Sony MEX-N4300BT Receiver, 4x 6.5" LED Speakers, 10" LED Sub, Amp, Wiring Kit
Keep in touch on the road with Dual Bluetooth connectivity from the MEX-N4300BT. Wirelessly connect your first phone to play music, get directions and communicate with contacts. Add a second phone to make and receive hands-free calls from either phone. Built in 4x55W amplification delivers clear audio playback and plenty of volume. Use voice commands to get directions, play music, and communicate with contacts when connected with your smartphone. This receiver also features CD playback.
General Features:
- EXTRA BASS: Yes (1,2)
- DSO (DYNAMIC STAGE ORGANIZER): No
- OUTPUT POWER: 4 x 55W
- PRE OUT: Rear+Sub
- SUB OUT: Yes
- Front USB/AUX Input
- USB MEDIA TRANSFER PROTOCOL: Yes
- USB ANDROID OPEN ACCESSORY PROTOCOL : Yes (2.0)
- CD Player
- Voice Control Siri Eyes Free and Android
- Sound Synchronized Illumination
- High Pass/Low Pass Filter: 80/100/120
- High Voltage Pre Out: No
- Subwoofer Direct Connection
- 18FM/12AM Presets
- RDS: Yes
- Key Illumination: Yes
- LCD Display
- Built-In Microphone
UPC Code 027242911239
These Infinity KAPPA 6.5" speakers will not only provide great sound but also give your system an impressive visual flair with multi-color RGB LED lighting. Pumping out 300 watts of peak power and 100 watts of RMS power, these speakers will be sure to pump out the sound you want. The durable marine-grade construction makes these speakers perfect for open-environment application!
General Features:
- 6-1/2" 2-way speakers (Pair)
- Marine-Grade
- Multi-Color RGB LED Lights
- Plus One Woofer Cone
- Grille-Mounted Mylar Tweeter
- One-Piece Cast Polymer Basket
- IPX5 Rated for Water Resistance
- Power Handling: 100 watts RMS (300 peak)
- Sensitivity: 92 dB at 2.83 volts
- Frequency Response: 40-25,000 Hz
- Impedance: 3 ohms
- Cutout diameter: 5-5/8"
- Mounting depth: 2-9/16"
- Bulk Packaging
UPC Code 050667373078
This JBL Club Marine Subwoofer is ready to take on your next outdoor adventure. These fully marinized subwoofers not only deliver JBL sound, but also feature RGB lighting to bring the sound to life. Engineered to withstand sun, salt, sea spray and wash downs, they feature sealed motor structure, UV resistant one-piece cast-polymer baskets, a sealed magnet and rubber surrounds. The polypropylene cone and balanced dome tweeter provide great bass, smooth highs and lots of output to ensure every note can be heard loud and clear.
General Features:
- IPx5 Marine-Rating
- Cosmetic Appeal
- Outdoor Performance
- One-Piece Polymer Basket
- Grille-Mounted Tweeters
- Rubber Surrounds
- RGB LED Lighting
- Marine Design
- Balanced Dome Tweeters
- Designed for the Elements
- Harman Standard Reliability Testing
- Individually Voiced
- Power Handling: 250W RMS, 750W peak
- Sensitivity (@ 2.83V): 89dB
- Frequency Response: 25Hz – 500Hz
- Impedance: 4 ohms
UPC Code 050036349932
This Dual 5-channel amplifier is marine-grade and rated IP66, making it the perfect amp system for open sound systems and open-environment applications. With a MOSFET power supply, Class D technology, and 600 watts of peak power, this amplifier will be sure to provide your system with the boost you need for impressive sound.
Class D Technology 5/4/3 Channels Waterproof
lP66 MOSFET power supply
4-Layerconfurmal coated PCB assembly
Variable gain control
Turn-On/Off muting drcuiby(soft mute)
Ground loop isolation input circuit and high-level speakerinp
Bass Boost Adjustment - 0-12d8@50Hz High Pass Crossover{12dB/0ct) - Variable 15-250Hz (FR/RR) - 20kHz Low Pass Crossover (12dB/Oct.) - Variable 35-250Hz (SUB) - 20kHz Fuses: 40A x 2 (ATC-type)
UPC Code 827204112205
Renegade REN10KIT 10mm^2 Car Audio Complete Amplifier Installation Wiring Kit
General Features:
- 1 x 10 mm^2 Power Wire (red), flexible Strands (0,15 mm), 5 m
- 1 x 10 mm^2 Ground Wire (grey), flexible Strands (0,15 mm), 0.8 m
- 1 x RCA Stereo Audio Cable (blue), double shielded, 5 m
- 1 x 0.5 mm^2 Remote Wire, 5 m
- 1 x AGU Fuse Holder with 40 A ANL Fuse
- Installation Kit
Installation Instructions:
- Disconnect at first the negative ground connection from the vehicle’s battery.
- Connect the GROUND CABLE (brown, 0.8m) with the ground terminal of the amplifier and a suitable GROUND contact point on the car chassis, with a maximum distance of 1 meter from the amplifier. Use the ringterminal for the GROUND contact point. Ensure that all paint or other insulation is removed from around the hole area.
- Find a suitable position for the FUSE HOLDER next to the car battery’s PLUS POLE. The maximum distance should not be more than 30 cm. Please ensure, that you don’t damage any parts of the car, like the fuel tank, wires etc.
- Cut off a part of the POWER CABLE (red, 5m) on one end, which has the same length like the distance from the battery’s PLUS POLE to the FUSE HOLDER (max. 30cm). Connect this part on the end without ringterminal with the FUSE HOLDER (without inserted fuse) and the other end to the battery’s PLUS POLE. Use for the connection the supplied ring terminals.
- Lead one end of the POWER CABLE (red) from the car battery area through the car to the +12V terminal of the amplifier and connect it. Then connect the other end of the cable with the FUSE HOLDER at the suitable terminal.
- Lead the RCA/CINCH CABLE pair with attached REMOTE WIRE from the HEAD UNIT through the car to the amplifier’s position. Then connect the RCA/CINCH plugs on one end with amplifier, and the other end with the HEAD UNIT RCA/CINCH outputs. Please observe the correct polarity of all connections.
- Connect the one end of the attached REMOTE WIRE with the REMOTE/REM terminal of the HEAD UNIT and the other end with the REMOTE/REM terminal of the amplifier. This wire provides a turn on/turn off signal to the amplifier, when the HEAD UNIT is turned on / turned off. NOTE: some amplifier types may require, that you have to extend the REMOTE WIRE with a suitable cable, to lead the REMOTE WIRE to the other endpanel of the amplifier.
- At least insert the FUSE into the FUSE HOLDER. Ensure not to cause a short circuit, or your car’s electric system may get damaged. Do not touch the bare metal parts of the cable or the car battery, otherwise a risk of electric shock consists. Then re-connect the negative ground connection to the vehicle’s battery.
UPC Code 854932002478