Car Subwoofer And Amp Combo: 2x Kicker 10TC104 Comp 10" 300W Audio Subwoofers Bundle With Lanzar HTG237 1000W Heritage Mosfet Stereo Amplifier + Pyle PLMRAKT8 8 Gauge Marine Amplifier Installation Kit

---

notpyle

2 x 125W RMS @ 4 OHMS

2 x 500W Max @ 4 OHMS

1 x 1000W Max @ 4 OHMS Bridged

2 x 225W RMS @ 2 OHMS

Electronic Crossover Network

Bass Boost Circuit

Bridgeable at 4 Ohms

2 Ohm Stereo Stable

Nickle RCA Inputs

Line Outs for Left and Right Channel

Low Pass Filter Controls

High Pass Filter Controls

Power and Protection LED Indicators

Soft Turn-on/Turn-off

THD: <0.01%.

S/N Ratio: >90dB

Channel Separation: >65dB

Freq. Response: 10Hz~45KHz

HPF Freq. Response: 80KHz

LPF Freq. Response: 50Hz-250Hz

Subwoofer Level Control

Fuse: 25A x 1

Dimensions: 9.84''(L) x 2.24''(H) x 8.81''(W)
UPC Code 068888900744

---

Get all the wires you need to hook up a new marine audio system with this Pyle Hydra amplifier installation kit. These wires have high resistance to moisture, so they’re a great fit on your boat or in outdoor settings. Included wires: 20 ft. 8-gauge red power wire, 4 ft. 8 gauge black ground wire, 20 ft. 18-gauge blue remote turn-on, 20 f. 12 gauge stereo speaker wire, 20 ft. stereo RCA cable, and 6 ft. black split loom cable conduit. Also includes an AGU type 60A gold-plated fuse, water resistant in-line fuse holder, two 8G ring terminals, two 8G spade terminals, five 14-16G spade terminals, 3 butt connectors, 20 cable ties, and one black grommet.

Marine Grade Cables and Wires

Perfect for Installations in Boats and Outdoor

High Resistance to Moisture

20ft. 8 Gauge Red Power Wire

4ft. 8 Gauge Black ground Wire

20ft. 18 Gauge Blue Remote Turn-On

20ft. 12 Gauge StereoSpeaker Wire

20ft. Right Angle/Standard Stereo RCA Audio Cable

6ft. Black Split Loom Cable Conduit

AGU Type 60A Gold Plated Fuse

Water Resistant In-line Fuse Holder

2 Ring Terminals: 8G

2 Spade Terminals: 8G

5 Spade Terminals: 14-16G

3 Butt Connectors 20 Cable Ties

1 Black Grommet
UPC Code 068888882415

---

Kicker's 43TC104 Comp sub features a stiff injection-molded polypropylene cone supported by a double-stitched ribbed foam surround for deep excursion. Kicker's back-braced cone design keeps the woofer stable during those hard hits, while the perimeter venting system helps cool the sub's internal parts during demanding performances. A strong steel basket provides a stable foundation that won't flex during hard use.

This loaded enclosure puts a thumping 10" subwoofer behind the seat of a truck or in any vehicle that's low on space. The rugged ported box was designed specifically for the subwoofer, so you can count on getting maximum performance

• General Features:
• Handles up to 150 watts RMS (300 watts peak power)
• Ported truck-style enclosure with one 10" Comp subwoofer.
• 3/4" medium-density fiberboard construction covered with carpet.
• Injection molded SoloKon cone.
• Optimized Polyfoam Ribbed Surround.
• Extremely rigid cone, along with 360 degree back bracing eliminates distortion.
• 4-ohm Enclosure impedance.
• Double stitched surround for enhanced durability.
• Tinsel leads woven into the spider with Kicker's Spiralead technology.
• Single high-temperature voice coil.
• 45oz. Magnet structure.
• Frequency response: 30-500 Hz.
• Sensitivity: 94 dB.
• Dimensions: 21-3/4"W x 15"H x 7-11/16"D1 x 4-3/4"D2.

UPC Code 713034078685