4x Kicker 43DSC6504 6.5" 240W Coaxial Speakers w/Wire Harness, Speaker Baffle
The DSC6504 6-1/2-Inch Coaxial Speakers are the ideal upgrade for your car doors. Using zero protrusion PEI tweeters ensures you get every bit of clarity you need, without interfering with factory grilles. A stamped steel framework supports a ribbed, UV-treated foam surround and rigid polypropylene cone with EVCTM (Extended Voice Coil) technology, for the best sonic quality.
These speakers will handle 60 watts RMS and 240
Watts Max per speaker. They include 1/2" tweeters to really hit those
high notes with stiff polypropylene cones to hit low bass notes as low
at 40 Hz. These speakers are a drop-in coaxial upgrade with the
flexibility to fit nearly any vehicles doors for a vast improvement over
factory sound.
General Features:
- Power Handling: Peak: 240 watts
- Recommended Power Range: 6 - 60 watts RMS per channel.
- Rigid polypropylene cone material.
- Polyester foam speaker surround.
- Stamped steel basket.
- EVC (Extended Voice Coil) technology, for excellent sound.
- 1/2" zero protrusion polyetherimide tweeter.
- Neodymium tweeter magnet.
- PEI (polyether imide) balanced dome tweeter.
- Top-mount Depth: 1-13/16"
- 4 ohms impedance.
- Frequency Response: 40 - 20,000 Hz.
- Sensitivity: 90dB.
- Grilles included.
UPC Code 713034077671
These speaker harness allow you to plug your new speakers into the factory connectors present in your vehicle's speaker openings. The Enrock Speaker harness avoids having to cut your vehicles factory speaker plugs when replacing your existing factory speakers. The Enrock speaker harness contains two female quick slide connectors on one end to attach properly to your new aftermarket speakers and a proprietary Molex connector on the opposite end that connects to your vehicles factory speaker plug.
Two identical speaker harnesses are included. The white wire is positive; black wire is negative.
Speaker Harness for Select GM Vehicles
- GM 88-Up Speaker Harness
- Connects speakers to factory harness
- Can be used to repair a harness where the plugs have been cut or damaged
UPC Code 728120483205
EnrockAudio 16-Gauge Speaker Wire
This 16-gauge speaker wire with spool from EnrockBasics lets you easily connect your speakers to amplifiers or receivers.
Marked Polarity
One side of the wire is marked with a white line, making it quick and easy to distinguish the polarity and get your audio system set up properly.
Easy to Use
The EnrockAudio 16-gauge Speaker Wire comes wrapped around a hard plastic spool that makes dispensing convenient and easy.
Details
Connects audio speakers to your A/V receiver or amplifier no distortion. The plastic jacket around the speaker wire helps to deliver high-quality undistorted signals to and from all of your audio equipment.
General Features:
- 50 Feet of 16-gauge speaker wire.
- Connects audio speakers to your A/V receiver or amplifier.
UPC Code 799861390381
Designed to fit any 6.5" speaker, this adjustable speaker baffle creates a seal around the speaker that protects the speaker and to eliminate any interference for better sound quality.
Speaker Baffle:
- 6.5″ (165mm) speaker fitment
- Silicone based material for perfect air tight seal
- Adjustable rear section to stop rain ingress
- Adjustable baffle
- Rubber baffle with isolator and deadening
UPC Code 840440927259
