XDM280BT Bluetooth/CD/AUX Stereo Bundle with 2x 6.5" 225W 2x 180W Speakers+Amp
With this Dual multimedia receiver stream music, podcasts, and audiobooks from your smartphone and adjust tracks forward or backward directly from your receiver. Answer calls easily using the talk button and built-in microphone. Listen to your favorite songs from CDs, USB thumb drives or plug in any device that uses a 3.5mm headphone jack. The USB and 3.5mm inputs are conveniently located on the front of the receiver. The USB input provides high-power 1A charge. 50 Watts of peak power built-in for each of your 4 speakers. Tailor your EQ curve to match your listening preferences. Choose from Pop, Rock, Jazz, Classic, Beat and Flat, or dial in and save your own custom setting.Use the one pair of preamp outputs to add an amplifier for more volume in your system.
General Features:
- Built-in Bluetooth for hands-free calling, audio streaming, and player control.
- Built-in microphone.
- Front panel USB Input (1A charge)
- Front Panel AUX Input
- AM/FM Receiver with 30 Station presets (18FM/12AM)
- Front panel 3.5mm input
- 10 Character LCD
- MP3 playback from CDs and USB drives
- 1 Pair of RCA preamp outputs (front or rear)
- 2 Band tone control (Bass/Treble)
- 7 Preset EQ curves (Pop, Jazz, Classic, Beat, Rock, Flat, and User)
- 200 Watts (50 Watts x 4)
- Wireless IR steering wheel remote included
UPC Code
These JBL Club coaxial speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors, and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Carbon Fiber Woofer with Plus One architecture deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level.
General Features:
- 6-1/2" (160mm) 2-way Car Speaker
- Engineered for Ultimate Sound Quality
- Power Handling: 75W RMS, 225W peak
- Sensitivity (@ 2.83V): 93dB
- Frequency Response: 48Hz – 21kHz
- Nominal Impedance: 3.0 ohms
- Carbon Fiber Woofer with Plus One Architecture
- Edge-driven Silk Dome Tweeter
- Adjustable Tweeter Output Level
- Incredibly Y40 Ferrite Magnet
- I-Mount Tweeter Mounting Kit
In the Box:
- 2x Speakers
- 2x Grilles
- 1x Foam gasket
- 16x Screws
- 8x Speed clips
- 2x Plastic multi-hole adapter rings
- 2x JBL logo badge
UPC Code 050036376686
These JBL Club coaxial speakers bring JBL pro sound to more vehicles. Their compact design means they’ll fit into more vehicles than many of our competitors,and their high sensitivity delivers outstanding performance even with modestly-powered factory systems. Rugged polypropylene cones with the Plus One design deliver hard-hitting bass and long performance life. Edge-driven silk dome tweeters deliver broader and smoother high frequency response, never-harsh regardless of output level.
General Features:
- 6-1/2" (160mm) Two-way Car Speaker,
- Engineered for Better Sound Performance
- Power Handling: 60W RMS, 180W peak
- Sensitivity (@ 2.83V): 93dB
- Frequency Response: 48Hz – 21kHz
- Nominal Impedance: 3.0 ohms
- Plus One Woofer Cone Architecture
- Edge-driven Silk Dome Tweeter
- Adjustable Tweeter Output Level
- Acoustically Damped
- UV-Resistant Polypropylene Cone
- Bigger Magnet, Bigger Power Handling
UPC Code 050036364010
The Club A5055 5-channel amplifier delivers a powerful 50-Watts RMS to each of the front and rear speakers in your car, and a pounding 500-Watts RMS to the subwoofer channel — a much smarter ratio of subwoofer-to-full-range power than what is typical in 5-channel amps. You can also bridge the amp to 3-channel mode to deliver 140-Watts RMS to your front speakers while driving your sub with 500-Watts RMS. Speaker-level inputs allow this amplifier to integrate into almost any system, even one using your car's factory radio. Separate high-pass and low-pass crossovers on the front and rear channels allow you dial in the perfect roll off to best suit speaker placement and cabin acoustics. The subwoofer channel features a low-pass crossover, selectable bass boost, and phase switch to optimize subwoofer performance.
General Features:
- 5 channel car amplifier
- Compact size
- High and low level input
- Variable crossover and bass boost
- Low noise and distortion
- Input Level Control
- Full on-board protection
- Phase Switch
- RBC wired remote
- Class AB+D amp technology
- Turn-on mode
- 50 watts RMS x 4 + 320 watts RMS x 1 at 4 ohms
- 65 watts RMS x 4 + 500 watts RMS x 1 at 2 ohms
- 140 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms
- variable high- and low-pass filters (32-320 Hz, 12 dB/octave) on front and rear channels
- low-pass filter (32-320 Hz, 12 dB/octave) on subwoofer channel
- bass boost on subwoofer channel (0-12dB at 45Hz)
- phase switch on subwoofer channel (0, 180 degrees)
- preamp and speaker-level inputs
- fuse rating: 30A x 3
- 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
- WxHxD=14-3/16” x 2-1/16" x7-1/8”
UPC Code 050036369206
The Enrock 8-Gauge Amplifier Installation Kit makes installing your brand new sound system in your car or truck much easier. It includes all of the cables, wires, tubing, ties, grommets and ring terminals that you will need in order to get your new sound system up and running.
The car amp install kit works with a wide range of sound systems and car types and it makes the installation process much simpler by conveniently adding all your supplies to one single kit.
Kit Includes:
- 20 ft. 8 GA Red Power Cable.
- Competition High Quality Fuse Holder.
- 1/4" Ring Terminal.
- 3 ft. 8 GA Black Ground Cable #10 Ring Terminal.
- 16 ft. 18 GA Blue Turn-On Wire.
- 20 ft. High Performance RCA (TRCA) Interconnect (3) Rubber Grommets.
- 30 ft. Speaker Wire 5/16" Ring Terminal.
- 6 ft. Split Loom Tubing (20) 4" Wire Ties.
UPC Code 728120451105