Infinity 6.5" Speaker Set, JBL Amp, Harley FLHT Adapter Bluetooth Receiver Kit
This Kenwood KMM single-DIN digital media receiver comes packed with an array of features sure to boost your vehicle's infotainment system to the next level. This receiver features built-in Bluetooth and USB/AUX inputs to connect to your preferred smart devices. The built-in amp pushes out a maximum power of 50 watts by 4 channels, allowing you to hook up accompanying audio products for an even more impressive sound. Use the Kenwood Remote app to gain convenient control of this receiver through your smart phone!
General Features:
- Built-In Bluetooth
- Dual Phone Connection
- Hands-Free Connection
- KENWOOD Music Mix
- Kenwood Remote App
- FLAC/WAV/AAC/MP3/WMA USB Playback
- 1.5A USB Charging for Android
- 1.0A USB Charge for iPhone
- Spotify Ready
- 13-Band EQ
- Digital Time Alignment
- 2.5V 1 Preout
- AM/FM Tuner
- 4 to 8 Ohms Speaker Impedance
- USB/AUX Inputs
- 50Wx4 Max Power
UPC Code 019048220967
Thinking of replacing your Harley Davidson factory stereo? Scosche HDSWC1 will easily help with your modifications. Adding the HDSWC1 handlebar control interface enables you to connect to an aftermarket stereo while containing the full functionality of your factory steering wheel controls. No need to cut or modify any of your OEM radio connections, this will save you hours of work. It’s a simple seven wire connection for easy radio installation with front speakers. Rear speakers will need separate wires from the radio to the rear speakers
The HDSWC1 works with:
FLHX (Street Glide) 2006-Up
FLTR (Road Glide) 1998-Up
FLHT (Electra Glide) 1998-Up
Handlebar control retention interface
Note:
NO XM RECEVER.
THIS THUMB CONTROL WILL NOT WORK WITH 1996 - 1997 DUAL CONNECTORS RETRO
SOUND SYSTEMS, ADDITIONAL HARDWARE/ADAPTER IS NEEDED (SOLD SEPARATLEY)
UPC Code 033991047471
Installation dash kit for 1996-2012 Harley-Davidson DIN. Add an aftermarket stereo to your bike with this perfect fit dash kit.
Thinking of replacing your Harley Davidson factory stereo? The Scosche HD7000AB will create a smooth transition. This kit is designed with high quality automotive grade ABS plastic to match the texture of your factory dash. The Scosche HD7000AB contains the trim for a single din stereo installation for your Harley Davidson. Check out the compatibility chart to see if this trim is right for you.
• Hi Temp factory grade ASA materiel
• stainless steel hardware with brass inserts
• Neoprene sealing gasket
• Made in USA
• Easy to install. No special tools are required. Includes step-by-step instructions
UPC Code 033991047730
These Infinity Alpha 6530 6.5" speakers are the perfect addition to your vehicle's audio system to bring it to the next level. These speakers feature injection-molded polypropylene cones and have been comeptitively tuned to ensure elite quality sound and great sonic reproduction. With 290 watts of peak power, these speakers are ready to handle all your audio needs.
General Features:
- 6.5" 3-Way Coaxial Speakers
- Power Handling: 40W RMS, 290W Peak
- Injection-Molded Polypropylene Cone
- Competitively Tuned
- Frequency Response: 55Hz-20KHz
- Impedance: 4-Ohms
- Sensitivity (at 2. 83V): 91dB
- Mounting Depth: 2. 25"
UPC Code 050667373023
Extend your speakers out of the factory speaker opening with the Scosche SAHD675B. Speaker Adapters designed for Select Harley Davidson Motorcycles. The Scosche SAHD675B allows you to install 6-1/2" or 6-3/4." speakers in select 1996-up Harley-Davidson motorcycles
General Features
- Speaker adapter for select Harley Davidson Motorcycles
- Converts from 6-1/2" Harley Davidson speakers to standard 6-3/4" speakers
- Includes one pair of adapters
- Adapter Size: 6.5"
- Adapter Size: 6.75"
- Made of durable ABS plastic
Works with: 2006-2013 FLHX Street Glide, 1996-2013 FLHT Electra Glide & 1998-UP FLTR Road Glide models
UPC Code 033991067479
Metra ST-AK8 10GA Power Sport Motorcycle Universal Amplifier Wiring Kit
General Features:
- Designed tor motorcycles
- 6 toot length of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder and 60 amp fuse protected by a black nylon braid
- Pre-terminated ring terminals make connections to the battery simple
- Two 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh makes upgrading the factory speaker wires or adding new speakers a smart choice
- Even for those upgrading the Harmon Kardon system – the ST-AK8 comes with two 47-ohm 1/2 watt resistors to keep the factory radio outputs active
- All the necessary installation hardware is included along wtth a 4 × 6 inch hook and loop mounting pad for micro-amplifiers to hold the amplifier securely in place
UPC Code 086429332267
The Apex Series PA1502 powersports amplifiers deliver efficient Class D power, from an ultra-compact chassis, designed to fit into tight spaces and withstand outdoor environments without missing a beat. Available with 2-channels of output power, the Apex Series PA1502 includes selectable electronic crossover frequency adjustment, with lo-pass capability & selectable bass boost, for quick and easy installation. Plus, it has been engineered for harsh conditions, with power and performance to meet the needs of most audio systems making it the perfect match for all of your JBL car, marine and powersports products.
General Features:
- Max Power: 750W peak
- RMS Power Output @ 2Ω (full-range): 150W x 2, <1% THD+N
- RMS Power Output @ 4Ω (full-range): 100W x 2, <1% THD+N
- RMS Power Output @ 4Ω Bridged (full-range): 300W x 1, <1% THD+N
- Selectable all-/hi-/lo-pass filter: 60-, 80-, 120Hz @ 12dB/octave
- Selectable bass boost: 0-, 6-, 12dB @45Hz
- Frequency Response: 20Hz – 20kHz
- Signal-to-Noise Ratio (full-range): >75dB (ref 1W output @ 4Ω)
- Fuse rating: 25A
- Ultra-compact Aluminum Chassis
- Conformal-Coated PCB
- Big Dynamic Power
- Full-Range Outputs and Selectable
- Crossovers
- High- and low-level inputs
- Harman Standard Reliability Testing
- JBL Industrial Design
UPC Code 050036359115
