Kicker 42PXA300.4 PXA Series Weather-Resistant Marine Car Audio 4-Channel Amplifier, Bundle Combo With Enrock Audio 8 Gauge Complete Amplifier Wiring Installation Kit

---

Kicker PXA300.4 PXA Series 4 Channel Amplifier Made for all environments, PXA-Series Amplifiers are weather-resistant with a conformal-coated circuit board for extra protection against the elements. Small Footprint PXA-Series Power Amplifiers are specifically designed for motorized vehicles with small battery/charging systems, and in an incredibly small footprint that can be installed in motorcycle saddle bags or fairings, glove compartments and other previously unusable spaces. Easy! No-rust, stainless-steel mounting hardware and a single Molex plug containing all wiring connections makes for easy installation. 2 Turn-on Modes PXA Amps utilize a speaker (amplified) or low (pre-amp)-level input, variable input gain adjustment and two auto turn-on modes (DC offset or 12-volt trigger). Real-World Open-Air Sound The sound output is undeniably KICKER. PXA Amps take into account real-world, open-air listening in powersports applications, smartly directing precious power where it succeeds - in the 40-to-250-hertz frequency range where a biker or rider can truly hear and feel it in the open air. It also contains a differential audio circuit that reduces engine noise in the audio system for low T.H.D. (total harmonic distortion) and superb clarity at high volumes.

General Features:

• 4-channel amplifier
• 50 watts RMS x 4 at 4 ohm (75 watts RMS x 4 at 2 ohm)
• 150 watts RMS x 2 at 4 ohms bridged
• frequency response: 10-20,000 Hz
• switchable high-pass filter (60, 80, or 120 Hz at 24 dB/octave)
• preamp and speaker-level inputs as well as two auto turn-on modes
• 8-gauge power and ground leads recommended — wiring and hardware not included with amplifier
• fuse rating: 40A x 1

UPC Code 713034073741

---

The Enrock 8-Gauge Amplifier Installation Kit makes installing your brand new sound system in your car or truck much easier. It includes all of the cables, wires, tubing, ties, grommets and ring terminals that you will need in order to get your new sound system up and running.

The car amp install kit works with a wide range of sound systems and car types and it makes the installation process much simpler by conveniently adding all your supplies to one single kit.

Kit Includes:

• 20 ft. 8 GA Red Power Cable.
• Competition High Quality Fuse Holder.
• 1/4" Ring Terminal.
• 3 ft. 8 GA Black Ground Cable #10 Ring Terminal.
• 16 ft. 18 GA Blue Turn-On Wire.
• 20 ft. High Performance RCA (TRCA) Interconnect (3) Rubber Grommets.
• 30 ft. Speaker Wire 5/16" Ring Terminal.
• 6 ft. Split Loom Tubing (20) 4" Wire Ties.

UPC Code 728120451105