2x JBL Stage 1200S 12" 1000 Watt Max Car Subwoofer, Class D Mono Amplifier, Kit
The JBL Stage 1200S subwoofer enclosure pounds out resounding bass from a compact enclosure that fits in just about any vehicle. High efficiency combines with impressive power-handling for rich and satisfying performance. The 12" woofer cone and large voice coil work together for remarkable realism, note-perfect accuracy, and sustained bass response. And this enclosure's striking good looks are matched by its ease of installation.
General Features:
- 12" Sealed Subwoofer in Enclosure
- Power Handling: 250W RMS
- Power Handling: 1000W Peak
- Sensitivity: 91dB
- Frequency Response: 34Hz-200Hz
- Impedance: 2 ohms
UPC Code 050036381604
The CXA800.1 Mono Amplifier is built for affordable power and performance, thanks to optimized circuit layout and high-grade internal components.
This CX-Series Mono Amp is now one-ohm stable, giving you even more power and wiring options for your system! Using a Class-D power plant, the CXA800.1 features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump with a simple turn of the optional CXARC Remote Bass Controller. A powerful 12dB crossover and 24dB subsonic filter is included, letting you quickly tune your system to perfection. Use the full-range outputs to expand your system with other bass amps, or a full-range amp to complete your system.
CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality at the same time!
Expand your system with full-range, RCA pass-through outputs, then choose a “standard” mount or a cool vertical mount with the included hardware.
This CX.1 amplifier delivers as much as 800 watts into one bass channel.
General Features:
- Efficient Class-D amplifier
- Three-second turn-on/off delay to eliminate unwanted interference
- Variable 12dB crossovers provides control to dial in perfect sound
- KickEQ™ 6dB variable bass boost for those additional low frequencies
- 24dB subsonic filter for protection from potentially damaging frequencies
- FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
- Accepts up to 40-volt input signal
- Small footprint for easier installation
- Compatible with CXARC Remote Bass Control
- Vertical mounting hardware included for another unique look
- Power (watts/ch) 4 Ohm: 300x1
- Power (watts/ch) 2 Ohm: 600x1
- Power (watts/ch) 1 Ohm: 800x1
- CXRC Remote Bass Capable (sold sep.): yes
- Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L): 8-1/8, 20.6
- Frequency Response (Hz): 25-200, +0/-1dB
- Input Sensitivity: 250mV-10V (Low Level), 1V-40V (High Level)
- Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power
- Active Crossover: Variable Lo-pass 50Hz–200Hz, 12dB/octave
- Subsonic Filter: 25Hz @24dB/octave
- KickEQ Boost: Variable 0-6dB @40Hz
UPC Code 713034012818
This Kicker 4 Gauge Power Amplifier Wiring Kit includes all the necessary hardware and wire to power one amplifier and is designed specifically for car audio systems up to 1000 watts. The included premium power/ground cable is made from 100% oxygen-free copper and is true-to-gauge for ultimate power transfer. This PK4 power amp kit includes 20-feet of 4 Gauge blue power cable, 3-feet of 4 Gauge black ground cable, 20-feet of 16 Gauge blue remote turn-on wire, Maxi Fuse holder, 50 Amp fuse and more. KICKER® amp power kits feature top-quality Hyper-Flex™ power, ground and turn-on cables. A heavy-duty AFS fuse holder, fuse, terminals and zip ties come in the kit as well. One additional year of amplifier warranty is included if purchased with a KICKER amp.
Kicker PK4 General Features:
- 4 Gauge OFC Power Amplifier Installation Kit
- Designed specifically for car audio systems up to 1000 watts
- Premium power and ground wire provides optimal power transfer
- Made from 100% oxygen-free copper for a pure uninterrupted transfer of power
UPC Code 713034064961
