JBL PRV175 Receiver, Remote, (4) 6.5" LED Speakers, Amp, Asscessories
New JBL PRV 175 AM/FM/USB/Bluetooth® Gauge Style Marine Boat Yacht Stereo Radio Player All-Environment Multimedia Stereo Receiver JBL's PRV 175 marine digital media receiver will change the way you listen to music on your boat - without forcing you to cut or change your boat.
This digital media receiver packs a lot of features into a compact design that fits into a standard tachometer opening. You'll enjoy AM/FM radio, of course, plus built-in Bluetooth® that lets you stream music from your Android phone. You can also use the rear aux input for your music player, or plug a thumb drive into the rear USB port to enjoy your favorite music files.
The PRV 175 includes a set of rear-mounted preamp outputs, so you can expand your system with a marine amp in the future. The LED display tells you what you're listening to with just a glance, while the watertight, UV-stable face and controls will stand up to sun, salt and moisture when you're riding the waves.
In addition to features identified in the bullet points, this has a 2-band parametric equalizer and 24-bit Digital Analog Converter (DAC) to enhance your MP3/WMA
- marine digital media receiver (does not play CDs)
- built-in Bluetooth® for music streaming
- built-in amp (20 watts x 4 RMS/45 peak x 4 channels)
- marine-rated watertight face
- fits into a standard tachometer opening
- inputs: rear USB input, rear aux input
- outputs: 2-channel preamp outputs
- required cutout: 3-3/8" (diameter) x 3-5/16" (depth)
UPC Code 648701217503
This Milennia REM70 wired remote works with select marine receivers. This remote features a backlit silicone rubber membranes, 2-line display matches radio, adjust bass, treble, fader and balance by using button. "W x 2-1/4"H x 3/4"D
General Features:
- Weatherproof
- Backlit silicone rubber membranes
- 2-line display matches radio
- Can adjust bass, treble, fader and balance by using the select button
- Sealed tack switches
- Display remote for PRV-250, PRV-350, PRV-175, MBB-2020, MBB-2120, MR-180
UPC Code
These Infinity's Kappa Marine loudspeakers leverage Infinity’s world class audio engineering and music reproduction with purpose-built marine loudspeakers that will survive the rigors of the harsh marine environment. These 6-1/2" coaxials feature Plus One polypropylene woofer and midrange cones, Mylar tweeter domes, one piece cast polymer baskets, sealed magnets, and rubber woofer surrounds for high SPL performance. These speakers are UV resistant in a marine grade IPX3(IPX5 from front) weather resistant and include RGB perimeter illumination and go through 300 hours of salt spray testing.
General Features:
- Power Handling: 100 watts RMS, 300 watts peak power
- Sensitivity: 92dB at 2.83 volts
- Frequency Response: 40 - 25kHz
- Voice Coil Diameter: 1 in. (25.5mm)
- Impedance: 3 ohm impedance
- Plus One Woofer Cones
- Perimeter RGB Illumination
- One Piece Polymer Basket
- Mylar Tweeters
- Harman Standard Reliability Testing
- Product Bulk Packaging
DO NOT USE DRILLS ON THE SCREW SPEAKER TERMINALS EVER.
Loosen and Tighten BY HAND ONLY. Using a Drill snaps the solder connection on the back of the terminal and the X-over (coax) Circuit board.
UPC Code
New Infinity Reference amplifiers deliver pure power from a slim, compact chassis that’s designed to fit in more vehicles. Available in 4-channel, 5-channel, and mono models, Reference amps incorporate our latest amplifier topology, include variable electronic crossovers and bass boost control for precise system tuning, and feature high- and low-level inputs for easy interface with virtually any system. They’re also compatible with several new vehicle technologies, including many advanced driver assistance systems, and Harman HALOsonic, a suite of acoustic solutions that can simulate engine sounds for a better driving experience in hybrids and electric cars, cancel road noise for better-sounding music, and more.
General Features:
- Signal-to-Noise Ratio - ≥85dB (ref 1W output @ 4Ω)
- Max Power - 1000W Peak
- Power Output, 2Ω - 100W RMS x 4, <1.0% THD+N
- Power Output, 4Ω - 70W RMS x 4, <1.0% THD+N
- Power Output, 4Ω Bridged - 200W RMS x 2, <1.0% THD+N
- Compact footprint
- High- and low-level inputs
- Variable crossovers and bass boost
- ADAS input with channel assignment
- HALOsonic mixing input
UPC Code 050667372729
The Universal USB/3.5mm Auxiliary Interface Mount and Cable measures 10 feet in length and will convert your AUX inputs to USB, and is UV resistant.
General Features:
- UV-resistant
- USB to RCA 10" pass-through extension cable
- 1.5" through-hole mount
- Dustproof water-resistant rubber cover
- Use with any radio with rear USB/RCA inputs
- Cable Length: 3m (10ft)
UPC Code 799861390145
This rugged Enrock EKMR1 marine soft wire universal antenna gives you performance, durability and plenty of placement options. The flexible wire makes it the perfect hideaway antenna, while the corrosion-resistant rubber exterior confirms that it will stand up to salt and spray. The 22inch long flexible wire will make mounting it a breeze.
UPC Code 799861388630
A ground-breaking virgin-PVC, Hyper-Flex insulation and multi-strand construction allows you to bend, twist, and contort the cable in any way imaginable for an ultimate installation experience while delivering maximum current flow; remains ultra-flexible under hot or cold temperature extremes; transfers the cleanest audio signal possible by using tightly twisted, silver-tinned OFC copper conductors; zip line to easily remove outer insulation.
- Hyper-Flex rope-lay speaker cables
- Silver-tinned OFC (oxygen-free copper) construction
- Superior bass response and signal clarity
- Hyper-Flex lay flat insulation virtually disappears under carpets
- Gauge: 16
- 20 Ft Long
UPC Code
