Marine Receiver, 4 x 8" Speakers, 2 x 10" Speakers, 2 x 10" Subwoofers Bundle
Kicker's compact KMC2 digital media receiver packs a lot of performance into an easy-to-install package. If you're tired of settling for sub-par sound in your small boat or powersports vehicle, this gauge-mount receiver is a great solution. This receiver fits into a standard gauge opening, so it's a great pick when you want a lot of sound, but don't have a lot of space to work with. It's tough, versatile, and IPX6 weather-resistant, so go ahead and jump that wave or splash through that mudhole. Built-in Bluetooth to stream music from your smartphone or other Bluetooth-enabled device.
General Features:
- Weather-Resistant AM/FM Receiver with Bluetooth to play or stream your tunes
- Power Per Channel: 18 Watts RMS / 50 Watts Peak
- Large Sunlight-Readable LCD Screen for easy viewing
- Large Buttons provide easy control, even in rough seas or terrain
- Charging 1.158 Input With Thumb-Drive Playback
- IPX6 Certified to withstand rain or washdowns
- Four-Channel Speaker Output (50x4) for plenty of volume - even with the motor running
- Front And Rear Full-Range RCA Outputs to add plenty of amp power
- Rear USB input, AUX input.
- Fits 3-5/8' Gauge Hole
- Mounting Depth: 2-55/64”
- Mounting Hole Diameter: 3-5/8"
- Outside Diameter: 4-29/64”
- Fuse: 10 Amps
- Works with PXIRCX Wired Remote Control to change your tunes from anywhere
UPC Code 713034078609
Kicker’s 45KM84L 8” marine speakers look and sound awesome, with built-in LED lighting and rugged styling, they’re classy too. The Kicker speakers are built to last for marine duty, but they’re easy on the ears. The sturdy poly woofers and balanced dome titanium tweeters cut through wind, waves and engine roar to produce smooth sound. Intended for life on the water, these powerful 8" speakers include sealed motors, rubber cone surrounds, and locking terminal covers to keep spray away from the core componentry. They'll also stand up to severe sunlight, thanks to special UV treatments on the cones, surrounds, baskets, and grilles. Whether you're on fresh water or salt, these speakers will give you years of unresolved performance.
General Features:
- Four-Ohm Voice Coil
- One-Inch Titanium Tweeter
- UV-Treated Polypropylene Woofer With Santoprene® Surround
- UV-Resistant Polymer Basket
- Locking/Sealed Terminal Cover
- Sealed Motor Structure
- 316L Stainless Mounting Hardware Included
- White and Charcoal Grilles With Seven-Color LED System Included*
- Salt/Fog/UV Tested
- 4-Ohm Impedance
- 300W Peak Power Handling
- Multicolor LED Lighting Capability
UPC Code 713034085119
This KXM 8-Channel amplifier gives you the flexibility is the name of the game, and with eight powerful channels to play with, your boat will be the winner! The KXM 800-watt eight-channel amplifier is one of the most flexible marine power plants available today. Using powerful Class D technology, this KickEQ+™ delivers as much as an 18dB of extra bump with a simple turn of the knob. A powerful 24dB crossover is also included, letting you quickly tune your system to perfection.
General Features:
- Class D Power Plant
- Gain Control With "Optimal Input" Indicator
- FIT2™ (Fail-Safe Integration Technology) Circuitry
- Variable 24dB Crossover
- DSP-Controlled Preamp
- KickEQ+™ 18dB Variable Bass Boost
- ABYC/NMMA Compliant Power Terminals
- Conformal-Coated Circuit Boards
- Easy Access to Settings behind Gasket-Sealed Cover Panel
- Black Anodized Aluminum Chassis
- Top-Mounted Teal LED Light Pipe
- Stainless Steel Mounting Hardware Included
UPC Code 713034079910
This Kicker KMTC11 HLCD tower system is made for incredibly smooth sound up close or at a distance - without harsh horn “glare.” Play them loud. Play them all day. These powerful horn-loaded speakers are the new standard for marine sound quality. This KMTC Tower Speaker System deliver great looks, total adjustability and incredible sound quality. Your tunes are loud and clear, whether you’re in the boat, at Party Cove or the end of a tow rope. Want to aim your sound? Easily rotate the speakers a full 359° without tools, then watch the LED’s light up the night in any one of seven colors. Don’t just be the life of the party. Be the reason for it. These 11-inch, horn-loaded tower systems use a proprietary Tractrix® compression horn design, custom made to sound incredibly loud and smooth. All of the HLCD speakers meet or exceed ASTM standards for humidity and UV exposure and come with mounting hardware forged from rustproof, 316L stainless-steel.
General Features:
- Four-Ohm Voice Coil
- Tractrix® High-Frequency Horn Design
- Titanium-Dome Compression Drivers
- Adjustable 12dB Crossover
- Stitched Polypropylene Cone w/ Santoprene Surround
- UV-Resistant Polymer Basket
- 359° Swivel With Toolless Locking Cam/Toggle System
- Stainless Steel/ABS Clamp Fits 1.5 - 3.25-Inch Tubing
- Through-Clamp Wiring System With Mating Socket
- Single Bolt Speaker Removal System
- 316L Stainless Mounting Hardware Included
- Seven Color LED Grilles Included*
- UV/Salt/Fog Tested
UPC Code 713034080121
The Kicker KXMA1200.2 Class D amplifier deliver as much as 1,200 watts – while requiring an incredibly small footprint. No matter where you mount your KXM amp, this easily accessible 24dB crossover lets you quickly tune your system to perfection. To get the most out of your bass, a variable 24dB subsonic filter is featured on mono and five-channel amps. The SHOCwave™ Bass Restoration processor reveals the depth and power hidden in your digital recordings. This advanced processor is built into mono and five-channel KXM amplifiers, and easily controlled with the wireless KXARC remote (included). All power terminals meet stringent ABYC/NMMA standards, while thick gasketing protects the control cover from unwanted moisture. Even the aluminum chassis is UV treated for extra-long life. This amplifier utilizes conformal coated circuit boards to protect the heart of the amp from water damage. An adjustable 24dB crossover is featured on our marine amplifiers, as does 18dB of KickEQ+™ bass boost for that extra bump.
General Features:
- Class D Power Plant
- Gain Control With "Optimal Input" Indicator
- FIT2™ (Fail-Safe Integration Technology) Circuitry
- Variable 24dB Crossover
- DSP-Controlled Preamp
- KickEQ+™ 18dB Variable Bass Boost
- ABYC/NMMA Compliant Power Terminals
- Conformal-Coated Circuit Boards
- Easy Access to Settings behind Gasket-Sealed Cover Panel
- Black Anodized Aluminum Chassis
- Top-Mounted Teal LED Light Pipe
- Stainless Steel Mounting Hardware Included
UPC Code 713034079873
Don't be a square! Kick up your car audio with the power of the Kicker L7S Solo-Baric 10-Inch 1200-Watt 4-Ohm Square Subwoofer. This mighty subwoofer's square design isn't just unique, it translates into more cone area, air displacement, and overall volume. This sub features 600 watts of RMS power, a dual 4-ohm voice coil, a sensitivity of 86.8 dB and frequency response of 24-100 Hz. Meanwhile it also boasts an injection-molded polypropylene cone, patented corner ribs to minimize distortion, and 360-degree SoloKon back bracing. With a mounting depth of 6.25 inches and a mounting cutout dimension of 9.32 inches, all you need is an enclosure and you'll be one step closer to audio perfection.
General Features:
- Dual Four-Ohm Voice Coils
- Injection-Molded Polypropylene Cone
- Patented Corner Ribs Minimize Distortion
- SoloKon™ 360-Degree Back Bracing
- Ribbed Santoprene Surround With Blue Surround Stitching
- UniPlate Back Plate And Pole Piece
- Plus Perimeter Venting For Excellent Thermal Management
- Thick Tinsel Leads
- Large Ceramic Magnet
- Cast Aluminum Basket
- Satin-Nickel Plated, Spring-Loaded Speaker Terminals
UPC Code 713034081203
The Kicker KXMA1200.1 Class D amplifier deliver as much as 1,200 watts – while requiring an incredibly small footprint. No matter where you mount your KXM amp, this easily accessible 24dB crossover lets you quickly tune your system to perfection. To get the most out of your bass, a variable 24dB subsonic filter is featured on mono and five-channel amps. The SHOCwave™ Bass Restoration processor reveals the depth and power hidden in your digital recordings. This advanced processor is built into mono and five-channel KXM amplifiers, and easily controlled with the wireless KXARC remote (included). All power terminals meet stringent ABYC/NMMA standards, while thick gasketing protects the control cover from unwanted moisture. Even the aluminum chassis is UV treated for extra-long life. This amplifier utilizes conformal coated circuit boards to protect the heart of the amp from water damage. An adjustable 24dB crossover is featured on our marine amplifiers, as does 18dB of KickEQ+™ bass boost for that extra bump.
General Features:
- Class D Power Plant
- One-Ohm Stable
- SHOCwave™ Bass Restoration Processor
- KXARC Wireless Remote Included
- Gain Control With "Optimal Input" Indicator
- Variable 24dB Subsonic Filter
- FIT2™ (Fail-Safe Integration Technology) Circuitry
- Variable 24dB Crossover
- DSP-Controlled Preamp
- KickEQ+™ 18dB Variable Bass Boost
- ABYC/NMMA Compliant Power Terminals
- Conformal-Coated Circuit Boards
- Easy Access to Settings behind Gasket-Sealed Cover Panel
- Black Anodized Aluminum Chassis
- Top-Mounted Teal LED Light Pipe
- Stainless Steel Mounting Hardware Included
UPC Code 713034079866
This controller provides multi-function control of LED lighting in KICKER Marine Coaxials and Subwoofers for a customized look. The ultra-slim remote manages 20 different bright colors for those who like a frequent change. The 19 dynamic modes, including adjustable brightness, fade, speed/strobe and auto save, give the user the ultimate control over their boating aesthetics.
General Features:
- Marine LED Remote Controller
- Provides ultimate control over lights
- Ultra slim remote design
- Multi-function control of LED lighting
- Manages 20 bright colors
- 19 dynamic modes including adjustable brightness, fade, speed/strobe and auto save
- Compatible with Kicker marine coaxial speakers and subwoofers
UPC Code 713034070238
Enrock's 16-Gauge Speaker Wire is a smart solution to your audio needs since most speakers do not include speaker wires.This wire comes in 50' Feet to give you convenient installation and pure sound quality enhancement. The cable is tinned and oxygen free copper (OFC) to deliver high-quality sound without any transmission loss. Marine grade speaker wiring made simple. Just use high quality marine duplex wiring with it's fine stranded tin plated copper to resist corrosion.
The added benefit of an overall jacket for added protection.
Don't settle for untinned speaker wire where the copper will turn black!
Get long lasting performance from a quality made cable that is designed to last.
General Specifications:
- Connects audio speakers to your A/V receiver or amplifier.
- Marine grade tinned wire
- Oxygen Free Copper (OFC)
- Features a plastic jacket around the speaker wire
- The white line one one side to mark polarity
- Wrapped around a hard plastic spool
- Length: 50 Feet.
- Gauge: 16.
UPC Code 728120479901
The Enrock 20B AM/FM Antenna includes a flexible mast for durability, along with a 180 swivel base for increased mounting options. It is corrosion resistant and includes 45 inch cable. Flexible mast. Angled mounting options allow you to install the 20B antenna in the most convenient locations. Corrosion resistant for the marine environment.
General Features:
- Marine AM/FM antenna
- Flexible Mast AM/FM Marine Antenna
- 180 degrees Swivel base for maximum mobility and 45 inch cable
- Designed for marine use only
- Angled mounting options allow installation of the antenna in the most convenient locations
- Corrosion resistant for the marine environment
UPC Code 799861390343
New EnrockMarine Universal USB/3.5mm Auxiliary Interface Mount & Cable. It measures 3 meters in length, and will convert your AUX inputs to USB, and is UV resistant.
General Features:
- UV-resistant
- USB to RCA 10" pass-through extension cable
- 1.5" through-hole mount
- Dustproof water-resistant rubber cover
- Use with any radio with rear USB/RCA inputs
- Cable Length: 3m
UPC Code 799861390145
This grille, equipped with multi-color LED accent lighting that can be changed to fit your mood, protects and lights your Square Solo-Baric L7 woofers.
- General Features:
- Size: 10 inch (25cm) Square.
- Accent Leds.
- Multi Colors: Seven different LED colors options available.
- Durable ABS plastic grille
- Weatherproof Construction: ASTM-certified for Salt/Fog and UV exposure.
- Brass inserts at screw locations for a solid connection to the subwoofer.
- Grille Color: White
- Optional LED Light Controller (Kicker 41KMLC)
- Remote can control as many as 20 color changes wirelessly.
- Also controls brightness, adds strobe effect and randomizes colors.
- Compatible with 12" Solo-Baric L7 Subwoofer 2011 Series (11S12L7)
UPC Code 713034075899