2x JBL Club 10 10" 900 Watt Max Power High-Performance RGB LED Marine Audio Subwoofer with Grilles, 600W Max Compact Waterproof Digital Boat Mono Amplifier, 8 Gauge Amplifier Wiring Kit

$924.99
$577.99
(You save $347.00 )
SKU:
R-2-JBLMARSUBCB102AM-KSDR2001D-AK8-10
UPC:
027581906217
Condition:
New
Weight:
37.85 LBS
Minimum Purchase:
1 unit
Shipping:
Calculated at Checkout

2x JBL Club 10 10" 900W High-Performance LED Marine Subwoofer, Compact Mono Amp

JBL Club 10 10" 900 Watt Peak Power High-Performance Marine Audio Subwoofer with RGB LED Illumination (White and Gray Grilles) (x2)




JBL Club Marine Speakers are ready for your next outdoor adventure. These fully marinized speakers not only deliver JBL sound, they also provide RGB lighting to bring the sound to life. Engineered to withstand sun, salt, sea spray and wash downs, they feature sealed motor structures, UV resistant one-piece cast-polymer baskets, a sealed magnet and rubber surrounds.

The polypropyelene cone and balanced silk dome tweeter provide great bass, smooth highs and lots of output to ensure every note can be heard loud and clear. With two grille colors included in the box, you can easily match your speaker grilles with your boat.


Club Marine 10" Subwoofer

  • Power Handling: 300Wrms, 900W peak
  • Sensitivity (@ 2.83V): 89dB
  • Frequency Response: 25Hz – 500Hz
  • Nominal Impedance: 4ohm
  • 1x Subwoofer
  • 1x Speaker Grilles, Gloss White
  • 1x Speaker Grilles, Satin Grey
  • Stainless steel mounting hardware
  • Drill bit for easy installation
  • Foam gasket
  • 1x Speaker Pigtail Harness
  • 1x RGB Pigtail Harness
  • 2x JBL sticker
  • Quick Start Guide

UPC Code 050036390453
JVC KS-DR2001D 600 Watts Max Power Compact Marine Waterproof Digital Mono Amplifier




This JVC amplifier is the durable and powerful product you need to give your system a much needed boost. This amplifier is certified waterproof, dustproof, rustproof, and vibrationproof. A Drain Tunnel Structure is employed for creating a gap between the amplifier and the installation surface. This prevents saltwater and sand from accumulating on the bottom, increasing corrosion protection. Thicker terminal connection points and increased wire size enables maximum current flow and higher output for better low frequency response and cleaner output, resulting in powerful bass reproduction. Magnetic Shielding for the output coils reduce radiated noise, delivering smooth and accurate sound.


General Features:

  • Compact Mono Digital Amplifier for Car, Marine, UTV and Motorcycle
  • 600W Max Power
  • 300W RMS Power @ 2 ohms
  • Wired Level Control Included
  • Waterproof IPX7/IPX6
  • Dustproof IP6X
  • Rustproof ASTM B117
  • Vibrationproof
  • High-Quality Capacitors
  • Speaker Level Input
  • LPF Frequency Control
  • BassBoost Freq Switch
  • Frequency Response (+0, -3dB): 20Hz - 200Hz
  • Input Sensitivity (+0, -3dB): 0.2V - 5.0V
  • Signal to Noise Ratio: 97dB
  • Low Pass Filter Frequency (-12dB/oct.): 50Hz - 200Hz (variable)
  • Bass Boost Control: 0-+18dB
  • Bass Boost Frequency: 40Hz / 60Hz / 80Hz

UPC Code 046838003554
Metra ML-AK8-10 8 Gauge Amplifier Wiring Marine Kit - 10ft. w/ Circuit Breaker




Power your marine amplifier with a wiring kit that can withstand the harsh environment and still deliver full sound performance. Fully tinned wiring ensures that these amp kits won’t corrode or oxidize and turn green after a season on the water. Oxygen-free copper provides a reliable connection with maximum conductivity. By using 100% virgin copper the tin won’t flake off, something commonly seen when using recycled copper materials. While it is also common to tin just the tips of the wire for cost savings, this practice does not actually provide any benefits. Metra’s amp kits use fully tinned copper wire from top to bottom that can withstand a harsh marine environment and salty air. The ignition-protected 50-amp circuit breaker is IP67 rated with stainless steel connection points for corrosion resistance

Amplifier Wiring Kit:

  • Marine compliant amplifier wiring kit
  • Fully tinned 100% virgin copper wire
  • BC5W2 marine compliant jacket
  • 50-amp marine circuit breaker is rated IP67 with stainless steel connection points for corrosion resistance
  • Easy to solder tinned wiring
  • Connectors, ring terminals, and wire ties included

What’s in the box:

  • (1) 8-gauge tinned oxygen-free copper side-by-side red power and yellow ground wire (10ft.)
  • (1) 18-gauge tinned oxygen-free copper blue remote turn-on wire (18ft.)
  • (2) 8-gauge ring terminal with shrink tube and logo, pre-terminated on each end of the 2ft. red wire
  • (1) 8-gauge ring terminal with shrink tube and logo, pre-terminated on 8ft. red wire
  • (1) 8-gauge ring terminal with shrink tube and logo, pre-terminated on yellow wire
  • (1) Ignition protected circuit breaker (50-amp)

UPC Code 086429416820

1 Year Manufacturer Warranty