Kicker 10" 4-Ohm Car Audio Subwoofer, 600 Watt Amp, 10" Sub Box, Amp Wiring Kit
Kicker designed their CompR subs for people who love to hear strong bass in their music. The CompR 43CWR104 10” subwoofer comes equipped with a tough, polypropylene cone that stays rigid during intense play sessions so you hear accurate bass.
This Kicker CompR sub will handle up to 400 watts RMS so make sure you have an amplifier that'll do it justice. Its dual 4-ohm voice coils give you more wiring options when setting up your system, and this versatile sub works well in sealed or ported enclosures.
A custom-designed back and top plate give the woofer plenty of room to travel, while the durable rubber surround helps to control cone movement during a heavy workout. This sub uses extensive venting in its heavy steel basket to shrug off heat, so you can count on reliable performance.
- General Features:
- 10" subwoofer with dual 4-ohm voice coils
- injection-molded polypropylene cone
- rubber surround
- power handling: 100-400 watts RMS (200 watts per coil)
- peak power handling: 600 watts
- frequency response: 30-500 Hz
- sensitivity: 84.6 dB.
- top-mount depth: 5-1/4"
- sealed box volume: .80 - 3.0 cu. ft.
- ported box volume: 1.25 - 1.75 cu. ft.
UPC Code 713034076353
CX-Series Mono Amps are now one-ohm stable, giving you even more power and wiring options for your system! Using efficient Class-D power, the CXA400.1 features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump with a simple turn of the optional CXARC Remote Bass Controller. A powerful 12dB crossover and 24dB subsonic filter is included, letting you quickly tune your system to perfection. Use the full-range outputs to expand your system with other bass amps, or a full-range amp to complete your system.
CX.1 Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality at the same time!
Expand your system with full-range, RCA pass-through outputs, then choose a “standard” mount or a cool vertical mount with the included hardware.
CX.1 Amps deliver as much as 400 watts into one bass channel.
General Features:
- Efficient Class-D amplifier
- Three-second turn-on/off delay to eliminate unwanted interference
- Variable 12dB crossovers provides control to dial in perfect sound
- KickEQ™ 6dB variable bass boost for those additional low frequencies
- 24dB subsonic filter for protection from potentially damaging frequencies
- FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
- Accepts up to 40-volt input signal
- Small footprint for easier installation
- Compatible with CXARC Remote Bass Control
- Vertical mounting hardware included for another unique look
Specifications:
- Power (watts/ch) 4 Ohm: 150x1
- Power (watts/ch) 2 Ohm: 300x1
- Power (watts/ch) 1 Ohm: 400x1
- Input Sensitivity:250mV-10V (Low Level) 1V-40V (High Level)
- Signal-to-Noise Ratio: 95dB
- Active Crossover: Variable Lo-pass 50Hz–200Hz, 12dB/octave
- Subsonic Filter: 25Hz @24dB/octave
- KickEQ™ Boost: Variable 0-6dB @40Hz
UPC Code 713034088516
Universal 10" QBomb Series Ported Subwoofer Box by QPower®. Upgrade your road warrior with QPower to get all the benefits from the musical energy. Provide your car's audio system with a kicking sound that is sure to make buddies green with envy. Drive your vehicle like you are at a concert and the car seats are a stage! more details on - https://www.carid.com/qpower/10-qbomb-series-single-round-hole-subwoofer-box-mpn-qbomb10vlsingle.html
Enclosure uses Rhino Linings Brand Spray Coating
DIMENSIONS: 20"W X 11"H X 14"D
Cubic air space = 1.40 cu. ft.
Mounting Depth: 13-1/4"
TURBO PORT OPENING IS 3 1/2" X 3 1/2"
UPC Code 813177022122
This Kicker 8 Gauge Power Amplifier Wiring Kit includes all the necessary hardware and wire to power one amplifier and is designed specifically for car audio systems up to 1000 watts. The included premium power/ground cable is made from 100% oxygen-free copper and is true-to-gauge for ultimate power transfer. This PK8 power amp kit includes 17-feet of 8 Gauge power cable, 2-feet of 8 Gauge ground cable, 17-feet of 16 Gauge remote turn-on wire, 2-channel RCA cable, Maxi Fuse holder, 60 Amp fuse and more. KICKER® amp power kits feature top-quality Hyper-Flex™ power, ground and turn-on cables. A heavy-duty AFS fuse holder, fuse, terminals and zip ties come in the kit as well. One additional year of amplifier warranty is included if purchased with a KICKER amp.
Kicker PK8 General Features:
- 8 Gauge OFC Power Amplifier Installation Kit
- Designed specifically for car audio systems up to 1000 watts
- Premium power and ground wire provides optimal power transfer
- Made from 100% oxygen-free copper for a pure uninterrupted transfer of power
- Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier
UPC Code 713034064978