Kicker 12" Loaded Subwoofer Enclosure, 6.5" Speakers, 2-Ch Amplifier, Amp Kit
Kicker's DXA125.2 features separate controls that work with a variety of different speakers or subs. A high-pass filter clears rumble from small speakers so they can play more efficiently, while a low-pass filter adjusts the frequencies going to your sub, so it'll play bass cleanly. A bass boost lets you add some extra foundation to your sound if you want.
The DXA125.2 2-channel amplifier can send 30 watts RMS each to a pair of speakers from a compact chassis that'll fit into a lot of places in your vehicle. This amp delivers around three times the power of a typical factory radio, so it'll add a lot of clarity and punch to your music. You can also use the DXA125.2 in bridged mode to power a subwoofer with 125 watts RMS.
- General Fetaures:
- Class AB amp technology
- Power Rating:
-30 watts RMS x 2 at 4 ohms.
-60 watts RMS x 2 at 2 ohms.
-125 watts RMS x 1 bridged at 4 ohms. - CEA-2006 compliant.
- Signal-to-noise ratio: >95dB.
- variable high- and low-pass filters (50-200 Hz, 12 dB/octave)
- variable bass boost (0-12 dB at 40 Hz)
- differential-balanced inputs help eliminate noise.
- preamp and speaker-level inputs.
- Fail-Safe Integration Technology.
- Advanced circuitry for superior power, clarity and dependability.
- Dimensions: 8-1/8"W x 7-3/16"D x 2-3/8"H
UPC Code 713034078715
This Kicker 8 Gauge Power Amplifier Wiring Kit includes all the necessary hardware and wire to power one amplifier and is designed specifically for car audio systems up to 1000 watts. The included premium power/ground cable is made from 100% oxygen-free copper and is true-to-gauge for ultimate power transfer. This PK8 power amp kit includes 17-feet of 8 Gauge power cable, 2-feet of 8 Gauge ground cable, 17-feet of 16 Gauge remote turn-on wire, 2-channel RCA cable, Maxi Fuse holder, 60 Amp fuse and more. KICKER® amp power kits feature top-quality Hyper-Flex™ power, ground and turn-on cables. A heavy-duty AFS fuse holder, fuse, terminals and zip ties come in the kit as well. One additional year of amplifier warranty is included if purchased with a KICKER amp.
Kicker PK8 General Features:
- 8 Gauge OFC Power Amplifier Installation Kit
- Designed specifically for car audio systems up to 1000 watts
- Premium power and ground wire provides optimal power transfer
- Made from 100% oxygen-free copper for a pure uninterrupted transfer of power
- Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier
UPC Code 713034064978
Kicker's 43VC124 Comp sub features a stiff injection-molded polypropylene cone supported by a double-stitched ribbed foam surround for deep excursion. Kicker's back-braced cone design keeps the woofer stable during those hard hits, while the perimeter venting system helps cool the sub's internal parts during demanding performances. A strong steel basket provides a stable foundation that won't flex during hard use.
This VC124 loaded enclosure puts a thumping 12" subwoofer behind your music. The rugged ported box was designed specifically for the subwoofer, so you can count on getting maximum performance
- General Features:
- Handles up to 150 watts RMS (300 watts peak power)
- Ported enclosure with one 12" Comp subwoofer.
- Tough KICKER wood enclosure.
- Dense gray carpeting.
- Monogrammed, carbon-fiber front baffle.
- 3/4" medium-density fiberboard construction covered with carpet.
- Ready-made, outrageous KICKER bass.
- Easy-to-use impedance designated at the terminal cup assembly.
- Injection-molded, polypropylene cone with bracing eliminates distortion.
- 4-ohm impedance.
- Frequency response: 27-300 Hz.
- Sensitivity: 95 dB.
- Top Depth: 11-1/4"
- Bottom Depth: 14-5/8"
- Dimensions: 17-11/16"W x 16-1/8"H x 14-5/8"D1 x 11-1/4"D2.
UPC Code 713034078678
These CS-Series 6-1/2-inch Coaxial Speakers are the perfect way to upgrade your factory speakers.
CS-Series Coaxials deliver remarkable performance and ultra-clean bass with a heavy-duty motor/magnet structure not found in stock speakers. The stamped-steel framework supports a rigid polypropylene cone with EVC (Extended Voice Coil) technology for the best sonic quality. Using zero-protrusion PEI tweeters with neodymium magnets, you get the clarity you need without interfering with factory grilles.
These CS speakers work best with 100 watts of recommended power.
General Features:
- Speaker Design: 2-Way Design
- Woofer Size: 6.5"
- Tweeter Size: .5"
- DC Resistance: 3.3
- 300W Peak Power
- 100W RMS Continuous Power
- 90dB Sensitivity
- 40-20kHz Effective Frequency Range
- 4-13/16" Mounting Hole Diameter
- 3/8" Top Mount Depth
- 1-11/16" Bottom Mount Depth
- Grilles Included
- Fits nearly every car made
- Zero-protrusion tweeters to fit nearly any factory depth
- Woofer EVC™ (Extended Voice Coil) tech assists with precise linear excursion
- UV-treated poly-foam surround resists heat or direct sunlight
- Large woofer magnet in a heavy-duty motor for ultra-clean bass
- PEI-tweeter construction provides superb clarity
- Neodymium tweeter magnets allow for increased volume in high frequencies
- Steel mesh grilles included for speaker protection
UPC Code 713034088363