Kicker CXA400.1 400W Mono Amplifier w/Kit, Remote, 12" 1200W Subwoofer Enclosure
This CX-Series amp reaches massive power levels thanks to an optimized circuit layout and the highest-grade internal components. Highly efficient heat sinks keep the amp cool with a sophisticated look.
CX-Series Mono Amps are now one-ohm stable, giving you even more power and wiring options for your system! Using efficient Class-D power, the CXA400.1 features a variable bass boost with KickEQ, giving you as much as a 6dB of extra bump with a simple turn of the optional CXARC Remote Bass Controller. A powerful 12dB crossover and 24dB subsonic filter is included, letting you quickly tune your system to perfection. Use the full-range outputs to expand your system with other bass amps, or a full-range amp to complete your system.
CX.1 Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality at the same time!
Expand your system with full-range, RCA pass-through outputs, then choose a “standard” mount or a cool vertical mount with the included hardware.
CX.1 Amps deliver as much as 400 watts into one bass channel.
General Features:
- Efficient Class-D amplifier
- Three-second turn-on/off delay to eliminate unwanted interference
- Variable 12dB crossovers provides control to dial in perfect sound
- KickEQ 6dB variable bass boost for those additional low frequencies
- 24dB subsonic filter for protection from potentially damaging frequencies
- FIT+ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
- Accepts up to 40-volt input signal
- Small footprint for easier installation
- Compatible with CXARC Remote Bass Control
- Vertical mounting hardware included for another unique look
- Power (watts/ch) 4 Ohm: 150x1
- Power (watts/ch) 2 Ohm: 300x1
- Power (watts/ch) 1 Ohm: 400x1
- CXRC Remote Bass Capable (sold sep.): yes
- Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L): 8-1/8, 20.6
- Frequency Response (Hz): 25-200, +0/-1dB
- Input Sensitivity:: 250mV-10V (Low Level), 1V-40V (High Level)
- Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power
- Active Crossover: Variable Lo-pass 50Hz–200Hz, 12dB/octave
- Subsonic Filter: 25Hz @24dB/octave
- KickEQ Boost: Variable 0-6dB @40Hz
UPC Code 713034012788
This optional remote level control allows you to adjust the bass from CX-Series mono amps right from the dash. Dial it up the way you want to hear it. The CXARC is a remote bass controller, compatible with any CX, DX or PX KICKER amplifier equipped with a REMOTE BASS jack on its end.
Remote Bass Controller:
- Compatible with the KEY500.1 and any CX, DX or PX KICKER amp equipped with a REMOTE BASS jack
- Cable Length - 19.75 feet
- Durable Construction
UPC Code 713034012825
The Kicker complete amp kit features top-quality Hyper-Flex power, ground and turn-on cables. K Series speaker wire and interconnects are also included, as is a heavy-duty AFS fuse holder and fusing. Insulated crimp connectors and zip ties come in the kit as well.
Comes complete with Full Spec wire, hardware, fusing and signal cable.
Hooking up your amplifier is easy with this complete amp kit. All kits include pure, full-spec OFC (oxygen-free copper) cabling for max power transfer, superior bass response and signal clarity.
Included In Amp Kit:
- 17 ft 4 awg blue power wire
- 4 ft 4 awg gray ground wire
- Self tapping bolt and washer
- FHS fuse holder with 100 amp fuse L=3.06", W=1.33", H=1.32"
- 17 ft 16 gauge remote wire
- 16.4 ft KI RCAs
- 12 ft Q series 12 awg speaker wire
- 6x 6" zip ties
- 4 awg firewall grommet
- 1x 18-22 awg butt connector
- 4x 12 awg fork terminals
- 2x blue fork terminal boots
- 2x black fork terminal boots
UPC Code 713034088653
JBL designed their Club Series 122SL 12” subwoofer for versatility. Its low-profile design allows it to fit into shallow enclosures, and its selectable impedance gives you flexibility in configuring your system. That means it'll fit in just about any vehicle and into any upgrades you make to your bass setup. Unlike most other dual voice coil subs, this sub's Selectable Smart Impedance (SSI™) switch makes it easy to change the sub's impedance from 2 ohms to 4 ohms, the most commonly used impedances. The sub's proprietary aluminum cone punches out bass as low as 30Hz and handles up to 400 watts RMS. It works equally well in free-air applications, or in sealed, bandpass, or ported enclosures, another example of its versatility.
Genral Features
- Subwoofer: 12" (300mm) Aluminum Driver
- Power Handling: 400W RMS, 1200W peak
- Sensitivity: (1W/1m)85dB
- Frequency Response: (-6dB)30Hz – 500Hz
- Nominal Impedance: 2 or 4 ohms, switch-selectable
- Voice Coil Diameter: 2" (50mm)
- Cutout Diameter: 11" (279.04mm)
- Mounting Depth: 3-1/4" (82.5mm)
What's in The Box?
- 1x 12" Subwoofer
- 1x EVA Foam Gasket
- 1x Owner’s Manual
UPC Code 050036399487
