2x Crunch CS653 6.5" 3Way 300W Full Range Speakers, 2-Channel Class AB Amplifier
Crunch CS653C 6.5" 3-Way 300W Max Full Range Automotive Speakers
These Crunch CS653 6.5" 3-Way 300 watt speaker utilizes Neo Mylar Soft Dome Tweeters and Silver Alpha-Cellulose Poly Cones to ensure an impressive sound output and sonic clarity. The UV resistant and moisture resistant rubber surrounds guarantees reliable service even through prolonged use. The Kapton voice coil and the over-coil cooling system proves to be lightweight and efficiently dissipates heat throughout high performance applications. The Passive Butterworth crossover provides smooth transition frequencies from midrange/midbass to the tweeter element.
General Features:
- 3-Way Full-Range Design
- 150W RMS Power
- 300W Peak Power
- 4-Ohm Impedance
- Frequency Response: 40-22kHz
- Sensitivity: 88dB
- Mounting Diameter/Cutout: 5.59"
- Outside Diameter: 7.01"
- Mounting Depth/Chassis Depth: 2.13"
- Neo-Mylar Soft Dome Tweeter
- UV-Resistant Rubber Surround
- Silver Alpha-Cellulose Poly Cones
- Textured ABS Gasket
- Braided Tinsel Leads
- Pure Copper Voice Coil
- Kapton Voice Coil Former
- Epoxy Infused Natural Fiber Spider
- Over Coil Cooling System
- Passive Butterworth Crossover
- 6dB Internal Crossover Special
- Anti-Resonant Stamped Steel Basket
- Ferrite Motor Magnet
- Spade Connectors
UPC Code 806576222132
Crunch PXA-1200.2 1200 Watt 2-Channel Class A/B Car Audio Amplifier
This Crunch PXA-1200.2 PowerX Series 2-Channel amplifier delivers huge power in an efficient heatsink. Features include built-in electronic crossovers and high-level inputs. The High energy PWM (Pulse Width Modulated) power supply provides MAXXimum power with minimal electrical impact while the QTD (Quick Thermal Dispersion) technology assures the amplifier makes huge power while running very cool with nearly undetectable musical distortions. This amp can pump 300W of power per channel at 4 Ohms.
General Features:
- 2-Channel Class A/B
- Power @ 2-Ohms: 2 x 600W
- Power @ 4-Ohms: 2 x 300W
- Mono Bridged @ 4-Ohms: 1 x 1200 @ 4-Ohms Bridged
- Crossover: Switchable, Full/HPF/LPF
- Variable HP Crossover 12dB Per Octave: 60-1.2kHz
- Variable LP Crossover 12dB Per Octave: 30-250Hz
- Built-In Bass Control
- Bass Boost: 0-9dB
- Variable Voltage: 6V - 0.2V
- Signal to Noise: >95dB
- Freq. Response: 10-45kHz
- THD: <0.05%
- Speaker Level Audio Inputs: Small Connector (MOLEX) to drive "Hi Input"
- Preamp Outputs: 1 Pair, Full-Range, RCA
- Power Terminal: Spade Connector Recommended
- Speaker Terminal Wire Gauge: Spade Connector Recommended
- Fusing: 20 x 1
- Low Noise Preamplifier Circuitry
- RCA Inputs
- Hi Level Inputs
- Electronic Equalizer
- SPEED-FET MOSFET Components
- QTD Heatsink
- Pulse Width Modulated Power Supply
- Full-Range RCA Outputs for Signal Pass Through
- LED System Protection Circuitry Diagnostics
UPC Code 806576228752
1 Year Manufacturer Warranty