent Channel Antennas
- RF Signal and AF Signal LED Indicators
- Radio Frequency and Audio Frequency
What's in the Box:
- Receiver Base
- Wireless Handheld Microphone
- Headset Microphone
- Lavalier Microphone
- Beltpack Transmitter
- 1/4'' Audio Connection Cable
- (4) 'AA' Batteries
Transmitter Specifications:
- RF Power Output: >13dBm
- Harmonic at higher Degree: <60dB
- Modulation Degree: >30KHz
- Modulation Pattern: FM
- Power Current: <110mA
- Battery Type: DC 3V
Receiver Specifications:
- Sensitivity: -95dBm (S/N:12dB)
- S/N Ratio: >70dB
- RF Image Rejection:-75dB
- Neighboring Channel / Interference: >70dB
- Audio Dynamic Range:95dB
- T.H.D: <1%
- Operating Range: >50 meters
- Power Source: AC 120V / 60Hz
- Dimensions: 12.7” x 8.5” x 1.9” -inches
- Sold as: 1set
- Weight: 3.85 lbs.
UPC Code 068888754132
The LU47 series speakers are designed as multi-purpose speaker and will deliver accurate high fidelity sound in exterior or interior environments. Weather-resistant design and construction provide optimum durability for permanent or temporary outdoor use.
General Features
- Woofer: Polypropylene with rubber surround
- Non removable grilles
- Rotating logo for versatile mounting options
- Two 1/4-20 insert mounts on rear of each speaker
- UV treated ABS enclosure
- Includeds multi-angle mounting brackets
- Peak: 200W
- RMS: 50W
- Woofer Size: 4"
- Tweeter Size: 20mm
- Frequency Responce: 100Hz-20kHz
- Impedance: 4-6 ohms
- Color: Black
UPC Code 827204212110
EnrockAudio 16-Gauge Speaker Wire
This 16-gauge speaker wire with spool from EnrockBasics lets you easily connect your speakers to amplifiers or receivers.
Marked Polarity
One side of the wire is marked with a white line, making it quick and easy to distinguish the polarity and get your audio system set up properly.
Easy to Use
The EnrockAudio 16-gauge Speaker Wire comes wrapped around a hard plastic spool that makes dispensing convenient and easy.
Details
Connects audio speakers to your A/V receiver or amplifier no distortion. The plastic jacket around the speaker wire helps to deliver high-quality undistorted signals to and from all of your audio equipment.
General Features:
- 50 Feet of 16-gauge speaker wire.
- Connects audio speakers to your A/V receiver or amplifier.
UPC Code 799861390381
