Pyle PLMRB29W Single DIN Marine In-Dash Receiver W/Kit + Cover, Amp Booster Kit
The Pyle PLMRB29W Stereo Headunit System features versatile media playback capability.
Built-in Bluetooth allows for wireless music streaming and the built-in microphone gives you hands-free calling ability. Conveniently answer or reject incoming calls safely so you can focus on navigation.
The single DIN universal standard comes loaded with features like AM/FM radio with 30 station memory, USB flash drive reader, SD memory card reader and Aux (3.5mm) input connector jack. You'll have the ability to connect and stream audio from all of your favorite devices (like smartphones, tablets, MP3 players, etc.)
General Features:
- Single DIN Universal Size Standard
- MAX. Power: 300 Watt (75W x 4)
- Bluetooth Wireless Audio Streaming & Hands-Free Calling
- AM/FM Stereo Radio, 30 Station Memory
- USB Flash & SD Memory Card Readers
- Aux (3.5mm) Input Connector Jack
- LCD Digital Display Panel
- (2) Pair Rear Panel RCA (L/R) Audio Output Connectors
- Equalizer (EQ) Electronic Audio Configuration
- Remote Control Included
UPC Code 068888765084
Enrocks EORA102 is a universal AM/FM antenna that is easy to hide in your motorcycle, automobile, truck, and even boat! Just hide it anywhere. Simply hook up, peel, and stick. Will stick on to glass, roof, headliner, inside the camper, mounts to any surface.
General Features:
- Electronic Stereo Radio Hidden Amplified Antenna Kit
- Hidden Amplified Antenna Design for Direct Replacement
- Covering all AM / FM Broadcast Radio
- Input: Thoroughfare / Output Impedance: 750HM
- Dimension: 3.75" X 1" X 0.75"
Installation Instructions
- Connect Antenna Plug of this unit to Car Radio Antenna Socket
- Connect Black 12v positive to accessories
- Secure Antenna to clean flat surface
- Connect Silver wire to good ground
- If extra gain/pickup is required, connect the red wire to positive side of rear window demister. (this connection is optional)
UPC Code 728120484479
This stereo installation kit has been engineered to help you install a 2" tall (Single-DIN) aftermarket radio into the original inner fairing of a HD motorcycle, making radio replacement simple. The kit is designed to match the original look and feel of the inner fairing.
Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn't offer but requires this kit to make it fit. To keep the audio controls on the handlebars working with the new radio, you'll need a handlebar control interface (SOLD SEPARATELY).
General Features:
- Stereo installation kit designed to fit any standard 2" tall aftermarket single DIN radio.
- One-piece design fends off moisture and vibration.
- Designed for an original factory-like fit and finish.
- Includes brackets and hardware parts needed with detailed installation instructions.
Applications
- Single DIN radio
- HD FLH 1998-2013 (Batwing fairing) Roadglide 1998-2013 (Sharknose fairing)
UPC Code 728120484431
Protect your new radio from the dirt and weather found on the open road with this handy Radio Shield. The cover's frame fits in your bike's single-DIN opening, and you can then push the cover over your receiver. A unique O-ring seals the cover tightly around your receiver, so you can stop worrying about dust and water getting into the electronics.
UPC Code 810126530271
