4x Kicker KM604WL 6.5" 150W Blue LED Speaker, Amplifier w/Kit, Bluetooth Adapter
Now with blue LED lighting standard, the weather-proof KM60 Coaxial Marine Speaker is purpose-made for great looks and superior sonic quality. ASTM-tested for UV and salt/fog exposure, all KICKER Marine Speakers are designed specifically for boat audio and meets or exceeds the strictest standards in the industry. UV treatments on the coaxials' injection-molded cones, Santoprene surrounds, baskets and grilles help all models maintain in marine environments. These speakers can endure almost any weather conditions with splash-and-spray-resisting sealed motors, cones and locking terminal covers. Speaker hardware is forged from rustproof, 316L stainless-steel. Spectacular highs and midrange sounds coupled with the simplest of speaker installations, provide full-range audio specifically for a marine environment.
General Features:
- Blue LED Lighting Included
- Spectacular Highs And Smooth, Impactful Midrange
- Made Specifically For Marine With Sealed Motor And Polymer Basket
- UV-Treated Polypropylene Woofer With Santoprene® Surround
- Stainless Steel Hardware Included
- White Grill And Basket Will Not Yellow Or Fade
- ASTM Tested For UV And Salt/Fog Exposure
- Woofer(in,mm): 6-1/2, 165
- Tweeter(in,mm): 1/2, 13
- Tweeter Dome Material: PEI
- Rated Impedance(Ω): 4
- Peak Power (watts, per ANSI/CTA-2031-A): 150
- Recommended Amplifier Power (watts RMS): 15-50
- Sensitivity(1W,1m): 90
- Frequency Response(Hz): 35-21k
- Mounting Hole Diameter(in,mm): 5-3/16, 132
- Mounting Depth(in,mm): 2-1/2, 62
- Grilles: White Only
UPC Code 713034027980
Enrock's EEA720.4 4-channel amplifier was designed compact yet rugged. The outdoors can be a tough spot for audio gear so Enrock considered the salt, spray and sunlight when designing this Class D amplifier. With 45 watts RMS per channel this amplifier will drive your speakers no matter the application you are using it for. It’s compact enough for a bike and powerful enough for a car. You’ll have no trouble hearing your tunes over the wind and waves with this powerful amplifier.
Weather Resistant for Marine Application
Durable and Powerful for Automotive Use
Compact and rugged for Off-Road Installation
This compact amplifier will fit into a storage compartment on a boat, motorcycle, ATV, or car with optimal performance, despite its size. Should you decide to add a pair of subwoofers you can bridge this amp to a 2-channel mode and send 120 watts to each subwoofer, or switch to 3-channel mode to get a pair of speakers and a subwoofer. With high-pass and low-pass filters, plus bass boost, you can customize your sound output just the way you take your tunes.
EEA720.4 GENERAL FEATURES:
- 4-channel marine/powersports/ car amplifier
- 45 watts RMS x 4 at 4 ohms (60 watts RMS x 4 at 2 ohms)
- 120 watts x 2 bridged at 4 ohms
- Class D amp technology
- 720 Watts Peak Power
- variable high- and low-pass filters
- Sealed Chassis for use in harsh environments
- Ultra-efficient full range class D operation
- Built-in Crossover- maximum flexibility
- 2 or 4 channel input
- Signal to noise ratio 97db
- High pass filter 120Hz/80Hz
- Input range: 200mV-10V
- Frequency Response: 20Hz to 20KHz
UPC Code 728120454069
The Power Sport Motorcycle Universal Amplifier Wiring Kit includes the following 6 foot length of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder, 60 amp fuse protected by a black nylon braid, Pre-terminated ring terminals, (2) 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh and 4"x6" hook and loop mounting pad for micro-amplifiers.
Amplifier Wiring Kit:
- Designed tor motorcycles
- 6 feet of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder and 60 amp fuse protected by a black nylon braid
- Pre-terminated ring terminals make connections to the battery simple
- Two 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh makes upgrading the factory speaker wires or adding new speakers a smart choice
- Upgrading Harmon Kardon System – Two 47-ohm .5 watt resistors to keep the factory radio outputs active
- All the necessary installation hardware is included along wtth a 4 × 6 inch hook and loop mounting pad for micro-amplifiers to hold the amplifier securely in place
UPC Code 086429332267
Add Bluetooth™ streaming to any stereo with RCA aux in. Just plug this in to the input, add 12 volts and pair your device.
The PROSPEC ELECTRONICS marine accessory is the perfect addition to have on your boat to enjoy your day on the water.
UPC Code 648701500018
