Metra 3-Zone Boat Controller, 4x 6.5" 130W Speakers W/Grilles, 4-CH Amp W/Kit
This easy-to-install controller with Bluetooth wireless technology puts audio controls at your fingertips. It allows users to control the volume independently for three zones or simultaneously on the primary setting. An LED backlight on the remote indicates which zone is active. The controller is equipped with built-in connectivity with Bluetooth technology and auxiliary input. A high-quality internal digital signal processor produces lossless audio output to your sound system. The controller is rated IPX7, making it ideal for marine and powersports applications.
Features
- Control volume +/-, track FWD/PREV, PLAY/PAUSE, and auxiliary input
- Control the volume of 3 zones independently
- LED backlit controller
- Equipped with Bluetooth® wireless technology
- Supports APTX-HD, APTX, APTX-X Low Latency, SBC, and ACC audio formats
- 24-bit lossless audio processor
- Rated IPX7 for powersports & marine applications
- Switch between Bluetooth® wireless technology & auxiliary inputs
- Amplifier remote turn-on output
- (3) 4V 2-channel RCA outputs
- Frequency range: 18Hz to 25KHz
- Bluetooth® wireless technology range: 35ft
- Input voltage: 12V-24V
- 1-year warranty
UPC Code 086429430727
Kicker KM614FL 6.5" marine speakers have a thin-mount grille design. Kicker Real Marine technology ensures all components are splash-and-spray sealed and come with rust-proof hardware. Tested for UV and salt/fog exposure to withstand harsh marine conditions. Come with a pair of white grilles and a pair of silver grilles with open-hole tweeters. The grilles easily snap on.
Built in multi-color RGB LED lighting offers 7 standard colors. Using the Kicker 41KMLC LED Remote (optional NOT INCLUDED) will allow for an additional option of 20 colors and 19 modes, also buttons to adjust the fade, brightness and speed/strobe.
This KM 6.5" Speaker works best with 65 watts of recommended power.
General Features:
- Thin-Mount Grille Design
- Comes with Two Sets of Grilles – an OE-style white pair and a silver pair with open-hole tweeters
- Spectacular Highs and Smooth, Impactful Midrange
- ASTM-Tested for UV and Salt/Fog Exposure
- KICKER Real Marine with Splash-and-Spray, Sealed Components and Rust-proof Hardware
- Multi-Color RGB Lighting
- Select Colors and Modes with the KICKER KMLC LED Remote Control (sold separately)
Specifications:
- Woofer(in,mm): 6-1/2, 165
- Tweeter(in,mm): 1/2, 13
- Tweeter Dome Material: PEI
- Rated Impedance(Ω):4
- Peak Power: 130 watts
- Recommended Amplifier Power: 60 Watts
- Sensitivity(1W,1m): 90
- Frequency Response(Hz): 35-21k
- Mounting Hole Diameter(in,mm): 5-1/4, 132
- Mounting Depth(in,mm): 2-13/16, 64
- Grilles 2 pair (OE-style white/silver with open tweeter)
UPC Code 713034091691
Using a Class-D power plant, this amp features a variable bass boost with KickEQ™, giving you as much as 6dB of extra bump. Powering as many as eight speakers, this amplifier makes your entire boat sound like a floating concert! A powerful 12dB crossover is also included, letting you quickly tune your system to perfection. This KM-Series amplifier delivers 90 watts into four channels, or 180 watts bridged into two channels.
General Features:
- Class D Power Supply
- 500 Watts of Dynamic Power
- Four-Channel Amplifier with Bridging Capability
- Conformal-Coated Circuit Board
- Variable 12dB Crossover
- KickEQ Variable 6dB Bass Boost
- Real Marine ABYC/NMMA-Compliant Power Connections
- 316L Stainless-Steel Hardware Included
- POWER [watts/ch], 2 OHM STEREO: 90 x 4
- POWER [watts/ch], 4 OHM BRIDGED MONO: 180 x 2
- DYNAMIC POWER [watts]: 500
- DIMS [in] all models 2-5/16H x 7-1/8W x ___L: 12-7/16
- DIMS [cm] all models 5.9H x 18.0W x ___L: 31.5
- FREQUENCY RESPONSE [Hz]: 10-20k, +0/-1dB
- High Level Sensitivity: 250mV-10V
- Low Level Sensitivity: 125mV-5V
- SIGNAL-TO-NOISE RATIO: >95dB, a-weighted, re: rated power
- ACTIVE CROSSOVER: 12dB/octave, variable 50-200Hz, selectable high pass, low pass or all pass
- KickEQ BOOST Variable 0-6dB, centered @ 40Hz
UPC Code 713034020370
Power your marine amplifier with a wiring kit that can withstand the harsh environment and still deliver full sound performance. Fully tinned wiring ensures that these amp kits won’t corrode or oxidize and turn green after a season on the water. Oxygen-free copper provides a reliable connection with maximum conductivity. By using 100% virgin copper the tin won’t flake off, something commonly seen when using recycled copper materials. While it is also common to tin just the tips of the wire for cost savings, this practice does not actually provide any benefits. Metra’s amp kits use fully tinned copper wire from top to bottom that can withstand a harsh marine environment and salty air. The ignition-protected 50-amp circuit breaker is IP67 rated with stainless steel connection points for corrosion resistance
Features:
- Marine compliant amplifier wiring kit
- Fully tinned 100% virgin copper wire
- BC5W2 marine compliant jacket
- 50-amp marine circuit breaker is rated IP67 with stainless steel connection points for corrosion resistance
- Easy to solder tinned wiring
- Connectors, ring terminals, and wire ties included
- What’s in the box:
- (1) 8-gauge tinned oxygen-free copper side-by-side red power and yellow ground wire (10ft.)
- (1) 18-gauge tinned oxygen-free copper blue remote turn-on wire (18ft.)
- (2) 8-gauge ring terminal with shrink tube and logo, pre-terminated on each end of the 2ft. red wire
- (1) 8-gauge ring terminal with shrink tube and logo, pre-terminated on 8ft. red wire
- (1) 8-gauge ring terminal with shrink tube and logo, pre-terminated on yellow wire
- (1) Ignition protected circuit breaker (50-amp)
UPC Code 086429416820
