DB652 2-way speakers feature a 6-1/2" polypropylene woofer cone with a strong rubber surround for solid playback and resilience under the environmental stress that comes with living in your car doors. A 3/4" silk dome tweeter delivers smooth highs with precision to give you a vibrant soundstage, while a built-in crossover keeps the highs and lows flowing to the proper drivers.With power handling up to 100 watts RMS, you'll do fine driving this system with an aftermarket receiver, but these speakers will reach peak performance if you power them with a nice amp.
Everything you love about Polk's Dynamic Balance technology -that rich,
clean, full-range sound-is built into the marine-tough, yet ruggedly
sophisticated, DB+ series. And with its universal fit, it can be
installed in any vehicle: Automobiles, motorcycles, boats, ATVs-you name
it. Upgrade from your OEM speaker system toward a bigger, fuller,
high-performance sound. The high-grade materials used in our DB+ Series
ensure you get an audio system that's designed and engineered for clear,
full range sound that will last much longer than your factory setup.
These speakers also feature non-resonant materials so you get extremely
clear highs, mids, and lows no matter what you're listening to through
our patented Dynamic Balance (DB) Technology. The new DB+ series has
been updated so you can enjoy a simple drop in installation in any
vehicle including cars, boats, ATV's -- you name it. Its new shallow
tweeter design ensures your factory speaker grille re-installs with ease
for a flush, seamless look. This quick and easy experience also ensures
a faster installation process so you can get back to what matters with
our great sound always along for the ride. The DB+ Series is IP65 rated
so it's dirt and water- resistant. It also has been tested for salt-fog,
UV and humidity. A big part of that marine certification also means
that each speaker has a non-corrosive plastic grille, a polypropylene UV
tolerant cone, waterproof inner and outer surrounds, and stainless
steel mounting hardware, ensuring that it's fully protected against the
elements.
SPEAKERS
2-way car speakers (pair)
marine certified — recommended for fresh water and powersports applications
6-1/2" polypropylene woofer cone with rubber surround
3/4" silk dome tweeter
handles up to 100 watts RMS (300 watts peak power)
frequency range: 40-22,000 Hz
sensitivity: 92 dB
top-mount depth: 1-13/16"
grilles included
includes adapter rings for 6-3/4" openings
UPC Code 747192127268
Polk 2 Channel Amplifier 300 Watts Max Bass Boost Switch Speaker level input connects 2 ohm stable stereo operation is capable of driving virtually all automotive speakers. High-speed MOSFET switching power supply and high current bipolar output transistors Double layer fiberglass epoxy printed circuit boards for more rigidity, less shrinkage and a smaller overall amp footprint. 6-way Smart System Protection (SSP) circuits Selectable 12 dB/octave high or low-pass crossover with fixed crossover frequency. Switchable 3-position bass boost (0dB, 6dB, 12dB) for extra bass thump. Variable input gain optimizes match with different signal sources (175mv to 8V). RCA outputs for easy daisy chaining of other amplifiers. Mounting hardware with rubber isolation grommets and extra fuse included.
AMPLIFIER
Speaker level input connects 2 ohm stable stereo operation is capable of driving virtually all automotive speakers.
High-speed MOSFET switching power supply and high current bipolar output transistors
Double layer fiberglass epoxy printed circuit boards
6-way Smart System Protection (SSP) circuits
Selectable 12 dB/octave high or low-pass crossover with fixed crossover frequency.
Switchable 3-position bass boost (0dB, 6dB, 12dB) for extra bass thump.
Variable input gain optimizes match with different signal sources (175mv to 8V).
RCA outputs for easy daisy chaining of other amplifiers.
Mounting hardware with rubber isolation grommets and extra fuse included.
Multi-color status LED gives instant information on amplifier operation.
UPC Code 747192120702
The Enrock 8-Gauge Amplifier Installation Kit makes installing your brand new sound system in your car or truck much easier. It includes all of the cables, wires, tubing, ties, grommets and ring terminals that you will need in order to get your new sound system up and running.
The car amp install kit works with a wide range of sound systems and car types and it makes the installation process much simpler by conveniently adding all your supplies to one single kit.
Kit Includes:
- 20 ft. 8 GA Red Power Cable.
- Competition High Quality Fuse Holder.
- 1/4" Ring Terminal.
- 3 ft. 8 GA Black Ground Cable #10 Ring Terminal.
- 16 ft. 18 GA Blue Turn-On Wire.
- 20 ft. High Performance RCA (TRCA) Interconnect (3) Rubber Grommets.
- 30 ft. Speaker Wire 5/16" Ring Terminal.
- 6 ft. Split Loom Tubing (20) 4" Wire Ties.
UPC Code 728120451105