Kicker Coaxial 6x8" 225W Speakers, 300W 6.5"Speakers, 50FT 14 Gauge Speaker Wire
These CS-Series 6x8-inch Coaxial Speakers are the perfect way to upgrade your factory system. CS-Series Coaxials deliver remarkable performance and ultra-clean bass with a heavy-duty motor/magnet structure not found in stock speakers. A stamped-steel frame supports a rigid polypropylene cone with EVC™ (Extended Voice Coil) technology for the best sonic quality. Using zero-protrusion PEI tweeters with neodymium magnets, you get the clarity you need without interfering with factory grilles. These CS speakers work best with 75 watts of recommended power.
General Features:
- Fits nearly every car made
- Zero-protrusion tweeters to fit nearly any factory depth
- Woofer EVC tech assists with precise linear excursion
- UV-treated poly-foam surround
- Resists heat or direct sunlight
- Large woofer magnet in a heavy-duty motor for ultra-clean bass
- PEI-tweeter construction provides superb clarity
- Neodymium tweeter magnets
- 2-Way Speaker Design
- .5" Balanced Dome Tweeter
- 3.5 Ohm DC Resistance
- 225W Peak Power
- 75W RMS Power
- 90dB Sensitivity
- 45-20kHz Freq Range
- 5x7-3/16" Mounting Hole Diameter
- 3/8" Top Mount Depth
- 2-3/16" Bottom Mount Depth
- Polypropylene Woofer Cone Material
- Polyester Foam Surround
UPC Code 713034088387
These CS-Series 6-1/2-inch Coaxial Speakers are the perfect way to upgrade your factory speakers.
CS-Series Coaxials deliver remarkable performance and ultra-clean bass with a heavy-duty motor/magnet structure not found in stock speakers. The stamped-steel framework supports a rigid polypropylene cone with EVC (Extended Voice Coil) technology for the best sonic quality. Using zero-protrusion PEI tweeters with neodymium magnets, you get the clarity you need without interfering with factory grilles.
These CS speakers work best with 100 watts of recommended power.
General Features:
- Speaker Design: 2-Way Design
- Woofer Size: 6.5"
- Tweeter Size: .5"
- DC Resistance: 3.3
- 300W Peak Power
- 100W RMS Continuous Power
- 90dB Sensitivity
- 40-20kHz Effective Frequency Range
- 4-13/16" Mounting Hole Diameter
- 3/8" Top Mount Depth
- 1-11/16" Bottom Mount Depth
- Grilles Included
- Fits nearly every car made
- Zero-protrusion tweeters to fit nearly any factory depth
- Woofer EVC™ (Extended Voice Coil) tech assists with precise linear excursion
- UV-treated poly-foam surround resists heat or direct sunlight
- Large woofer magnet in a heavy-duty motor for ultra-clean bass
- PEI-tweeter construction provides superb clarity
- Neodymium tweeter magnets allow for increased volume in high frequencies
- Steel mesh grilles included for speaker protection
UPC Code 713034088363
EnrockBasic 14-Gauge Speaker Wire
This 14-gague speaker wire with spool from EnrockBasics lets you easily connect your speakers to amplifiers or receivers.
Marked Polarity
One side of the wire is marked with a white line, making it quick and easy to distinguish the polarity and get your audio system set up properly
Easy to Use
The EnrockBasics 14-gauge Speaker Wire comes wrapped around a hard plastic spool that makes dispensing convenient and easy.
Details
Connects audio speakers to your A/V receiver or amplifier
No Distortion
The plastic jacket around the speaker wire helps to deliver high-quality undistorted signals to and from all of your audio equipment.
General Features:
- 50 Feet of 14-gauge speaker wire.
- Connects audio speakers to your A/V receiver or amplifier.
- The plastic jacket around the speaker wire helps to deliver high-quality undistorted signals to and from all of your audio equipment.
- One side of the wire is marked with a white line, making it quick and easy to distinguish the polarity and get your audio system set up properly.
- Comes wrapped around a hard plastic spool that makes dispensing convenient and easy.
UPC Code 728120443940
