Controller, 4x 8" 500W Max Speakers, Pods, Sub, Amp, Kit, Adapter, Antenna, Wire
This easy-to-install controller with Bluetooth wireless technology puts audio controls at your fingertips. It allows users to control the volume independently for three zones or simultaneously on the primary setting. An LED backlight on the remote indicates which zone is active. The controller is equipped with built-in connectivity with Bluetooth technology and auxiliary input. A high-quality internal digital signal processor produces lossless audio output to your sound system. The controller is rated IPX7, making it ideal for marine and powersports applications.
Features
- Control volume +/-, track FWD/PREV, PLAY/PAUSE, and auxiliary input
- Control the volume of 3 zones independently
- LED backlit controller
- Equipped with Bluetooth® wireless technology
- Supports APTX-HD, APTX, APTX-X Low Latency, SBC, and ACC audio formats
- 24-bit lossless audio processor
- Rated IPX7 for powersports & marine applications
- Switch between Bluetooth® wireless technology & auxiliary inputs
- Amplifier remote turn-on output
- (3) 4V 2-channel RCA outputs
- Frequency range: 18Hz to 25KHz
- Bluetooth® wireless technology range: 35ft
- Input voltage: 12V-24V
- 1-year warranty
UPC Code 086429430727
JBL's Stadium Marine loudspeakers leverage JBL’s world class audio engineering and music reproduction with purpose-built marine loudspeakers that will survive the rigors of the harsh marine environment. Choose from the most popular sizes for boats and watercraft. The 6.5" coaxial, 8" three-way convertible speaker system and 10" woofer have Plus One polypropylene woofer and midrange cones, Mylar tweeter domes (Except Subwoofer), one piece cast polymer baskets, sealed magnets, and rubber woofer surrounds for high SPL performance. Wind, water or engine noise will not drown them out. Speakers are UV resistant in a marine grade IPX3 (IPX5 from front) weather resistant and include RGB perimeter illumination and go through 300 hours of salt spray testing. And they're ready to make amazing music on the water. Whether it's a daily scrub down, a picnic in a quiet cove or an all-out race across high swells, JBL has the right configuration for your craft.
General Features:
- 8" 3-Way Marine Audio Speakers (Pair)
- Multi-Color RGB LED lights
- Plus One woofer cone for outstanding performance
- Grille-mounted midrange driver and Mylar tweeter
- Tweeters can be mounted as separates or as coaxials
- Convertible design means more installation options
- One-piece cast polymer basket
- IPX5 rated for water resistance
- 200 watts RMS
- 500 watts Peak Power
- Sensitivity: 92 dB at 2.83 volts
- Frequency response: 30-22,000 Hz
- Impedance: 3 ohms
UPC Code
The Metra Unloaded Speaker Pods comes in black texture with black powder coated aluminum mounting hardware. Install your speaker using the water tight speaker wire grommet. Constructed of durable UV protected HDPE.
Speaker Pods:
- Unloaded 8" speaker pods
- Black texture finish
- Constructed of durable and UV protected HDPE
- Water tight speaker wire grommet
- Aluminum Mounts with rubber inserts
- Roll bar and golf cart adapters included
UPC Code 086429414239
This 10" marine subwoofer delivers powerful bass with 300W RMS (900W peak) and features multi-color RGB LED lights for stylish flair. Built with a durable Plus One polypropylene cone and one-piece cast polymer basket, it's IPX5 water-resistant and perfect for marine use. Switchable 2- or 4-ohm impedance, 20–2000 Hz frequency response, and 89 dB sensitivity ensure versatile, high-performance sound.
General Features:
- 10" marine subwoofer
- multi-color RGB LED lights
- Plus One polypropylene cone
- one-piece cast polymer basket
- IPX5 rated for water resistance
Specifications:
- power handling: 300 watts RMS (900 peak)
- impedance: switchable 2- or 4-ohm
- frequency response: 20-2000 Hz
- sensitivity: 89 dB at 2.83V
What's in the box:
- One marine subwoofer with fixed gray polymer grille
- 6" LED Harness
- Six 1-3/8" Stainless-steel screws (3mm Allen head)
- 6 Stainless-steel speed clips
- 3mm Allen head bit
- Adhesive backed foam gasket
- 1 Black JBL logo grille badge
- 1 Orange JBL logo grille badge
- Owner's manual (English/ French/ Spanish/ Russian)
- 2 JBL Stickers
UPC Code 050036384971
The Kicker KXMA five-channel marine amp delivers power and performance with a full-system solution in a single, powerful amplifier. Every KXMA amp comes complete with anti-corrosive speaker, power and RCA terminals, stainless-steel screws, conformal-coated circuit boards and ABYC/NMMA-compliant power connections. Kicker products also undergo rigorous testing to ensure they meet or exceed marine industry standards. This unparalleled commitment to engineering quality and maritime safety is why Kicker products truly are "Real Marine." Gain, crossover and bass-boost controls are protected behind a gasket-sealed panel, as is the control cover hiding the settings, creating a water-resistant barrier to key controls. KickEQ delivers as much as an 6dB of extra bump with a simple turn of the knob. A powerful 24dB crossover is also included, letting you quickly tune your system to perfection. A wired bass controller is also included for perfecting your sound on the fly. Easily adjust the levels of your subwoofer channel without leaving your seat! This KXMA amplifier delivers as much as 125 watts into four full-range channels, or 250 watts into two sets of bridged channels. A separate subwoofer channel delivers as much as 400 watts.
General Features:
- Class D Amplifier
- Gain Control With "Gain Match" LED Indicator
- FIT2 (Fail-safe Integration Technology) Circuitry
- Variable 24dB Crossover
- DSP-Controlled Preamp
- KickEQ 6dB Variable Bass Boost
- ABYC/NMMA-Compliant Power Terminals
- Conformal-Coated Circuit Boards
- Easy Access to Settings behind Gasket-Sealed Cover Panel
- Black Anodized Aluminum Chassis
- Top-Mounted, Teal LED Light Pipe
- Stainless-Steel Mounting Hardware Included
- POWER [watts/ch], 2 OHM STEREO: 125 x 4
- POWER [watts/ch], 4 OHM STEREO: 100 x 4
- POWER [watts/ch], 4 OHM BRIDGED MONO: 250 x 2
- SUB CHANNEL POWER [watts/ch]@ 4Ω power: 200x1 @ 1% THD+N
- SUB CHANNEL POWER [watts/ch]@ 2Ω power: 400x1 @ 1% THD+N
- SUB CHANNEL POWER [watts/ch]@ 1Ω power: 400x1 @ 1% THD+N
- DYNAMIC POWER [watts]:: 1300
- DIMENSIONS [in] all models 2-1/8H x 8-5/16W x 12-3/4L
- DIMENSIONS [cm] all models 5.4H x 21.0W x 32.4L
- FREQUENCY RESPONSE [Hz]: (amp 1&2) 10-20k, +0/-1dB; (mono) 10-160
- INPUT SENSITIVITY: High Level 250mV-10V, Low Level 125mV-5V
- SIGNAL-TO-NOISE RATIO: >95dB, a-weighted, re: rated power
- SUBSONIC FILTER [KXMA.5]:: (mono only) high-pass variable 10-80Hz
- KickEQ BOOST: (mono only) Variable 0-6dB, centered 40Hz
- COMES WITH WIRED REMOTE: Yes
- ACTIVE CROSSOVER
UPC Code 713034020646
Power your marine amplifier with a wiring kit that can withstand the harsh environment and still deliver full sound performance. Fully tinned wiring ensures that these amp kits won’t corrode or oxidize and turn green after a season on the water. Oxygen-free copper provides a reliable connection with maximum conductivity. By using 100% virgin copper the tin won’t flake off, something commonly seen when using recycled copper materials. While it is also common to tin just the tips of the wire for cost savings, this practice does not actually provide any benefits. Metra’s amp kits use fully tinned copper wire from top to bottom that can withstand a harsh marine environment and salty air. The ignition-protected 50-amp circuit breaker is IP67 rated with stainless steel connection points for corrosion resistance
Features:
- Marine compliant amplifier wiring kit
- Fully tinned 100% virgin copper wire
- BC5W2 marine compliant jacket
- 50-amp marine circuit breaker is rated IP67 with stainless steel connection points for corrosion resistance
- Easy to solder tinned wiring
- Connectors, ring terminals, and wire ties included
- What’s in the box:
- (1) 8-gauge tinned oxygen-free copper side-by-side red power and yellow ground wire (10ft.)
- (1) 18-gauge tinned oxygen-free copper blue remote turn-on wire (18ft.)
- (2) 8-gauge ring terminal with shrink tube and logo, pre-terminated on each end of the 2ft. red wire
- (1) 8-gauge ring terminal with shrink tube and logo, pre-terminated on 8ft. red wire
- (1) 8-gauge ring terminal with shrink tube and logo, pre-terminated on yellow wire
- (1) Ignition protected circuit breaker (50-amp)
UPC Code 086429416820
This rugged Enrock EKMR1 marine soft wire universal antenna gives you performance, durability and plenty of placement options. The flexible wire makes it the perfect hideaway antenna, while the corrosion-resistant rubber exterior confirms that it will stand up to salt and spray. The 22inch long flexible wire will make mounting it a breeze.
Radio Antenna:
- 22" AM/FM Marine Antenna
- Improves Radio reception
UPC Code 799861388630
The Universal USB/3.5mm Auxiliary Interface Mount and Cable measures 10 feet in length and will convert your AUX inputs to USB.
AUX/USB Adaptor:
- USB to RCA pass-through extension cable
- Cable Length: 3m (10ft)
UPC Code 799861390145
Enrock's 16-Gauge Speaker Wire is a smart solution to your audio installation. This wire comes in 50 feet to give you convenient installation and pure sound quality enhancement. The cable is tinned and oxygen free copper (OFC) to deliver high-quality sound without any transmission loss. Marine grade speaker wiring made simple. Just use high quality marine duplex wiring with it's fine stranded tin plated copper to resist corrosion.
General Features:
- Connects audio speakers to your Audio Video (A/V) receiver or amplifier.
- Marine grade tinned wire
- Oxygen Free Copper (OFC)
- Length: 50 Feet
- Gauge: 16
UPC Code 728120479901

