IBBTR9 Bluetooth 3-Zone Controller, 8x 6.5" 195W Speakers W/Grilles, Amp, Kit
Metra IBBTR19 Marine 3-Zone Bluetooth Controller
This easy-to-install controller with Bluetooth wireless technology puts audio controls at your fingertips. It allows users to control the volume independently for three zones or simultaneously on the primary setting. An LED backlight on the remote indicates which zone is active. The controller is equipped with built-in connectivity with Bluetooth technology and auxiliary input. A high-quality internal digital signal processor produces lossless audio output to your sound system. The controller is rated IPX7, making it ideal for marine and powersports applications.
Features
- Control volume +/-, track FWD/PREV, PLAY/PAUSE, and auxiliary input
- Control the volume of 3 zones independently
- LED backlit controller
- Equipped with Bluetooth® wireless technology
- Supports APTX-HD, APTX, APTX-X Low Latency, SBC, and ACC audio formats
- 24-bit lossless audio processor
- Rated IPX7 for powersports & marine applications
- Switch between Bluetooth® wireless technology & auxiliary inputs
- Amplifier remote turn-on output
- (3) 4V 2-channel RCA outputs
- Frequency range: 18Hz to 25KHz
- Bluetooth® wireless technology range: 35ft
- Input voltage: 12V-24V
- 1-year warranty
UPC Code 086429430727
Kicker KM65 6.5-Inch (165mm) Marine Coaxial Speakers with 3/4-Inch (20mm) Tweeters, 4-Ohm, Charcoal and White Grilles (Pair) (x4)
The Kicker 45KM654 6.5 Inch Marine Coaxial Boat Speakers with Black and White Grilles feature UV treatments on injection-molded cones, Santoprene surrounds, baskets and grilles all help maintain top-shelf performance. KM speakers will endure almost any weather conditions with splash-and-spray-resistant sealed motors, cones and Locking/Sealed Terminal Covers. Speaker hardware is forged from rustproof, 316L stainless-steel.
Speakers:
- 6.5 inch Coaxial Speakers
- Power Handling: 195 Watts Peak
- Power Handling: 65 Watts RMS
- SNR: 90 dB
- Frequency Range: 35-21K
- Impedance: 4 Ohm
- IP66 certification (protected from dust and water jets/splash)
- Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure
- UV-Treated Polypropylene Woofer With Santoprene Surround
- 316L Stainless Mounting Hardware Included
- Charcoal and White Grilles Included
UPC Code 713034085096
Kicker KXMA800.8 800 Watt 8-Channel Full-Range Class D Marine Audio Amplifier
The KXMA 800-watt, eight-channel amplifier is one of the most flexible marine power pieces available today. The KICKER Real Marine standard means your amplifier is purpose-built for your boat. Every KXMA (and KMA)-Series amp comes complete with anti-corrosive speaker, power and RCA terminals, stainless-steel screws, conformal-coated circuit boards and ABYC/NMMA-compliant power connections. KICKER products also undergo rigorous testing to ensure they meet or exceed marine industry standards for UV, humidity and saltwater exposure. This unparalleled commitment to engineering quality and maritime safety is why our products truly are "Real Marine." Gain, crossover and bass-boost conrols are protected behind a gasket-sealed panel, as is the control cover hiding the settings, creating a water-resistant barrier to key controls. KickEQ delivers as much as an 6dB of extra bump with a simple turn of the knob. A powerful 24dB crossover is also included, letting you quickly tune your system to perfection. This KXMA amplifier delivers as much as 100 watts into eight full-range channels, or 200 watts into four sets of bridged channels.
General Features:
- Class D Amplifier
- Gain Control With "Gain Match" LED Indicator
- FIT2 (Fail-safe Integration Technology) Circuitry
- Variable 24dB Crossover
- DSP-Controlled Preamp
- KickEQ™ 6dB Variable Bass Boost
- ABYC/NMMA-Compliant Power Terminals
- Conformal-Coated Circuit Boards
- Easy Access to Settings behind Gasket-Sealed Cover Panel
- Black Anodized Aluminum Chassis
- Top-Mounted, Teal LED Light Pipe
- Stainless-Steel Mounting Hardware Included
- POWER [watts/ch], 2 OHM STEREO: 100 x 8
- POWER [watts/ch], 4 OHM STEREO: 50 x 8
- POWER [watts/ch], 4 OHM BRIDGED MONO:: 200 x 4
- DYNAMIC POWER [watts]: 1200
- DIMENSIONS [in] all models 2-1/8H x 8-5/16W x ___L: 14-3/4
- DIMENSIONS [cm] all models 5.4H x 21.0W x ___L: 37.4
- FREQUENCY RESPONSE [Hz]: 10-20k, +0/-1dB
- INPUT SENSITIVITY: High Level 250mV-10V, Low Level 125mV-5V
- SIGNAL-TO-NOISE RATIO: >95dB, a-weighted, re: rated power
- ACTIVE CROSSOVER: (amp 1 and amp 2) 24dB/octave, Off/ HP/LP, variable 10-5kHz w/ 10x switch
- ACTIVE CROSSOVER: (amp 3 and amp 4) 24dB/octave, Off/ HP/LP/BP, variable HP 10–500Hz; variable
- LP, 40–5kHz w/ 10x switch
- KickEQ BOOST: Variable 0-6dB, centered @ 40Hz (amps 1, 2, 3 and 4)
UPC Code 713034020653
Metra 8 AWG Marine Amp Kit - 10ft. w/ Circuit Breaker
Power your marine amplifier with a wiring kit that can withstand the harsh environment and still deliver full sound performance. Fully tinned wiring ensures that these amp kits won’t corrode or oxidize and turn green after a season on the water. Oxygen-free copper provides a reliable connection with maximum conductivity. By using 100% virgin copper the tin won’t flake off, something commonly seen when using recycled copper materials. While it is also common to tin just the tips of the wire for cost savings, this practice does not actually provide any benefits. Metra’s amp kits use fully tinned copper wire from top to bottom that can withstand a harsh marine environment and salty air. The ignition-protected 50-amp circuit breaker is IP67 rated with stainless steel connection points for corrosion resistance
Features:
- Marine compliant amplifier wiring kit
- Fully tinned 100% virgin copper wire
- BC5W2 marine compliant jacket
- 50-amp marine circuit breaker is rated IP67 with stainless steel connection points for corrosion resistance
- Easy to solder tinned wiring
- Connectors, ring terminals, and wire ties included
- What’s in the box:
- (1) 8-gauge tinned oxygen-free copper side-by-side red power and yellow ground wire (10ft.)
- (1) 18-gauge tinned oxygen-free copper blue remote turn-on wire (18ft.)
- (2) 8-gauge ring terminal with shrink tube and logo, pre-terminated on each end of the 2ft. red wire
- (1) 8-gauge ring terminal with shrink tube and logo, pre-terminated on 8ft. red wire
- (1) 8-gauge ring terminal with shrink tube and logo, pre-terminated on yellow wire
- (1) Ignition protected circuit breaker (50-amp)
UPC Code 086429416820
1 Year Manufacturer Warranty
