MM 6502 6-1/2" component speaker system only improves on Polk's well-earned reputation.The titanium-coated 6-1/2" polymer component woofer cone, backed by a space-efficient magnet, delivers the full sound you've been hungry for. A low-profile, lightweight carbon basket features excellent venting to keep these speakers cool when you're really pouring on the power. And your music's high frequencies will soar, thanks to delicate handling by the newly designed separate 1" Terylene fabric dome tweeter.
The Premium Upgrade
Tuned for the total sonic accuracy you get in a
studio monitor speaker, the MM1 Series reconfigures this high-quality
sound for an on-the-go experience that's way beyond anything you'll hear
in an OEM factory setup.
Engineered for High-Performance Sound
Every element of the MM Series is meticulously engineered for
high-performance sound-Dynamic Balance technology, pivoting 1" terylene
tweeter, lightweight neodymium motor structure, high-temp Conex spiders
and oversized voice coils for increased
power handling.
Ultra-Marine Certified
Featuring an IP56 rating that includes a non-corrosive fiberglass
reinforced ABS basket, epoxy coated crossovers, water-proof inner and
outer surrounds, weep holes for proper drainage and titanium-plated
cones, you get extra, long-lasting protection- that's all salt-fog and
UV tested.
Dynamic Balance Technology
Patented process that
guides material selection through rigorous testing that identifies and
cancels out unwanted resonant frequencies.
MM6502 SPEAKERS
component speaker system includes 2 woofers, 2 tweeters, 2 external crossover networks, and mounting gear
6-1/2" titanium coated polymer woofer cone with Santoprene rubber surround
1" Terylene fabric dome tweeter
certified for marine use (IP56 rating)
non-corrosive fiberglass reinforced ABS basket
epoxy coated crossovers
waterproof surrounds
weep holes for proper drainage
handles up to 125 watts RMS (375 watts peak power)
frequency response: 35-40,000 Hz
sensitivity: 93 dB
woofer top-mount depth: 2-5/8"
Features:
Polk Audio MM6502 6.5" 750 Watt Component Car/Marine/ATV/Motorcycle Speakers
Driver Compliment: 6.5" (165.2 mm)
Tweeter Compliment: 1" (25mm)
Cutout Dimensions: 5" (127mm)
Mounting Height: 0.32" (8.07mm)
Mounting Depth (Top): 2.62" (66.5mm)
Mounting Depth (Bottom): 2.86" (72.6mm)
Peak Power Handling: 375 Watts per speaker
Continuous Power Handling: 125 Watts per speaker
Nominal Impedance: 4 Ohms
Grille Height: 0.95" (24.2mm)
Frequency Response: 35Hz-40kHz
Sensitivity: 93 dB
Magnet Weight: 1.38/0.15 oz
Magnet Material: Neodymium
Magnet Size: 29.5mm x 5mm x 12/24mm x 5mm x 2mm
VC Diameter: 1.2"
UPC Code 747192128043
Polk 2 Channel Amplifier 300 Watts Max Bass Boost Switch Speaker level input connects 2 ohm stable stereo operation is capable of driving virtually all automotive speakers. High-speed MOSFET switching power supply and high current bipolar output transistors Double layer fiberglass epoxy printed circuit boards for more rigidity, less shrinkage and a smaller overall amp footprint. 6-way Smart System Protection (SSP) circuits Selectable 12 dB/octave high or low-pass crossover with fixed crossover frequency. Switchable 3-position bass boost (0dB, 6dB, 12dB) for extra bass thump. Variable input gain optimizes match with different signal sources (175mv to 8V). RCA outputs for easy daisy chaining of other amplifiers. Mounting hardware with rubber isolation grommets and extra fuse included.
AMPLIFIER
Speaker level input connects 2 ohm stable stereo operation is capable of driving virtually all automotive speakers.
High-speed MOSFET switching power supply and high current bipolar output transistors
Double layer fiberglass epoxy printed circuit boards
6-way Smart System Protection (SSP) circuits
Selectable 12 dB/octave high or low-pass crossover with fixed crossover frequency.
Switchable 3-position bass boost (0dB, 6dB, 12dB) for extra bass thump.
Variable input gain optimizes match with different signal sources (175mv to 8V).
RCA outputs for easy daisy chaining of other amplifiers.
Mounting hardware with rubber isolation grommets and extra fuse included.
Multi-color status LED gives instant information on amplifier operation.
UPC Code 747192120702
The Enrock 8-Gauge Amplifier Installation Kit makes installing your brand new sound system in your car or truck much easier. It includes all of the cables, wires, tubing, ties, grommets and ring terminals that you will need in order to get your new sound system up and running.
The car amp install kit works with a wide range of sound systems and car types and it makes the installation process much simpler by conveniently adding all your supplies to one single kit.
Kit Includes:
- 20 ft. 8 GA Red Power Cable.
- Competition High Quality Fuse Holder.
- 1/4" Ring Terminal.
- 3 ft. 8 GA Black Ground Cable #10 Ring Terminal.
- 16 ft. 18 GA Blue Turn-On Wire.
- 20 ft. High Performance RCA (TRCA) Interconnect (3) Rubber Grommets.
- 30 ft. Speaker Wire 5/16" Ring Terminal.
- 6 ft. Split Loom Tubing (20) 4" Wire Ties.
UPC Code 728120451105
 |