JBL Stage 1200D Dual 12" 1200W Ported Enclosure Subwoofers, Mono Amp, Wiring Kit
The JBL Stage 1200D dual subwoofer system will give you the boost you need so your sound can attain that robust character you've been looking for! Pushing out 1200 watts of peak power, this subwoofer is an absolute powerhouse packed into an affordable construction. The black carpet enclosure protects the woofers and ensures reliable service over prolonged use.
General Features:
- Black Carpet Ported Enclosure
- 2x Stage 122AM 12" Subwoofers
- Polypropylene Cone
- Rubber Surround
- Enclosure made from 5/8" MDF covered with black carpet
- 2-Ohm Impedance
- Power Handling: 600 watts RMS
- Power Handling: 1200 watts Peak
- Frequency Response: 34-200 Hz
- Sensitivity: 94 dB
UPC Code 050036381567
This JBL Stadium mono amplifier delivers the efficiency and power you expect from Class D amplifiers – and the performance you expect from JBL. The comprehensive all new E.A.R.L terminal and power adapter enables easy installation and optimized performance. The remote bass control allows the user to increase and decrease bass output independent of head unit tone controls. The industrial design not only provides an elegant look, but also enhances power dissipation to ensure long term reliability. Stadium amplifiers give you power to shape your car audio experience in new ways.
General Features:
- High-performance, mono Class D subwoofer amplifier
- Low Distortion
- Full On-Board Protection
- Proprietary High-Conductivity Terminals
- Compact footprint
- Sleek design
- Remote Bass Control
- Operating voltage 9-16 volts
- RMS power @ 4 ohms: 380W
- RMS power @ 2 ohms: 600W
- Total peak power: 1500W
- Frequency response: 10Hz – 320Hz @ -3dB
- Crossover filter: LPF 32Hz – 320Hz, Variable 12dB/Oct
- Bass EQ: 70Hz Fix 0-9dB
- THD + N at rated power: ≤0.1%
- High input maximum signal level: 20V
- High input maximum sensitivity: 2V
- Line input maximum signal level: 2V
- Line input maximum sensitivity: 0.2V
- Line-in signal-to-noise ratio (reference to 1 watt): ≥80dB
- Quiescent current draw: ≤1.7A
- Fuse size: 2 x 35A
In the Box
- 1x Amplifier
- 2x Differential Speaker-Level Adapter
- 2x Spare Fuses
- 4x Philip Screws
- 1x Remote Bass Control & Cable
- 1x E.A.R.L Terminal
- 3x Self-Tapping Screws
- 1x Owner’s Manual
UPC Code 050036356121
The Enrock 8-Gauge Amplifier Installation Kit makes installing your brand new sound system in your car or truck much easier. It includes all of the cables, wires, tubing, ties, grommets and ring terminals that you will need in order to get your new sound system up and running.
The car amp install kit works with a wide range of sound systems and car types and it makes the installation process much simpler by conveniently adding all your supplies to one single kit.
Kit Includes:
- 20 ft. 8 GA Red Power Cable.
- Competition High Quality Fuse Holder.
- 1/4" Ring Terminal.
- 3 ft. 8 GA Black Ground Cable #10 Ring Terminal.
- 16 ft. 18 GA Blue Turn-On Wire.
- 20 ft. High Performance RCA (TRCA) Interconnect (3) Rubber Grommets.
- 30 ft. Speaker Wire 5/16" Ring Terminal.
- 6 ft. Split Loom Tubing (20) 4" Wire Ties.
UPC Code 728120451105
