IBBTR9 Bluetooth Controller, 6x 6.5" 300W Tower Speakers, 6CH Amplifier, Kit
Metra IBBTR19 Marine 3-Zone Bluetooth Controller
This easy-to-install controller with Bluetooth wireless technology puts audio controls at your fingertips. It allows users to control the volume independently for three zones or simultaneously on the primary setting. An LED backlight on the remote indicates which zone is active. The controller is equipped with built-in connectivity with Bluetooth technology and auxiliary input. A high-quality internal digital signal processor produces lossless audio output to your sound system. The controller is rated IPX7, making it ideal for marine and powersports applications.
Features
- Control volume +/-, track FWD/PREV, PLAY/PAUSE, and auxiliary input
- Control the volume of 3 zones independently
- LED backlit controller
- Equipped with Bluetooth® wireless technology
- Supports APTX-HD, APTX, APTX-X Low Latency, SBC, and ACC audio formats
- 24-bit lossless audio processor
- Rated IPX7 for powersports & marine applications
- Switch between Bluetooth® wireless technology & auxiliary inputs
- Amplifier remote turn-on output
- (3) 4V 2-channel RCA outputs
- Frequency range: 18Hz to 25KHz
- Bluetooth® wireless technology range: 35ft
- Input voltage: 12V-24V
- 1-year warranty
UPC Code 086429430727
Kicker KMTCXL65 6.5" 300 Watts Peak Power White LED Tower System Speaker (Pair) (x3)
Award-winning KMXL Horn-Loaded Speakers, dropped inside a pair of tough black or white KICKER tower cans for any all-weather use. Loud, clear, and convenient. Upgradable to 20 colors and 19 lighting modes with the KICKER LED Remote
General Features:
- Award-Winning, High-Output, Compression-Horn Design
- Powerful Lightweight Neodymium Motor
- Incredible Loud, Smooth Volume from 8-inch or 6.5-inch Drivers
- Customizable LED Lighting to Match Theme or Mood*
- UV-Resistant Polymer Enclosure Cans in Black or White
- Revolutionary 354-Degree Can Rotation and Mounting Bracket
- Stainless-Steel Mounting Clamp Fits Most Tubing
- Meets or Exceeds ASTM Standards for UV** and Salt/Fog Exposure
Specifications:
- Woofers (in, mm): 6.5, 165
- Horn Loaded Compression Drivers (in, mm): 1-1/4, 32
- Rated Impedance (Ohms): 4
- Recommended Amp Power (watts RMS): 15-150
- Peak Power (watts): 300
- Sensitivity (1W, 1m): 90
- Frequency Response (Hz): 90-20k
- Woofers (in, mm): 6.5, 165
- Horn Loaded Compression Drivers (in, mm) :1-1/4, 32
- Rated Impedance (Ohms): 4
- Recommended Amp Power (watts RMS): 15-150
- Peak Power (watts): 300
- Sensitivity (1W, 1m):90
- Frequency Response (Hz):90-20k
UPC Code 713034091639
Kicker KMA600.6 6-Channel 50 Watts x 6 Weather-Resistant Full-Range Class D Amplifier
Use this flexible six-channel KM-Series marine amplifier to power up to three zones! Using a Class-D power plant, this amp features a variable bass boost with KickEQ, giving you as much as 6dB of extra bump on the Amp. Powering as many as 12 speakers, this amplifier makes your entire boat sound like a floating concert! A powerful 12dB crossover is also included, letting you quickly tune your system to perfection.
- General Features:
- Ultra-Efficient Class D Design
- 750 Watts of Dynamic Power
- Three Zones of Control
- Six-Channel Amplifier with Bridging Capability
- Conformal-Coated Circuit Board
- Variable 12dB Crossover
- KickEQ Variable 6dB Bass Boost
- Real Marine™ ABYC/NMMA-Compliant Power Connections
- 316L Stainless-Steel Hardware Included
- POWER [watts/ch], 2 OHM STEREO: 100 x 6
- POWER [watts/ch], 4 OHM STEREO: 50 x 6
- POWER [watts/ch], 4 OHM BRIDGED MONO: 200 x 3
- DYNAMIC POWER [watts]: 750
- Dimensions [in] all models 2-5/16 H x 7-1/8 W x 13-15/16 L
- FREQUENCY RESPONSE [Hz]: 10-20k, +0/-1dB
- INPUT SENSITIVITY: High Level 250mV-10V, Low Level 125mV-5V
- SIGNAL-TO-NOISE RATIO: >95dB, a-weighted, re: rated power
- ACTIVE CROSSOVER: (amp 1 and amp 2) 12dB/octave, variable 0-200Hz, HP only; (amp 3) 12dB/octave, variable 50-200Hz, Off/HP/LP
- SUBSONIC FILTER: (amp 3 only) 24dB/octave, high pass fixed @ 25Hz
- KickEQ BOOST: (amp 3 only) Variable 0-6dB, centered @ 40Hz
UPC Code 713034020387
Metra 8 AWG Marine Amp Kit - 10ft. w/ Circuit Breaker
Power your marine amplifier with a wiring kit that can withstand the harsh environment and still deliver full sound performance. Fully tinned wiring ensures that these amp kits won’t corrode or oxidize and turn green after a season on the water. Oxygen-free copper provides a reliable connection with maximum conductivity. By using 100% virgin copper the tin won’t flake off, something commonly seen when using recycled copper materials. While it is also common to tin just the tips of the wire for cost savings, this practice does not actually provide any benefits. Metra’s amp kits use fully tinned copper wire from top to bottom that can withstand a harsh marine environment and salty air. The ignition-protected 50-amp circuit breaker is IP67 rated with stainless steel connection points for corrosion resistance
Features:
- Marine compliant amplifier wiring kit
- Fully tinned 100% virgin copper wire
- BC5W2 marine compliant jacket
- 50-amp marine circuit breaker is rated IP67 with stainless steel connection points for corrosion resistance
- Easy to solder tinned wiring
- Connectors, ring terminals, and wire ties included
- What’s in the box:
- (1) 8-gauge tinned oxygen-free copper side-by-side red power and yellow ground wire (10ft.)
- (1) 18-gauge tinned oxygen-free copper blue remote turn-on wire (18ft.)
- (2) 8-gauge ring terminal with shrink tube and logo, pre-terminated on each end of the 2ft. red wire
- (1) 8-gauge ring terminal with shrink tube and logo, pre-terminated on 8ft. red wire
- (1) 8-gauge ring terminal with shrink tube and logo, pre-terminated on yellow wire
- (1) Ignition protected circuit breaker (50-amp)
UPC Code 086429416820
1 Year Manufacturer Warranty
