Kenwood Receiver, 2 x 6.5" 2-Way Speakers, 4-Channel Amp, Dash Kit, Accessories
Want to get the most out of your car's receiver, then the Kenwood KDCBT33 is the unit you're looking for! Bright variable color LED's can be adjusted to match any color dash lighting. Simply install the Kenwood Music Play application onto your Android™ smartphone, connect it to your KENWOOD receiver via USB, and control your music directly from the car monitor receiver.Rapidly charge your compatible Android smartphone with the USB port, up to a maximum of 1.5A.Allows two phones to be connected for hands-free operation at any time. Easily switch between both phones with the touch of a button. Answering, calling or searching your phonebook on your phone is made simple through an intuitive GUI.Up to 5 Bluetooth® devices can be connected to the head unit at the same time, and you can enjoy audio streaming just by switching the devices with your friends or family.A smartphone application can control most basic functions of the receiver over the Bluetooth connection of the paired phone (iPhone or Android).Search and select songs from your music collection through a Bluetooth® connection.13-Bands of equalization offer detailed audio tuning to match your taste and listening environment.Boosts specific frequencies in the audio signal to overcome the negative impact of road noise.
General Features:
- TDF(Theft Deterrent Faceplate)
- Drive Change
- Variable Color Illumination
- Front USB and AUX
- 3 Preouts 2.5V
- Maximum Output Power : 50W x 4 (MOSFET Power IC)
- Kenwood sound reconstruction, restores musical to compressed music
- MP3/WMA/AAC/WAV/FLAC Files Playback with ID-3 Tag Display
- Android Rapid Charge
- Multi language(English, Spanish)
- Dual Phone Connection
- Wireless Music Browsing
UPC Code 019048224408
DB652 2-way speakers feature a 6-1/2" polypropylene woofer cone with a strong rubber surround for solid playback and resilience under the environmental stress that comes with living in your car doors. A 3/4" silk dome tweeter delivers smooth highs with precision to give you a vibrant soundstage, while a built-in crossover keeps the highs and lows flowing to the proper drivers.With power handling up to 100 watts RMS, you'll do fine driving this system with an aftermarket receiver, but these speakers will reach peak performance if you power them with a nice amp.
Everything you love about Polk's Dynamic Balance technology -that rich,
clean, full-range sound-is built into the marine-tough, yet ruggedly
sophisticated, DB+ series. And with its universal fit, it can be
installed in any vehicle: Automobiles, motorcycles, boats, ATVs-you name
it. Upgrade from your OEM speaker system toward a bigger, fuller,
high-performance sound. The high-grade materials used in our DB+ Series
ensure you get an audio system that's designed and engineered for clear,
full range sound that will last much longer than your factory setup.
These speakers also feature non-resonant materials so you get extremely
clear highs, mids, and lows no matter what you're listening to through
our patented Dynamic Balance (DB) Technology. The new DB+ series has
been updated so you can enjoy a simple drop in installation in any
vehicle including cars, boats, ATV's -- you name it. Its new shallow
tweeter design ensures your factory speaker grille re-installs with ease
for a flush, seamless look. This quick and easy experience also ensures
a faster installation process so you can get back to what matters with
our great sound always along for the ride. The DB+ Series is IP65 rated
so it's dirt and water- resistant. It also has been tested for salt-fog,
UV and humidity. A big part of that marine certification also means
that each speaker has a non-corrosive plastic grille, a polypropylene UV
tolerant cone, waterproof inner and outer surrounds, and stainless
steel mounting hardware, ensuring that it's fully protected against the
elements.
SPEAKERS
2-way car speakers (pair)
marine certified — recommended for fresh water and powersports applications
6-1/2" polypropylene woofer cone with rubber surround
3/4" silk dome tweeter
handles up to 100 watts RMS (300 watts peak power)
frequency range: 40-22,000 Hz
sensitivity: 92 dB
top-mount depth: 1-13/16"
grilles included
includes adapter rings for 6-3/4" openings
UPC Code 747192127268
Kenwood's KAC-M1804 4-channel amplifier will pump up your car's audio system with 45 watts RMS per channel — that's more than twice the power of most car stereos. The super-compact KAC-M1804 will add new clarity and impact to the basic sound system of almost any kind of vehicle on land or water, and it'll fit in a lot of places when space is tight. The amp uses plastic covers to protect its connections and features a conformal coated circuit board that keeps out moisture and salt, so the party won't stop just because of a little wetness.
UPC Code 019048207777
Enrocks EHDRAB98-13 allows you to install a single din receiver into your Harley Touring Bike. The wire harness is included with the dash kit to make wiring more convenient.
- ISO DIN radio provision
- For Harley Davidson Touring 1998-2013
- Designed and manufactured with precision tolerances
- Gapless fit between the dash and the kit
- Harley (FL models with fairings)
Touring 1998-2013
UPC Code 728120484431
This Metra part will allow you to connect your car's steering wheel audio controls to select aftermarket stereos.
Metra Harley Davidson HD-ASWC1 Handle Bar Controls (1998-2013) Features
- Fits 1998-2013 Harleys that have handlebar radio controls
- Uses patented auto-detect system to configure itself for which bike it is used in and which radio is connected to it
- Comes with plug-n-play harness
- Provides wires for speakers – constant power – switched power and ground
UPC Code 086429348831
Protect your new radio from the dirt and weather found on the open road with this handy Radio Shield from Scosche. The cover's frame fits in your bike's single-DIN opening, and you can then push the cover over your receiver. A unique O-ring seals the cover tightly around your receiver, so you can stop worrying about dust and water getting into the electronics.
High-quality tinted cover protects an aftermarket radio from the elements
Fits in the factory dash opening rather than the radio mounting surface
Does not hinder access to radio controls or functionality • Optimal glare reduction and readability in both daytime and nighttime
Made in the USA with high grade UV stable acrylic that is impact and scratch resistant
UPC Code 033991048560
Enrocks EHDSA98-13 brackets will allow you to install select 6 1/2" or 6-3/4" speakers in the factory speaker openings of select 1998 - 2013 Harley Davison Bikes.
General Features:
- 6-1/2" - 6-3/4" Speaker Adapter Plate
- For 1998-2013 Harley Davidson Touring vehicles
- Designed and manufactured with precision tolerances
- Gapless fit between the speaker and the kit
- Painted to match factory color
- Factory matched texture style
- High-grade ABS plastic construction
- Color: Black
Works in the following applications
- Harley Davidson (FL models with fairings)
Touring 1998-2013
UPC Code 728120484486
The Enrock EKMR2 Marine Wire Antenna provides excellent radio reception signals to the audio system on your automobile, watercraft vehicles. The flexible wire makes it the perfect hideaway antenna, while the corrosion-resistant rubber exterior confirms that it will stand up to salt and spray. The 40inch long flexible wire will make mounting it a breeze. Knowledgeable boaters realize that even the most expensive radio will perform poorly with a second rate antenna that saves money up front. A quality antenna is the crux of reliable performance in any marine radio. From the largest seagoing ships to the smallest bass boats, Enrock antennas have held up for years under the worst marine conditions, always performing to their maximum design capabilities.
General Features:
- Weather Resistant.
- 40" Braided Cable.
- Full AM/FM reception.
- No drilling required.
- Simple and easy install.
- Superior construction.
- Easy to mount.
- Motorola plug at one end.
- Compatible with a variety of marine stereo devices.
UPC Code 799861388647
This motorcycle amp power kits start with the best quality copper wire available for maximum current delivery and strict adherence to American Wire Gauge standards. Add to that our use of pure oxygen free copper flux-tinned conductors and braided sleeving that deliver excellent corrosion resistance and installation reliability and you have the foundation for an exceptional audio power product. These motorcycle power amp kits are topped off with a unique waterproof mini-ANL fuse block design with machined brass inserts that affords convenient access along with installation security.
*The amp power kits come complete with all the cabling, speaker wires, terminals, disconnects, and fuse blocks needed to perform a quality installation, except for RCA interconnects. Since we offer various levels of high performance RCA interconnects for aftermarket radios and high-level input for OEM upgrades, we leave it up to the consumer/dealer to make the RCA choice.
- 6-ft - 10-gauge power cable.
- 6-ft - 10-gauge ground cable.
- 3-ft - 18-gauge turn-on lead wire.
- 2x 4ft speaker wires.
- In-line waterproof Mini-ANL fuse holder and 30-amp fuse.
UPC Code 033991048645