Network Cable Tester for Testing UTP, STP, BNC Coaxial, Telephone Continuity, Short Circuit, Open Connection, Length Test & Test Leads Included
The PHCT70 Network Cable Tester is a powerful tool for testing everything from Cat 5, 5e, 6 Network/Telephone to BNC coaxial and other cabling. You'll be able to test installed cabling for short circuits, open circuits, continuity, wiring pattern, and cable length. This device makes it possible to test any number of cables all by yourself. You can even measure cable length and recognize pairs without the Far-end Port. You’ll have the option of calibrating the length tester so that you know you are getting the right measurements. With WIREMAP, save time and money by knowing you got it right the first time.
Test Both Unshielded (UTP) and STP Cables Via RJ45 Port Test RJ11, Telephone lines (TEL) And Coaxial Cable (BNC) Via Special Adaptors Detect Open Circuits, Short-Circuits, Cross-Talk Interference, And Mismatched Wiring In Any Variety Of Cables Determine The Length Of Each Individual Strand In Pair & Length Mode with 97% Accuracy LCD Display Gives Clear Results While Showing How Each Wire Matches Up For Portable Use W/ Long Battery Life (Up To 50 Hours) Locate Up To 8 Far-End Passive Ports Far-End Port with Voice Prompt Measure Length And Recognize Pairs Without The Far-End Port Single Chip Microprocessor Watchdog Software Ensures Reliable Operation Low Voltage Battery Alarm And Indicator Automatic Time-Delay Shutoff (30 Minutes Of Idle Use) Maximum Cable Length: Twisted Cable 31,200 ft Length Calibration: Calibration Accuracy: 3% (±1.5 ft)(Calibrating Cable > 5M) Shipment Accuracy: 5% (±1.5 ft)(AMP, AT&T Class 5 Cable) Display: Meters Or Feet Tester Ports: Main RJ45 Master port (M), Loop-Back RJ45 Port (L), And Far-End Port Included: BNC And RJ11 Converters For Measuring & Checking Continuity Of Coaxial & Telephone Cabling Working Ambient Temperature: -10° C ~ +60° C Requires 4 x AA 1.5V Batteries