AudioControl DM-608 Premium Matrix 6 By 8 Channel Digital Signal Processor Bundle Combo with Option Port High Definition Bluetooth Programmer

The powerful DM-608 processor allows users to truly optimize the performance of their audio system, regardless of whether they are using a factory or aftermarket source, and to truly achieve the goal of “Making Good Sound Great”.

These highly versatile Digital Signal processors are equipped with key features, such as active speaker level inputs, line-level and digital audio inputs, providing up to 8 channels of output. AudioControl’s “smart user” interface contains the power of AudioControl processing through a flexible PC interface packed full of features in a simple lay out. Configure signal summing, 30 bands of equalization, signal time-alignment, input delay and phase correction, plus AudioControl proprietary features like AccuBASS, GTO Signal Sense, and MILC as well as integrated input and output RTA’s.

The built in Option Port on the DM-608 is the future of car audio and will allow hi-res streaming directly into the DSP. It also opens up future proprietary connections for additional inputs, controllers and interface solutions.

General Features:

• Input and Output RTA for precise and informed tuning
• GTO Signal Sensing
• MILC Clip Detection
• AccuBASS
• Signal Summing
• Signal Delay
• 12 and 24 dB/octave crossovers
• 30 band equalizer
• Optional ACR-3 remote for preset recall and level control
• Optional AC-BT24 Bluetooth Streamer/Programme
• Preamp Input Channels: 6
• Digital Inputs: 1 x Toslink and Coax
• Input Impedance Preamp / Speaker-level: 20 kΩ / 7 kΩ
• Preamp Outputs Channels: 8
• Maximum Output Level: 10 Vrms
• Output Impedance: 150 Ω
• Total Harmonic Distortion: 0.01%
• Frequency Response: 20 Hz to 24 kHz
• Crossover Frequency: variable
• Crossover Type: 12 and 24 dB/octave Linkwitz-Riley
• 12 VDC Remote In
• 12 VDC Remote Out (always active when unit is on)
• Power Supply: High Headroom PWM Switching
• Current Draw: 1A
• Recommended Fuse Rating: 3A
• Dimensions: 9.4”W x 5.7”D x 1.6”H
• Weight: 2.4lbs (1.1kg)

The AC-BT24 enables high definition Bluetooth® audio streaming (aptX HD support) and programming for AudioControl DSP products featuring the Option Port. Stream hires audio directly to DM Series DSPs, D Series amplifiers, or connect via Bluetooth and the DM Smart DSP app for initial programming and setup. The AC-BT24 also allows for wireless control of the AudioControl DM-RTA via the DM-RTA app for iOS and Android.

General Features:

• High Definition Low-Latency Audio Streaming
• aptX HD Support
• 24 bit / 48 kHz Audio Streaming from Devices with aptX Codec
• Wireless DSP Programming via DM Smart DSP™ app for iOS/Android
• Simultaneous Audio Streaming and DSP Programming
• Compatible with: DM-810, DM-608, D-6.1200, D-4.800, D-5.1300, DM-RTA
• Bluetooth Version: 4.2
• aptX HD Compatible
• UART Interface
• Dual Differential Class AB Output Stage
• Signal to Noise Ratio: 96 dB
• Maximum Data Rate: 3 Mbps (typical 1.6 Mbps)
• Operating Range: 10+ meters (depending on environment)
• Power Requirements: Provided by Option Port
• Dimensions: 1.4”L x 1.0”W x 0.5”H
• Weight: 0.3 oz (9 g)