Metra Marine Boat 3-Zone Controller, 6x 6.5" 195W Speaker W/Grille, 6CH Amp, Kit
This easy-to-install controller with Bluetooth wireless technology puts audio controls at your fingertips. It allows users to control the volume independently for three zones or simultaneously on the primary setting. An LED backlight on the remote indicates which zone is active. The controller is equipped with built-in connectivity with Bluetooth technology and auxiliary input. A high-quality internal digital signal processor produces lossless audio output to your sound system. The controller is rated IPX7, making it ideal for marine and powersports applications.
Features
- Control volume +/-, track FWD/PREV, PLAY/PAUSE, and auxiliary input
- Control the volume of 3 zones independently
- LED backlit controller
- Equipped with Bluetooth® wireless technology
- Supports APTX-HD, APTX, APTX-X Low Latency, SBC, and ACC audio formats
- 24-bit lossless audio processor
- Rated IPX7 for powersports & marine applications
- Switch between Bluetooth® wireless technology & auxiliary inputs
- Amplifier remote turn-on output
UPC Code 086429430727
Kickers 6 ½” marine speakers emit perfect sound. Planned for life at sea, these powerful 4-ohm speakers provide sealed motors, rubber cone surrounds, and locking terminal covers to keep your internal components safe. They’ll be ok under harsh sunlight, due to special UV treatments on the cones, surrounds, baskets and grilles. Wherever you take them, those speakers will provide years of perfect performance.
The Kicker speakers are strong for marine use yet easy on the ears. The tough poly woofers and balanced dome tweeters plow through wind, waves and engine roar to provide you with clear sound without any roughness. Whether you mount them up top or install them in custom enclosures, these Kicker speakers will make your time at sea that much more entertaining.
General Features:
- Pair of Kicker 6.5" 195W Peak / 65W RMS 4-Ohm 2-Way Coaxial Marine Speakers
- Power Handling Per Speaker: 195 Watts Peak / 65 Watts RMS Per Speaker
- Power Handling Per Pair: 390 Watts Peak / 130 Watts RMS Per Pair
- 2-Way Design
- Santoprene Surrounds
- Woofer Size: 6.5"
- Woofer Composition Titanium
- Tweeter Size: 1/2"
- Tweeter Dome Material: Titanium
- Impedance: 4-Ohms
- Sensitivity: 90dB
- Frequency Response: 35-21,000 Hz
- Cutout Dimensions: 5.12"
- Top-Mount Depth: 2.87"
- warranty: 1 year?
- impedance: 4 ohms
- mounting depth: 2-3/8"
- sealed motor structure and locking terminal covers
- 1/2" balanced dome titanium tweeter
- UV-treated polypropylene woofer with Santoprene rubber surround
- Comes in bulk packaging with no additional hardware or accessories
UPC Code 713034071068
6.5" White Grille for Kicker 6.5" Marine Coaxial MultiColor LED Speaker
6.5" White Grille for Kicker 6.5" Marine Coaxial MultiColor LED Speaker
UPC Code 713034086420
Use this flexible six-channel KM-Series marine amplifier to power up to three zones! Using a Class-D power plant, this amp features a variable bass boost with KickEQ, giving you as much as 6dB of extra bump on the Amp. Powering as many as 12 speakers, this amplifier makes your entire boat sound like a floating concert! A powerful 12dB crossover is also included, letting you quickly tune your system to perfection.
- General Features:
- Ultra-Efficient Class D Design
- 750 Watts of Dynamic Power
- Three Zones of Control
- Six-Channel Amplifier with Bridging Capability
- Conformal-Coated Circuit Board
- Variable 12dB Crossover
- KickEQ Variable 6dB Bass Boost
- Real Marine™ ABYC/NMMA-Compliant Power Connections
- 316L Stainless-Steel Hardware Included
- POWER [watts/ch], 2 OHM STEREO: 100 x 6
- POWER [watts/ch], 4 OHM STEREO: 50 x 6
- POWER [watts/ch], 4 OHM BRIDGED MONO: 200 x 3
- DYNAMIC POWER [watts]: 750
- Dimensions [in] all models 2-5/16 H x 7-1/8 W x 13-15/16 L
- FREQUENCY RESPONSE [Hz]: 10-20k, +0/-1dB
- INPUT SENSITIVITY: High Level 250mV-10V, Low Level 125mV-5V
- SIGNAL-TO-NOISE RATIO: >95dB, a-weighted, re: rated power
- ACTIVE CROSSOVER: (amp 1 and amp 2) 12dB/octave, variable 0-200Hz, HP only; (amp 3) 12dB/octave, variable 50-200Hz, Off/HP/LP
- SUBSONIC FILTER: (amp 3 only) 24dB/octave, high pass fixed @ 25Hz
- KickEQ BOOST: (amp 3 only) Variable 0-6dB, centered @ 40Hz
UPC Code 713034020387
Power your marine amplifier with a wiring kit that can withstand the harsh environment and still deliver full sound performance. Fully tinned wiring ensures that these amp kits won’t corrode or oxidize and turn green after a season on the water. Oxygen-free copper provides a reliable connection with maximum conductivity. By using 100% virgin copper the tin won’t flake off, something commonly seen when using recycled copper materials. While it is also common to tin just the tips of the wire for cost savings, this practice does not actually provide any benefits. Metra’s amp kits use fully tinned copper wire from top to bottom that can withstand a harsh marine environment and salty air. The ignition-protected 50-amp circuit breaker is IP67 rated with stainless steel connection points for corrosion resistance
Features:
- Marine compliant amplifier wiring kit
- Fully tinned 100% virgin copper wire
- BC5W2 marine compliant jacket
- 50-amp marine circuit breaker is rated IP67 with stainless steel connection points for corrosion resistance
- Easy to solder tinned wiring
- Connectors, ring terminals, and wire ties included
- What’s in the box:
- (1) 8-gauge tinned oxygen-free copper side-by-side red power and yellow ground wire (10ft.)
- (1) 18-gauge tinned oxygen-free copper blue remote turn-on wire (18ft.)
- (2) 8-gauge ring terminal with shrink tube and logo, pre-terminated on each end of the 2ft. red wire
- (1) 8-gauge ring terminal with shrink tube and logo, pre-terminated on 8ft. red wire
- (1) 8-gauge ring terminal with shrink tube and logo, pre-terminated on yellow wire
- (1) Ignition protected circuit breaker (50-amp)
UPC Code 086429416820
