Dual D65SP 6.5" 100W Speakers (Pair), 10" Sub Enclosure, Amp w/Kit, Wire, Tool
The D65SP feature an impressive 100 Watts of Peak Power, 50 Watts RMS, 4 Ohm Impedance, and a Frequency Response range from 80Hz to 20kHz for powerful, far-reaching sound that fills your car. Crafted with quality and durability in mind, these speakers boast a black mylar dome and stainless steel mounting hardware. Meet the high standards you expect for your vehicle with this premium build.
General Features:
- 100 Watt peak power
- 50 Watt RMS
- 1” Black mylar dome
- Treated foam surround
- Sensitivity: 86dB
- Frequency response: 80Hz – 20kHz
- Elevate your driving experience
UPC Code 827204122044
The TS-A2500LB features a compact, space-saving enclosure designed for optimal use of space. The enclosure is shallow enough for mounting in a wide variety of vehicles, including pickup trucks with standard or extended-cab models. Its unique design allows it to be mounted upright, lying flat facing upwards, or configured in a down-firing position. The enclosure is fully carpeted with an embroidered Pioneer logo, creating a non-slip and scratch-resistant surface. This Shallow-Mount Pre-Loaded Enclosure provides a maximum power of 1200 W with continuous 300 W RMS. The subwoofer features a glass fiber and mica interlaced, injection-molded polypropylene IMPP cone with a 2 ? single voice coil. The subwoofer is also fully protected by a steel mesh grille. For installation flexibility, the feet and cushions are removable to enable different layout configurations to suit your vehicle’s application.
General Features:
- 1200 Watts Max. Power / 300 Watts Nominal Power
- 10" Glass-fiber & Mica reinforced IMPP™ Cone
- Rubber Surround & Aramid-fiber dual-spider design
- Frequency range: 20 Hz to 1.0 kHz
- Speaker Impedance: 2 ohms
- Speaker Efficiency: 88 dB (1W/1M)
- Box dimensions (WxHxD) : 20.875" (530mm) x 11.750" (300mm) x 5.875" (150mm)
- Rigid mesh grill and removable feet included
UPC Code 884938446587
The JBL Apex PA454 weather-resistant 4-channel multi-application Class D amplifier features an ultra-compact aluminum chassis and small footprint design to allow for versatile installation. The Apex Series PA454 powersports amplifier delivers efficient Class D power and is designed to fit into tight spaces and withstand outdoor environments without missing a beat. Available with 4-channels of output power, the Apex Series PA454 includes selectable front/rear electronic crossover frequency adjustment for quick and easy installation.
General Features:
- Ultra-Compact Aluminum Chassis
- Conformal Coated PCB
- Big Dynamic Power
- Full-Range Outputs and Selectable Crossovers
- High and low level Inputs
- Max Power: 450W peak
- RMS Power Output @ 4O: 45W x 4, <1% THD+N
- Selectable hi-pass filter: off, 60-, 80-, 120Hz @ 12dB/octave
- Frequency Response: 20Hz – 20kHz
- Signal-to-Noise Ratio: >75dB (ref 1W output @ 4O)
- Fuse rating: 15A
UPC Code 050036359092
Power your marine amplifier with a wiring kit that can withstand the harsh environment and still deliver full sound performance. Fully tinned wiring ensures that these amp kits won’t corrode or oxidize and turn green after a season on the water. Oxygen-free copper provides a reliable connection with maximum conductivity. By using 100% virgin copper the tin won’t flake off, something commonly seen when using recycled copper materials. While it is also common to tin just the tips of the wire for cost savings, this practice does not actually provide any benefits. Metra’s amp kits use fully tinned copper wire from top to bottom that can withstand a harsh marine environment and salty air. The ignition-protected 50-amp circuit breaker is IP67 rated with stainless steel connection points for corrosion resistance
Amplifier Wiring Kit:
- Marine compliant amplifier wiring kit
- Fully tinned 100% virgin copper wire
- BC5W2 marine compliant jacket
- 50-amp marine circuit breaker is rated IP67 with stainless steel connection points for corrosion resistance
- Easy to solder tinned wiring
- Connectors, ring terminals, and wire ties included
What’s in the box:
- (1) 8-gauge tinned oxygen-free copper side-by-side red power and yellow ground wire (10ft.)
- (1) 18-gauge tinned oxygen-free copper blue remote turn-on wire (18ft.)
- (2) 8-gauge ring terminal with shrink tube and logo, pre-terminated on each end of the 2ft. red wire
- (1) 8-gauge ring terminal with shrink tube and logo, pre-terminated on 8ft. red wire
- (1) 8-gauge ring terminal with shrink tube and logo, pre-terminated on yellow wire
- (1) Ignition protected circuit breaker (50-amp)
UPC Code 086429416820
A ground-breaking virgin-PVC, Hyper-Flex insulation and multi-strand construction allows you to bend, twist, and contort the cable in any way imaginable for an ultimate installation experience while delivering maximum current flow; remains ultra-flexible under hot or cold temperature extremes; transfers the cleanest audio signal possible by using tightly twisted, silver-tinned OFC copper conductors; zip line to easily remove outer insulation.
Speaker Wire:
- 20 Feet
- 16 Gauge
- Silver-tinned OFC (oxygen-free copper)
UPC Code 632016086404
4- Piece Car Door Trim Panel Dash Stereo Radio Installer Removal Pry Tools Plastic
Easily remove Trim, Molding, Door panels and Dashboards Great for automotive snap on trim panel and molding removal Also works great for furniture repair soft and hard woods, antiques restorations, upholstery, leather work etc Rugged durable plastic construction prevents marring Works on interior and exterior trim.
4- Piece Car Door Trim Panel Dash Stereo Radio Installer Removal Pry Tools Plastic Tool Set
- Unique design allows access under trim to remove piece correctly--at the fastener point.
- Versatile tool set that pays for itself with just one use; saves time and frustration.
- Professional-grade kit of 4 incredibly useful tools for removing auto body trim and molding.
- Easily remove Trim, Molding, Door panels and Dashboards.
- Works on interior and exterior trim, wide edge remover, narrow edge remover, pull-type remover, handle remover and upholstery clip remover.
UPC Code 840440918233

