Pyle PLRMR23BTW Bluetooth MP3 Receiver, 4x 6.5" Speakers, Amp w/Kit, Sub, Wire
Pyle PLRMR23BTW Single DIN Bluetooth Marine MP3/USB/SD/AM/FM Stereo Receiver
The Pyle Digital Marine Stereo Receiver features versatile media playback capability. The single DIN universal standard comes loaded with features like AM/FM radio, USB flash drive reader, SD memory card reader and Aux (3.5mm) input connector jack. You'll have the ability to connect and stream audio from all of today’s latest devices like Smartphones, Tablets and MP3 Players. Digital audio file support allows you to stream your favorite playlists -- while ID3 tag song readout info displays the song artist and song title on the LCD display screen. Control it all with the front panel buttons or use the included remote control. Add convenient and versatile audio playback ability with the Pyle Marine Radio Headunit Receiver System.
General Features:
- In-Dash Console Marine Stereo System
- Stereo Radio Receiver with AM/FM Radio
- Bluetooth Wireless Music Streaming
- Built-in Microphone for Hands-Free Talking
- USB Flash Drive & Micro SD Memory Card Readers
- Aux (3.5mm) Input Connector Jack
- Ability to Connect Additional External Devices
- (Smartphones, MP3 Players, Tablets)
- Rear RCA (L/R) Output Connector Jacks
- Illuminated Button Controls
- LCD Digital Display Panel
- ID3 Tag Song Readout Information: Name, Title & Artist
- Repeat/Random Music Functions
- Bass, Treble, Balance, Fader Adjustment
- EQ Audio Configuration
- Used for Automobile, Off-Road, Boat & Marine Watercraft
Bluetooth Receiver Connectivity:
- Built-in Bluetooth Wireless Music Streaming Receiver
- Integrated Front Panel Microphone for Hands-Free Calling
- Compatible with All of Your Favorite Bluetooth Devices
- (iPhone, Androids, Smartphones, iPad, Tablets, etc.)
- Bluetooth Version: 2.0
- Bluetooth Network Name: ‘Pyle’
- Wireless Range: 25’+ ft.
- Remote Control
Receiver Technical Specs:
- Single DIN Universal Standard Size
- Receiver MAX. Power: 300 Watt (75W x 4)
- Bluetooth Support: A2DP, AVRCP, HSP, HFP
- MPX/PLL Tuning Radio System
- S/N Ratio: >60dB
- Tone Controls: +/-10dB
- Stereo Separation: >45dB
- Receiver Current Drain: 15 Amp
- Digital Audio File Support: MP3, WMA
- Maximum USB/Micro SD Support Size: 32GB
- Frequency Response: 20-20kHz
- Power: DC 12V
- Receiver Chassis Dimensions: 178(W) x 108(D) x 50(H) mm
UPC Code 068888772310
Pyle PLMR62 Dual 6.5'' Inch 200-Watt Water Resistant 2-Way Full Range Marine Speakers with Built-in Tweeters (x2)
Pyle's Hydra series speakers are water resistant and designed for use in your boat, on the dock, by the pool, or simply mounted outside. They're designed with rust-proof mesh covers for quality protection. The PLMR62 is a 200-watt, 6.5' two-way, full-range speaker suitable for marine use. These white speakers are equipped with a ½' neodymium dome tweeter for rich highs and a 1' aluminum voice coil for accurate sound reproduction. The molded ABS plastic basket keeps your sound distortion-free.
General Features:
- 6.5'' High Quality Poly Carbon Cone
- 2-Way Water Resistant Construction Design
- 1'' High Temperature Voice Coil
- 1/2'' Neodymium Dome Tweeter
- 200 Watts Rated Peak Power
- Frequency Response: 85Hz-20K Hz
- 4 Ohm Impedance
- Sensitivity: 90dB
- Mounting Depth: 2.5''
- Cut-out Size: F135 mm
UPC Code 068888723138
PLMRA420 Pyle 4 Channel 1000 Watt Waterproof Marine Bridgeable Mosfet Amplifier (White)
This Pyle Hydra amp will power your speakers on the dock, in your boat, or by the pool - it's completely waterproof. This 4-channel, 1000-watt bridgeable marine amp takes both high and low level inputs, so it's compatible with a variety of head units and sources. Use in stereo, or double the power by bridging inputs. Comes with variable electronic crossover network, variable bass boost, and variable gain control for total control over your sound. Blue LED level display lets you keep an eye on your signal. For protection, count on the thermal, overload, and short circuit protection. Runs on 12 volts DC.
Amplifier:
- 250 Watts x 4 Output
- 500 Watts x 2 Bridged Output (250W x 2 + 500W x 1)
- Dual Variable Hi/Lo Electronic Crossover Network
- Dual Variable Bass Boost
- Power On LED Indicator
- LED Protection Indicator
- Blue LED Level Display
- Tri-Mode Configurable
- Variable Input Level (Gain) Control
- Thermal, Overload, Short Circuit Protection
- Dimensions: 10.9'' W x 2.7'' H x 12'' L
UPC Code 068888724852
Pyle PLMRW8 8" 400 Watt 4 Ohm Marine Subwoofer (White)
This 400-watt Pyle Hydra subwoofer will blow you out of the water! It's constructed from water resistant plastic, supporting a 8' high quality polypropylene cone. The 40 oz. magnet structure and 1.5' high temperature voice coil boom with power and achieve a frequency response of 35 Hz to 3.5 kHz.
General Features:
- 8'' High Quality Polypropylene Cone
- Water Resistant Construction Design
- 40 oz Magnet Structure
- 1.5'' High Temperature Voice Coil
- 400 Watts Peak Power
- Frequency Response: 35-3.5K Hz
- 4 Ohm Impedance
- Sensitivity: 91 dB
- Overall Diameter: 8.5''
- Mounting Depth: 3.60''
UPC Code 068888880954
Metra ML-AK8-10 8 Gauge Amplifier Wiring Marine Kit - 10ft. w/ Circuit Breaker
Power your marine amplifier with a wiring kit that can withstand the harsh environment and still deliver full sound performance. Fully tinned wiring ensures that these amp kits won’t corrode or oxidize and turn green after a season on the water. Oxygen-free copper provides a reliable connection with maximum conductivity. By using 100% virgin copper the tin won’t flake off, something commonly seen when using recycled copper materials. While it is also common to tin just the tips of the wire for cost savings, this practice does not actually provide any benefits. Metra’s amp kits use fully tinned copper wire from top to bottom that can withstand a harsh marine environment and salty air. The ignition-protected 50-amp circuit breaker is IP67 rated with stainless steel connection points for corrosion resistance
Amplifier Wiring Kit:
- Marine compliant amplifier wiring kit
- Fully tinned 100% virgin copper wire
- BC5W2 marine compliant jacket
- 50-amp marine circuit breaker is rated IP67 with stainless steel connection points for corrosion resistance
- Easy to solder tinned wiring
- Connectors, ring terminals, and wire ties included
What’s in the box:
- (1) 8-gauge tinned oxygen-free copper side-by-side red power and yellow ground wire (10ft.)
- (1) 18-gauge tinned oxygen-free copper blue remote turn-on wire (18ft.)
- (2) 8-gauge ring terminal with shrink tube and logo, pre-terminated on each end of the 2ft. red wire
- (1) 8-gauge ring terminal with shrink tube and logo, pre-terminated on 8ft. red wire
- (1) 8-gauge ring terminal with shrink tube and logo, pre-terminated on yellow wire
- (1) Ignition protected circuit breaker (50-amp)
UPC Code 086429416820
Pyle PLMRSW50 18 Gauge 50 Ft Marine Grade Speaker Wire
This Pyle Hydra marine speaker wire is water-resistant, so it's ideal for use in your new marine installation. This blue and white wire is 18 gauge and comes on a 50 ft. spool. Hear your music with clarity and accuracy with this Pyle Hydra marine grade wire.
General Features:
- 18 AWG Stereo Wire
- Blue White Marine Grade Insulation
- Ideal for new Marine Installation
- 50ft Length Spool
UPC Code 068888882477
1 Year Manufacturer Warranty
