JBL A1000 1000W Subwoofer Amplifier Bundle with 2x 8" 800W Max Subs & Wiring Kit
The JBL Club A1000 mono subwoofer amplifier delivers 1000-Watts RMS using a Class D amplifier design to ensure high output and minimum current draw. Speaker-level inputs allow this amplifier to integrate into almost any system, even one using your car's factory radio. You can use the low-pass filter and variable bass boost to maximize the performance of your subwoofer and enclosure, while a phase switch ensures that the bass will blend well with your full-range speakers.
General Features:
- 600 watts RMS x 1 at 4 ohms (1000 watts RMS x 1 at 2 ohms)
- Class D amp technology
- frequency response: 10-320 Hz
- variable low-pass filter (32-320 Hz, 12 dB/octave)
- variable bass boost (0-12dB at 45Hz)
- phase switch (0, 180 degrees)
- wired remote level control included
- preamp inputs and outputs
- speaker-level inputs (speaker wire-to-RCA adapters included)
- 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
- fuse rating: 35A x 3
- WxHxD=12-5/8” x 2-1/16" x7-1/8”
UPC Code 050036369183
This price leading JBL Stage car subwoofer was engineered to deliver high-output, low-distortion bass with power handling capability of up to 800 watts peak power. This subwoofer features a lightweight yet stiff polypropylene woofer cone with hi-roll rubber surround to provide high-efficiency and super durability to best interface with a variety of amplifiers. Finally, it is individually voiced by some of the world's best transducer engineers to ensure we achieve the signature sound that is unmistakably JBL.
General Features:
- Power Handling: 200Wrms, 800W peak
- Sensitivity (@2.83V): 88dB
- Frequency Response: 38Hz - 200Hz
- Voice Coil Diameter: 1.5 in. (38.8mm)
- Impedance: 4 ohms
- Polypropylene Woofer Cones
- Hi-Roll Rubber Surrounds
- Individually Voiced
UPC Code 050036381482
The Enrock 8-Gauge Amplifier Installation Kit makes installing your brand new sound system in your car or truck much easier. It includes all of the cables, wires, tubing, ties, grommets and ring terminals that you will need in order to get your new sound system up and running.
The car amp install kit works with a wide range of sound systems and car types and it makes the installation process much simpler by conveniently adding all your supplies to one single kit.
Kit Includes:
- 20 ft. 8 GA Red Power Cable.
- Competition High Quality Fuse Holder.
- 1/4" Ring Terminal.
- 3 ft. 8 GA Black Ground Cable #10 Ring Terminal.
- 16 ft. 18 GA Blue Turn-On Wire.
- 20 ft. High Performance RCA (TRCA) Interconnect (3) Rubber Grommets.
- 30 ft. Speaker Wire 5/16" Ring Terminal.
- 6 ft. Split Loom Tubing (20) 4" Wire Ties.
UPC Code 728120451105