JBL BassPro SL2 8" Underseat Subwoofer, 2x 6x9" Component Speakers, Wiring Kit
The BassPro SL2 self-powered subwoofer fits under the front seat of many vehicles, and adds deep full rich bass to your existing audio system. Its shallow-profile, 8" woofer is coupled with a custom tuned enclosure and is driven by a powerful Class D digital amplifier which making it a powerful solution. A fully variable crossover and Bass EQ are on-board to tune the BassPro SL2 to your system.
General Features:
- Proprietary, shallow-profile woofer
- Efficient Class D amplifier
- Intelligent electronic design
- Crossover control
- Flexible EQ adjustments
- Line- and high-level inputs
- Wired, remote level control capability
- Woofer: 8" (200mm)
- Amplifier Power: 125W RMS
- Frequency Response: 35Hz – 120Hz
- Fuse: 15A
- Maximum Current Draw: 12A
- Quiescent Current Draw: <800mA
- Input Sensitivity: 0.05V – 2V Line-Level Input; 0.5V – 20V High-Level Input
- Crossover Frequency: 50Hz – 120Hz
- Crossover Slope: 12dB/octave
- Bass Boost: 0dB to +9dB @ 70Hz
UPC Code 050036365284
These Infinity Kappa speakers set a new standard in car audio. Our Patented Plus One woofers deliver tight robust bass and high-output that is detailed and musical. Edge-driven textile dome tweeters with oversized voice coils deliver silky smooth highs with increased thermal power handling for high volume enthusiasts. An optional midrange speaker with bandpass crossover is available to upgrade the two-way component systems into three-way systems for increased performance where a three way system is desired or fits into factory locations. Every model is voiced using audiophile grade inductors and capacitors resulting in detail and accuracy unmatched by other brands in their class. And Kappa's 2 ohm design extracts every watt of power from the amplifier or head unit for exceptional performance. Kappa is how all car speakers should perform.
General Features:
- Power Handling: 135W RMS, 405W peak
- Sensitivity (@ 2.83V): 94dB
- Frequency Response: 35Hz – 35kHz
- Voice Coil Diameter: 1-7/16 in. (35mm)
- Impedance: 2.5 ohms
- Patented Plus One Glass Fiber Woofers
- Edge-driven textile dome tweeters
- UniPivot Tweeter
- 3-way Upgradability
- SLI(Super Low Impedance) High Output design
- Harman Standard Reliability Testing
- Completely Tuned
UPC Code 050667373238
The Enrock 8-Gauge Amplifier Installation Kit makes installing your brand new sound system in your car or truck much easier. It includes all of the cables, wires, tubing, ties, grommets and ring terminals that you will need in order to get your new sound system up and running.
The car amp install kit works with a wide range of sound systems and car types and it makes the installation process much simpler by conveniently adding all your supplies to one single kit.
Kit Includes:
- 20 ft. 8 GA Red Power Cable.
- Competition High Quality Fuse Holder.
- 1/4" Ring Terminal.
- 3 ft. 8 GA Black Ground Cable #10 Ring Terminal.
- 16 ft. 18 GA Blue Turn-On Wire.
- 20 ft. High Performance RCA (TRCA) Interconnect (3) Rubber Grommets.
- 30 ft. Speaker Wire 5/16" Ring Terminal.
- 6 ft. Split Loom Tubing (20) 4" Wire Ties.
UPC Code 728120451105
