4x Soundstream MCS.65 6.5" Black Speakers, Amp w/ Kit, Bluetooth Controller
These MCS 6.5" coaxial speakers are a necessity to rockin’ out in your boat or off-road vehicle. Using the same critical moisture and UV resistant Centrex material of the WTS wake tower enclosures, you can bet they withstand extreme outdoor conditions. Everyone will hear you coming thanks to ultra-light weight blended polypropylene-mica cones and ear piercing titanium dome tweeter. Each speaker set includes matching gloss black grills with anodized aluminum mesh, and are pre-wired to install optional RGB LED grill rings. With 200W of peak power and 100W RMS power, you can be sure that these speakers will provide an impressive sonic output to optimize your listening experience!
General Features:
- 6.5" 2-Way Coaxial Design
- 200W Max Power
- 100W RMS Power
- Efficiency (1w/1m dB): 89.30 dB
- Mounting Depth: 3.50"
- Injection Molded Frame & Grill
- Electro-Magnetic Components Sealed Internally
- Brushed Aluminum Grill Mesh
- Injection Molded Polypropylene-Mica Composite Cone
- 25” Extreme Temperature Tolerant Voice Coil w/ Epoxy Coating
- 1” Formed Titanium Extended Frequency Range Dome Tweeter
- Closed-back Coaxial Tweeter w/ Isolated Electrical Connections
- Chemical/UV Resistant Thermo-Formed Rubber Gaskets & Surround
- Prewired Connection Terminals for LED Light Rings (Sold Separately)
- Matching Gloss Black Grills
UPC Code 632016069445
Metra PowerSports introduces this new micro-amplifier that is designed to be used in some harsh environments. With an IP rating of IPX6 the amplifier is designed to get wet and not miss a beat. This 4-Channel amp is bridgeable to provide more flexibility. The input side of the amplifier has an 8ft cable with an IP68 connector that is designed to plug directly into the MPS-BTK Bluetooth controller (sold separately). The amplifiers come with a pigtail that allows the user to use any radio or Bluetooth controller with an RCA output with these amplifiers if the MPS-BTK is not being used. The power cables are 8ft long with a waterproof fuse holder to reach any battery location whether it be in a side-by-side or motorcycle.
General Features:
- Adjustable 12db high pass/low pass crossovers
- CHIPSET: Full Range Class D using IR (International Rectifier) control chips
- PCB BOARD: 4 layer conformal coated
- WATER RESISTANCE: IPX6
- CROSSOVER POINTS: 40 Hz to 500Hz
- THD: .07 percent
- S/N RATIO (1 WATT @ 4 OHMS) : > 90db
- GAIN RANGE: .2 volts – 5 volts
- FREQ RANGE: 20 Hz – 20 KHz
- FUSE HOLDER: IP68 rated
- FUSING: 40 amp (Dual 20 AMP fuses)
- W 7.519in/191MM
- H 1.54in/39.2MM
- D 4.18in/106.4MM
- 60 WATTS RMS X 4 CHANNELS at 4 OHMS
- 90 WATTS RMS X 4 CHANNELS at 2 OHMS
- 180 WATTS RMS X 2 CHANNELS at 4 OHMS
UPC Code 086429350759
The MPS-BTK1 Bluetooth Wireless Controller is equipped with a built-in line driver that triples the voltage input so the audio sounds great no matter the source. This controller features Bluetooth connectivity to give you complete wireless connection. A Universal adapter is included so you can use this product with other amplifiers as well.
General Features:
- Must use with MPS-AMP850-5D, MPS-AMP125-4D and MPS-AMP200-2D
- Fits industry standard opening: 1.45in x .83in
- One knob does all control features: track/volume/power/source/play/pause/pairing (Patented)
- Complete wireless connection via Bluetooth® 4.0
- Play music from any media player with 3.5mm auxiliary output
- Remembers paired devices and automatically reconnects in connected order when device is present
- Built-in line driver for 3X voltage output
- Single wire controller connection directly to a Metra Powersports amplifier for complete control (10PIN DIN)
- Universal adapter included for use with other amplifiers
UPC Code 086429368716
Metra ST-AK8 10GA Power Sport Motorcycle Universal Amplifier Wiring Kit
General Features:
- Designed tor motorcycles
- 6 toot length of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder and 60 amp fuse protected by a black nylon braid
- Pre-terminated ring terminals make connections to the battery simple
- Two 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh makes upgrading the factory speaker wires or adding new speakers a smart choice
- Even for those upgrading the Harmon Kardon system – the ST-AK8 comes with two 47-ohm 1/2 watt resistors to keep the factory radio outputs active
- All the necessary installation hardware is included along wtth a 4 × 6 inch hook and loop mounting pad for micro-amplifiers to hold the amplifier securely in place
UPC Code 086429332267