JBL BassProSL2 8" Underseat Car Subwoofer, 2x 6.5" Component Speaker, Wiring Kit
The BassPro SL2 self-powered subwoofer fits under the front seat of many vehicles, and adds deep full rich bass to your existing audio system. Its shallow-profile, 8" woofer is coupled with a custom tuned enclosure and is driven by a powerful Class D digital amplifier which making it a powerful solution. A fully variable crossover and Bass EQ are on-board to tune the BassPro SL2 to your system.
General Features:
- Proprietary, shallow-profile woofer
- Efficient Class D amplifier
- Intelligent electronic design
- Crossover control
- Flexible EQ adjustments
- Line- and high-level inputs
- Wired, remote level control capability
- Woofer: 8" (200mm)
- Amplifier Power: 125W RMS
- Frequency Response: 35Hz – 120Hz
- Fuse: 15A
- Maximum Current Draw: 12A
- Quiescent Current Draw: <800mA
- Input Sensitivity: 0.05V – 2V Line-Level Input; 0.5V – 20V High-Level Input
- Crossover Frequency: 50Hz – 120Hz
- Crossover Slope: 12dB/octave
- Bass Boost: 0dB to +9dB @ 70Hz
UPC Code 050036365284
These Infinity Kappa Series component speakers are designed to bring a new standard of excellence in car audio to virtually any vehicle. Kappa’s Plus One fiberglass woofers deliver high-output, deep and robust bass. The high-resolution 3/4" edge-driven textile dome tweeters deliver soaring highs up to 40kHz. Midranges are available to upgrade two-way component systems into three-way.
General Features:
- Power Handling: 110Wrms, 330W peak
- Sensitivity (@ 2.83V): 93dB
- Frequency Response: 45Hz – 40kHz
- Impedance: 3.0 ohms
- Gross weight: 2.9kg
- 40kHz High-resolution Silk Dome Tweeter
- Patented Plus One Glass Fiber Woofers
- 0dB or -3dB Tweeter Output Level Control
- 3-way Upgradability
- Super Compact Design and High Sensitivity 3" Midrange Speaker
- Sleek and Powerful Industry Design
- Slim and Smart Crossover Design
In The Box:
- 2x Speakers
- 2x Plastic multi-hole adapter rings
- 2x Foam gaskets
- 2x Crossovers
- 2x Tweeters
- 2x Threaded flush-mount adapters
- 2x Plastics locking nuts
- 2x Surface-mount cups
- 2x Starfish tweeter mounts
- 30x Screws
- 16x Speed clips
- 1x Allen head bit (2.5mm)
- 2x Infinity logo badges
- 2x Brand stickers
- Owner’s manual
DO NOT USE DRILLS ON THE SCREW SPEAKER TERMINALS EVER.
Loosen and Tighten BY HAND ONLY. Using a Drill snaps the solder connection on the back of the terminal and the X-over (coax) Circuit board.
UPC Code 050667376949
The Enrock 8-Gauge Amplifier Installation Kit makes installing your brand new sound system in your car or truck much easier. It includes all of the cables, wires, tubing, ties, grommets and ring terminals that you will need in order to get your new sound system up and running.
The car amp install kit works with a wide range of sound systems and car types and it makes the installation process much simpler by conveniently adding all your supplies to one single kit.
Kit Includes:
- 20 ft. 8 GA Red Power Cable.
- Competition High Quality Fuse Holder.
- 1/4" Ring Terminal.
- 3 ft. 8 GA Black Ground Cable #10 Ring Terminal.
- 16 ft. 18 GA Blue Turn-On Wire.
- 20 ft. High Performance RCA (TRCA) Interconnect (3) Rubber Grommets.
- 30 ft. Speaker Wire 5/16" Ring Terminal.
- 6 ft. Split Loom Tubing (20) 4" Wire Ties.
UPC Code 728120451105
