Sony MEX-DV2100 Radio, Dockable Powered Sub, Line Output Converter, Wiring Kit
This Sony MEX-DV2100 receiver is the perfect product to take your vehicle's factory sound system to the next level. This receiver provides you with FM radio, CD playback and MP3 playback in a stylish and sleek single DIN chassis. The AUX input will allow you to connect your preferred handheld device to the radio for even more media and listening options!
General Features:
- AUX IN
- DVD+R/DVD+RW PLAYBACK: yes
- DVD VIDEO PLAYBACK: yes
- VCD/CD/CD-R/CD-RW PLAYBACK: yes
- MPEG1/2: yes
- JPEG: yes
- DVD-VR/DVD+VR PLAYBACK: yes
- MP3: yes
- DVD-R/DVD-RW PLAYBACK: yes
- FM Radio
- PREOUT OUTPUT LEVEL (V): 4
- MAXIMUM OUTPUT POWER (4?, 1KHZ) (W): 52
- MOUNTING DIMENSIONS (WXHXD) (MM): 182 x 53 x 162
- DIMENSIONS (WXHXD) (MM): 178 x 50 x 181
- PREOUT IMPEDANCE (OHMS): 220
- WEIGHT (KG): Approx. 1.4
UPC Code 4905524454673
This JBL ultra-compact powered subwoofer system achieves jaw-dropping bass performance that is hard to believe for its size. The 140-watt RMS Class D amplifier and proprietary subwoofer combination delivers 100 dB at 10 feet! The subwoofer enclosure is docked to the permanent amplifier base but detaches in just seconds providing extra cargo space when needed. The BassPro Micro includes speaker-level and line-level inputs that easily connect to the car's existing audio system. There are also controls for input sensitivity, crossover frequency, phase and a bass EQ with 9 dB of boost. The BassPro Micro's efficient and streamlined design makes it an ideal upgrade for any car’s audio system. If you are hungry for even more bass, you can daisy chain two units together to deliver real thunder.
General Features:
- Driver Complement: 8"(200mm) Woofer
- Amplifier Power: 140W RMS
- Frequency Response: 35Hz – 120Hz
- Fuse: 15A
- Maximum Current Draw: 14.5A
- Quiescent Current Draw: <800mA
- Input Sensitivity: 0.05V – 2.0V Low-Level
- Input; 0.5V – 20V High-Level Input
- Crossover Frequency: 50Hz – 120Hz
- Crossover Slope: 12dB/octave
- Bass Boost: 0dB to + 9dB @ 65Hz
- Dimensions (L x W x H): 16-3/16"x7"x10-7/8"
- Input sensitivity, Crossover Frequency, Bass EQ and Phase adjustments
- Daisy Chain Connection
- Audio Detect and Remote In
- High- and Low-level Inputs
- Class D amplifier
- Sleek Appearance and Smart Design
In the Box:
- BassPro Micro Subwoofer enclosure
- BassPro Micro Amplifier base
- Hardware for attachment to vehicle
- QSG
- 2 RCA adapters
UPC Code 050036335652
The Enrock 8-Gauge Amplifier Installation Kit makes installing your brand new sound system in your car or truck much easier. It includes all of the cables, wires, tubing, ties, grommets and ring terminals that you will need in order to get your new sound system up and running.
The car amp install kit works with a wide range of sound systems and car types and it makes the installation process much simpler by conveniently adding all your supplies to one single kit.
Kit Includes:
- 20 ft. 8 GA Red Power Cable.
- Competition High Quality Fuse Holder.
- 1/4" Ring Terminal.
- 3 ft. 8 GA Black Ground Cable #10 Ring Terminal.
- 16 ft. 18 GA Blue Turn-On Wire.
- 20 ft. High Performance RCA (TRCA) Interconnect (3) Rubber Grommets.
- 30 ft. Speaker Wire 5/16" Ring Terminal.
- 6 ft. Split Loom Tubing (20) 4" Wire Ties.
UPC Code 728120451105
Add an amplifier to nearly any radio with the KISLOC2 Stereo Line-Out Converter. Experience true sonic accuracy at any volume level, with all the sparkling highs and thunderous lows of your original audio. Unlike traditional LOCs, the KISLOC2 is designed without inductors to deliver a completely flat frequency response at all volume levels.
Using nothing more than your factory speaker wires, the innovative KISLOC2 automatically converts the speaker signal into both an RCA signal and a powerful 100 milli-amp, 12-volt remote wire using DC offset. Powerful enough to turn on multiple amplifiers, the 12-volt remote wire delivers plenty of power without hunting for a switched 12-volt power source.
General Features:
- Accepts up to 55 watts (16 volts) of input signal
- Fully compatible with standard radios and most smart radios*
- Delivers up to an 8-volt output signal
- Flat 20Hz-20kHz frequency range at all volume levels
- Includes a powerful 100 milli-amp, remote turn-on wire
- No 12V power source needed
- LED indicator for DC offset turn-on
UPC Code 713034001423
