AudioControl LC2i Compact 2-Channel 400 Watt Line Out Converter Bundle Combo with Dash Remote (20 Foot Cable, Mounting Enclosure)

The LC2i, is a compact, two-channel processor with active input circuitry, which allows it to accept speaker-level signals of up to 400 watts per channel from factory-installed source units or amplifiers.  It converts them to high-quality pre-amp signals that can then be directed to after-market processors and/or amplifiers. Users can enjoy maximum sound quality while maintaining the use of factory volume and steering wheel controls.

General Features:

• Two channels of Active speaker level inputs – Accept 400 watt signals per channel
• Fixed and variable outputs with discrete level controls
• AccuBASS processing for correction of bass roll-off
• GTOTM Signal Sensing
• Input For Optional Remote Level Control
• Compact design
• Speaker Level Input: 1 (2 channels)
• Maximum Speaker Level Input: 400W per channel at 4Ω
• Input Impedance: 20kΩ
• Preamp Outputs: 2 (2 channels main, 2 channels bass)
• Maximum Output Level: 9.5Vrms/13V peak
• Output Impedance: 150Ω
• Total Harmonic Distortion: 0.01%
• Signal to Noise: >110 dB
• Frequency Response: 33 Hz – 100 kHz ±1 dB
• Remote In
• 12VDC Remote Out (always active when unit is on)
• Current Draw: 150mA
• Recommended Fuse Rating: 1A
• Dimensions: 5.4″L x 3.25″D x 1.5″H (6.5″L including mounting brackets)
• Weight: 1.0lbs (0.5kg)

Add remote level control for your AudioControl processor or amplifier. This is the replacement remote for the Epicenter. Comes with a 20 foot cable and removable mounting enclosure (for custom dash installations).

Compatible With:

• 6XS
• ACM-1.300
• The Epicenter Concert Series
• LC2i
• LC6i
• LC7i
• Overdrive Plus
• Matrix Plus
• LC-4.800
• LC-6.1200

Legacy Products Supported:

• LC6
• LC8
• Original Epicenter (bypass not supported)

Weights & Dimensions:

• Dimensions: 1.75”W x 2.5”D x 1.0”H
• Weight: 2.3oz (65.2g)