Harley CD AUX Install FLHX FLHTC Adapter Kit Amplifier Set Kicker 6.5" Speakers
JVC's KD-R370 CD receiver delivers strong sound without costing a ton of money. It includes a sensitive AM/FM radio tuner, CD playback with MP3 and WMA compatibility, and a front auxiliary input, so you can hook up your smartphone or portable music player to expand your music options.
JVC included a set of preamp outputs and a low-pass filter, so you can plug in a powered subwoofer to add some oomph to your music. The KD-R370 receiver also features a built-in dimmer and brightness controls, so you can see the info on its single-line display without obnoxious or distracting lights.
- General Features:
- JVC KD-R370 In-Dash Receiver
- Power Output:
- Peak: 50 watts x 4 channels
- RMS: 22 watts x 4 channels
- Theft-deterrent, detachable face plate: Optional Receiver Faceplate Case Available
- CD text information display
- MP3 ID3 Tag Display (Title/Artist/Album)
- AM/FM tuner with 18FM/6AM presets
- CD S/N Ratio: 105 dB
- Playback and Audio Features:
- CD, MP3/WMA/WAV Playback
- 3-band graphic equalizer with 12 selectable tone curves (11 Preset, 1 User)
- 3.5mm Front Audio Auxiliary Input
- 1 Sets of 2.5V preamp outputs (rear/subwoofer)
UPC Code 46838072901
Thinking of replacing your Harley Davidson factory stereo? Scosche HDSWC1 will easily help with your modifications. Adding the HDSWC1 handlebar control interface enables you to connect to an aftermarket stereo while containing the full functionality of your factory steering wheel controls. No need to cut or modify any of your OEM radio connections, this will save you hours of work. It’s a simple seven wire connection for easy radio installation with front speakers. Rear speakers will need separate wires from the radio to the rear speakers
The HDSWC1 works with:
FLHX (Street Glide) 2006-Up
FLTR (Road Glide) 1998-Up
FLHT (Electra Glide) 1998-Up
Handlebar control retention interface
Note:
NO XM RECEVER.
THIS THUMB CONTROL WILL NOT WORK WITH 1996 - 1997 DUAL CONNECTORS RETRO
SOUND SYSTEMS, ADDITIONAL HARDWARE/ADAPTER IS NEEDED (SOLD SEPARATLEY)
UPC Code 033991047471
Installation dash kit for 1996-2012 Harley-Davidson DIN. Add an aftermarket stereo to your bike with this perfect fit dash kit.
Thinking of replacing your Harley Davidson factory stereo? The Scosche HD7000AB will create a smooth transition. This kit is designed with high quality automotive grade ABS plastic to match the texture of your factory dash. The Scosche HD7000AB contains the trim for a single din stereo installation for your Harley Davidson. Check out the compatibility chart to see if this trim is right for you.
• Hi Temp factory grade ASA materiel
• stainless steel hardware with brass inserts
• Neoprene sealing gasket
• Made in USA
• Easy to install. No special tools are required. Includes step-by-step instructions
UPC Code 033991047730
These CS-Series 6-1/2-inch Coaxial Speakers are the perfect way to upgrade your factory speakers.
CS-Series Coaxials deliver remarkable performance and ultra-clean bass with a heavy-duty motor/magnet structure not found in stock speakers. The stamped-steel framework supports a rigid polypropylene cone with EVC (Extended Voice Coil) technology for the best sonic quality. Using zero-protrusion PEI tweeters with neodymium magnets, you get the clarity you need without interfering with factory grilles.
These CS speakers work best with 100 watts of recommended power.
General Features:
- Speaker Design: 2-Way Design
- Woofer Size: 6.5"
- Tweeter Size: .5"
- DC Resistance: 3.3
- 300W Peak Power
- 100W RMS Continuous Power
- 90dB Sensitivity
- 40-20kHz Effective Frequency Range
- 4-13/16" Mounting Hole Diameter
- 3/8" Top Mount Depth
- 1-11/16" Bottom Mount Depth
- Grilles Included
- Fits nearly every car made
- Zero-protrusion tweeters to fit nearly any factory depth
- Woofer EVC™ (Extended Voice Coil) tech assists with precise linear excursion
- UV-treated poly-foam surround resists heat or direct sunlight
- Large woofer magnet in a heavy-duty motor for ultra-clean bass
- PEI-tweeter construction provides superb clarity
- Neodymium tweeter magnets allow for increased volume in high frequencies
- Steel mesh grilles included for speaker protection
UPC Code 713034088363
Extend your speakers out of the factory speaker opening with the Scosche SAHD675B. Speaker Adapters designed for Select Harley Davidson Motorcycles. The Scosche SAHD675B allows you to install 6-1/2" or 6-3/4." speakers in select 1996-up Harley-Davidson motorcycles
General Features
- Speaker adapter for select Harley Davidson Motorcycles
- Converts from 6-1/2" Harley Davidson speakers to standard 6-3/4" speakers
- Includes one pair of adapters
- Adapter Size: 6.5"
- Adapter Size: 6.75"
- Made of durable ABS plastic
Works with: 2006-2013 FLHX Street Glide, 1996-2013 FLHT Electra Glide & 1998-UP FLTR Road Glide models
UPC Code 033991067479
Renegade REN10KIT 10mm^2 Car Audio Complete Amplifier Installation Wiring Kit
General Features:
- 1 x 10 mm^2 Power Wire (red), flexible Strands (0,15 mm), 5 m
- 1 x 10 mm^2 Ground Wire (grey), flexible Strands (0,15 mm), 0.8 m
- 1 x RCA Stereo Audio Cable (blue), double shielded, 5 m
- 1 x 0.5 mm^2 Remote Wire, 5 m
- 1 x AGU Fuse Holder with 40 A ANL Fuse
- Installation Kit
Installation Instructions:
- Disconnect at first the negative ground connection from the vehicle’s battery.
- Connect the GROUND CABLE (brown, 0.8m) with the ground terminal of the amplifier and a suitable GROUND contact point on the car chassis, with a maximum distance of 1 meter from the amplifier. Use the ringterminal for the GROUND contact point. Ensure that all paint or other insulation is removed from around the hole area.
- Find a suitable position for the FUSE HOLDER next to the car battery’s PLUS POLE. The maximum distance should not be more than 30 cm. Please ensure, that you don’t damage any parts of the car, like the fuel tank, wires etc.
- Cut off a part of the POWER CABLE (red, 5m) on one end, which has the same length like the distance from the battery’s PLUS POLE to the FUSE HOLDER (max. 30cm). Connect this part on the end without ringterminal with the FUSE HOLDER (without inserted fuse) and the other end to the battery’s PLUS POLE. Use for the connection the supplied ring terminals.
- Lead one end of the POWER CABLE (red) from the car battery area through the car to the +12V terminal of the amplifier and connect it. Then connect the other end of the cable with the FUSE HOLDER at the suitable terminal.
- Lead the RCA/CINCH CABLE pair with attached REMOTE WIRE from the HEAD UNIT through the car to the amplifier’s position. Then connect the RCA/CINCH plugs on one end with amplifier, and the other end with the HEAD UNIT RCA/CINCH outputs. Please observe the correct polarity of all connections.
- Connect the one end of the attached REMOTE WIRE with the REMOTE/REM terminal of the HEAD UNIT and the other end with the REMOTE/REM terminal of the amplifier. This wire provides a turn on/turn off signal to the amplifier, when the HEAD UNIT is turned on / turned off. NOTE: some amplifier types may require, that you have to extend the REMOTE WIRE with a suitable cable, to lead the REMOTE WIRE to the other endpanel of the amplifier.
- At least insert the FUSE into the FUSE HOLDER. Ensure not to cause a short circuit, or your car’s electric system may get damaged. Do not touch the bare metal parts of the cable or the car battery, otherwise a risk of electric shock consists. Then re-connect the negative ground connection to the vehicle’s battery.
UPC Code 854932002478
Enrock's EEA720.4 4-channel amplifier was designed compact yet rugged. The outdoors can be a tough spot for audio gear so Enrock considered the salt, spray and sunlight when designing this Class D amplifier. With 45 watts RMS per channel this amplifier will drive your speakers no matter the application you are using it for. It’s compact enough for a bike and powerful enough for a car. You’ll have no trouble hearing your tunes over the wind and waves with this powerful amplifier.
Weather Resistant for Marine Application
Durable and Powerful for Automotive Use
Compact and rugged for Off-Road Installation
This compact amplifier will fit into a storage compartment on a boat, motorcycle, ATV, or car with optimal performance, despite its size. Should you decide to add a pair of subwoofers you can bridge this amp to a 2-channel mode and send 120 watts to each subwoofer, or switch to 3-channel mode to get a pair of speakers and a subwoofer. With high-pass and low-pass filters, plus bass boost, you can customize your sound output just the way you take your tunes.
EEA720.4 GENERAL FEATURES:
- 4-channel marine/powersports/ car amplifier
- 45 watts RMS x 4 at 4 ohms (60 watts RMS x 4 at 2 ohms)
- 120 watts x 2 bridged at 4 ohms
- Class D amp technology
- 720 Watts Peak Power
- variable high- and low-pass filters
- Sealed Chassis for use in harsh environments
- Ultra-efficient full range class D operation
- Built-in Crossover- maximum flexibility
- 2 or 4 channel input
- Signal to noise ratio 97db
- High pass filter 120Hz/80Hz
- Input range: 200mV-10V
- Frequency Response: 20Hz to 20KHz
UPC Code 728120454069
