Dual USB Radio, 3 x 8" Speakers, 10" Subwoofer, LED, Amplifier, amp kit, Antenna
This marinized mechless single DIN receiver will take your audio system to the next level. With 50W x 4 of built-in amplifier power, Bluetooth streaming, USB/AUX inputs, USB charging, you'll be sure to have impressive sound and multiple integration options with your other devices.
General Features:
- Marinized Single DIN Receiver
- Amplifier: 50 Watts x 4
- Built-In Bluetooth
- iPod Compatible
- USB/AUX Inputs
- SiriusXM Readiness
- APP Control
- 2.1A USB Charging
- 2 Zone Speaker Control
- AM/FM Tuner
- Display Color: Grayscale
- Display Type: Backlit LCD
- Fixed Face
- 30 Station presets
- 4 preset EQ Curves
UPC Code 632016082888
These JBL Club Marine Speakers are ready to take on your next outdoor adventure. These fully marinized speakers not only deliver JBL sound, but also feature Multi-Color RGB lighting to bring the sound to life. Engineered to withstand sun, salt, sea spray and wash downs, they feature sealed motor structure, UV resistant one-piece cast-polymer baskets, a sealed magnet and rubber surrounds. The polypropylene cone and balanced dome tweeter provide great bass, smooth highs and lots of output to ensure every note can be heard loud and clear.
General Features:
- IPx5 Marine Rating
- Cosmetic Appeal
- Outdoor Performance
- Product Value
- RGB LED Lighting
- Marine Design
- One-Piece Polymer Basket
- Rubber Surrounds
- Grille-Mounted Tweeters
- Balanced Dome Tweeters
- Designed for the Elements
- Harman Standard Reliability Testing
- Individually Voiced
- Power Handling: 150W RMS, 450W peak
- Sensitivity (@ 2.83V): 92dB
- Frequency Response: 30Hz – 20kHz
- Impedance: 4 ohms
- Bulk Packaging
Wiring Instructions:
Lighting is controlled manually through hardwire connection. Remove the adapter at the end of the speakers to expose the wiring. It will include a Black, Red, Green and Blue wire. When hard wiring the RGB lighting, the black lead is +12V and the Red/Green/Blue leads are ground (-) There are seven colors available through hardwire connection, select your color of choice and proceed with wiring it.
- +12V = Black
- (-) Red = Red
- (-) Green = Green
- (-) Blue = Blue
- (-) Red + Green = Lime Green
- (-) Red + Blue = Magenta
- (-) Blue + Green = Aquamarine
- (-) Red + Blue + Green = Blue/White??
UPC Code 050036346276
This JBL Club Marine Subwoofer is ready to take on your next outdoor adventure. These fully marinized subwoofers not only deliver JBL sound, but also feature RGB lighting to bring the sound to life. Engineered to withstand sun, salt, sea spray and wash downs, they feature sealed motor structure, UV resistant one-piece cast-polymer baskets, a sealed magnet and rubber surrounds. The polypropylene cone and balanced dome tweeter provide great bass, smooth highs and lots of output to ensure every note can be heard loud and clear.
General Features:
- IPx5 Marine-Rating
- Cosmetic Appeal
- Outdoor Performance
- One-Piece Polymer Basket
- Grille-Mounted Tweeters
- Rubber Surrounds
- RGB LED Lighting
- Marine Design
- Balanced Dome Tweeters
- Designed for the Elements
- Harman Standard Reliability Testing
- Individually Voiced
- Power Handling: 250W RMS, 750W peak
- Sensitivity (@ 2.83V): 89dB
- Frequency Response: 25Hz – 500Hz
- Impedance: 4 ohms
- Bulk Packaging
LED Wiring Instructions:
Lighting is controlled manually through hardwired connection. Remove the adapter at the end of the speakers to expose the wiring. It will include a Black, Red, Green and Blue wire. When hard wiring the RGB lighting, the black lead is +12V and the Red/Green/Blue leads are ground (-) There are seven colors available through hardwired connection, select your color of choice and proceed with wiring it.
- +12V = Black
- (-) Red = Red
- (-) Green = Green
- (-) Blue = Blue
- (-) Red + Green = Lime Green
- (-) Red + Blue = Magenta
- (-) Blue + Green = Aquamarine
- (-) Red + Blue + Green = Blue/White
UPC Code 050036349925
Renegade REN10KIT 10mm^2 Car Audio Complete Amplifier Installation Wiring Kit
General Features:
- 1 x 10 mm^2 Power Wire (red), flexible Strands (0,15 mm), 5 m
- 1 x 10 mm^2 Ground Wire (grey), flexible Strands (0,15 mm), 0.8 m
- 1 x RCA Stereo Audio Cable (blue), double shielded, 5 m
- 1 x 0.5 mm^2 Remote Wire, 5 m
- 1 x AGU Fuse Holder with 40 A ANL Fuse
- Installation Kit
Installation Instructions:
- Disconnect at first the negative ground connection from the vehicle’s battery.
- Connect the GROUND CABLE (brown, 0.8m) with the ground terminal of the amplifier and a suitable GROUND contact point on the car chassis, with a maximum distance of 1 meter from the amplifier. Use the ringterminal for the GROUND contact point. Ensure that all paint or other insulation is removed from around the hole area.
- Find a suitable position for the FUSE HOLDER next to the car battery’s PLUS POLE. The maximum distance should not be more than 30 cm. Please ensure, that you don’t damage any parts of the car, like the fuel tank, wires etc.
- Cut off a part of the POWER CABLE (red, 5m) on one end, which has the same length like the distance from the battery’s PLUS POLE to the FUSE HOLDER (max. 30cm). Connect this part on the end without ringterminal with the FUSE HOLDER (without inserted fuse) and the other end to the battery’s PLUS POLE. Use for the connection the supplied ring terminals.
- Lead one end of the POWER CABLE (red) from the car battery area through the car to the +12V terminal of the amplifier and connect it. Then connect the other end of the cable with the FUSE HOLDER at the suitable terminal.
- Lead the RCA/CINCH CABLE pair with attached REMOTE WIRE from the HEAD UNIT through the car to the amplifier’s position. Then connect the RCA/CINCH plugs on one end with amplifier, and the other end with the HEAD UNIT RCA/CINCH outputs. Please observe the correct polarity of all connections.
- Connect the one end of the attached REMOTE WIRE with the REMOTE/REM terminal of the HEAD UNIT and the other end with the REMOTE/REM terminal of the amplifier. This wire provides a turn on/turn off signal to the amplifier, when the HEAD UNIT is turned on / turned off. NOTE: some amplifier types may require, that you have to extend the REMOTE WIRE with a suitable cable, to lead the REMOTE WIRE to the other endpanel of the amplifier.
- At least insert the FUSE into the FUSE HOLDER. Ensure not to cause a short circuit, or your car’s electric system may get damaged. Do not touch the bare metal parts of the cable or the car battery, otherwise a risk of electric shock consists. Then re-connect the negative ground connection to the vehicle’s battery.
UPC Code 854932002478
This Dual 5-channel amplifier is marine-grade and rated IP66, making it the perfect amp system for open sound systems and open-environment applications. With a MOSFET power supply, Class D technology, and 600 watts of peak power, this amplifier will be sure to provide your system with the boost you need for impressive sound.
Class D Technology 5/4/3 Channels Waterproof
lP66 MOSFET power supply
4-Layerconfurmal coated PCB assembly
Variable gain control
Turn-On/Off muting drcuiby(soft mute)
Ground loop isolation input circuit and high-level speakerinp
Bass Boost Adjustment - 0-12d8@50Hz High Pass Crossover{12dB/0ct) - Variable 15-250Hz (FR/RR) - 20kHz Low Pass Crossover (12dB/Oct.) - Variable 35-250Hz (SUB) - 20kHz Fuses: 40A x 2 (ATC-type)
UPC Code 827204112205
The Enrock EKMR2 Marine Wire Antenna provides excellent radio reception signals to the audio system on your automobile, watercraft vehicles. The flexible wire makes it the perfect hideaway antenna, while the corrosion-resistant rubber exterior confirms that it will stand up to salt and spray. The 40inch long flexible wire will make mounting it a breeze. Knowledgeable boaters realize that even the most expensive radio will perform poorly with a second rate antenna that saves money up front. A quality antenna is the crux of reliable performance in any marine radio. From the largest seagoing ships to the smallest bass boats, Enrock antennas have held up for years under the worst marine conditions, always performing to their maximum design capabilities.
General Features:
- Weather Resistant.
- 40" Braided Cable.
- Full AM/FM reception.
- No drilling required.
- Simple and easy install.
- Superior construction.
- Easy to mount.
- Motorola plug at one end.
- Compatible with a variety of marine stereo devices.
UPC Code 799861388647
Enrock's 16-Gauge Speaker Wire is a smart solution to your audio needs since most speakers do not include speaker wires.This wire comes in 50' Feet to give you convenient installation and pure sound quality enhancement. The cable is tinned and oxygen free copper (OFC) to deliver high-quality sound without any transmission loss. Marine grade speaker wiring made simple. Just use high quality marine duplex wiring with it's fine stranded tin plated copper to resist corrosion.
The added benefit of an overall jacket for added protection.
Don't settle for untinned speaker wire where the copper will turn black!
Get long lasting performance from a quality made cable that is designed to last.
General Specifications:
- Connects audio speakers to your A/V receiver or amplifier.
- Marine grade tinned wire
- Oxygen Free Copper (OFC)
- Features a plastic jacket around the speaker wire
- The white line one one side to mark polarity
- Wrapped around a hard plastic spool
- Length: 50 Feet.
- Gauge: 16.
UPC Code 728120479901