IBBTR9 Marine Boat Controller, 8x 8" 300W Speakers W/Grille, Class D Amp, Kit
This easy-to-install controller with Bluetooth wireless technology puts audio controls at your fingertips. It allows users to control the volume independently for three zones or simultaneously on the primary setting. An LED backlight on the remote indicates which zone is active. The controller is equipped with built-in connectivity with Bluetooth technology and auxiliary input. A high-quality internal digital signal processor produces lossless audio output to your sound system. The controller is rated IPX7, making it ideal for marine and powersports applications.
Features
- Control volume +/-, track FWD/PREV, PLAY/PAUSE, and auxiliary input
- Control the volume of 3 zones independently
- LED backlit controller
- Equipped with Bluetooth® wireless technology
- Supports APTX-HD, APTX, APTX-X Low Latency, SBC, and ACC audio formats
- 24-bit lossless audio processor
- Rated IPX7 for powersports & marine applications
- Switch between Bluetooth® wireless technology & auxiliary inputs
- Amplifier remote turn-on output
UPC Code 086429430727
This Kicker 8” marine grade speaker emits great sound and appeal on any boat. Perfect for life at sea, these speakers are constructed with sealed motors, rubber cone surrounds and locking terminal covers to keep the internal components safe. They’ll be ok under harsh sunlight, due to special UV treatments on the cones, surrounds, baskets and grilles. Wherever you take them, those speakers will provide years of perfect performance.
The Kicker speaker is strong for marine use yet easy on the ears. The tough poly woofer and balanced dome tweeter plow through wind, waves and engine roar to provide you with clear sound without any roughness.
General Features:
- Four-Ohm Voice Coil
- 300 Watt Peak Power / 150 Watts RMS
- One-Inch Titanium Tweeter
- UV-Treated Polypropylene Woofer With Santoprene Surround
- UV-Resistant Polymer Basket
- Locking/Sealed Terminal Cover
- Sealed Motor Structure
- Seven-Color LED System Included
- Salt/Fog/UV Tested
- 4-Ohm Impedance
- Multicolor LED Lighting Capability
- Comes in bulk packaging with no additional hardware or accessories
UPC Code 713034085126
8" Silver Grille for Kicker Speaker
8" Silver Grille for Kicker Speaker
UPC Code 713034085188
The KXMA 800-watt, eight-channel amplifier is one of the most flexible marine power pieces available today. The KICKER Real Marine standard means your amplifier is purpose-built for your boat. Every KXMA (and KMA)-Series amp comes complete with anti-corrosive speaker, power and RCA terminals, stainless-steel screws, conformal-coated circuit boards and ABYC/NMMA-compliant power connections. KICKER products also undergo rigorous testing to ensure they meet or exceed marine industry standards for UV, humidity and saltwater exposure. This unparalleled commitment to engineering quality and maritime safety is why our products truly are "Real Marine." Gain, crossover and bass-boost conrols are protected behind a gasket-sealed panel, as is the control cover hiding the settings, creating a water-resistant barrier to key controls. KickEQ delivers as much as an 6dB of extra bump with a simple turn of the knob. A powerful 24dB crossover is also included, letting you quickly tune your system to perfection. This KXMA amplifier delivers as much as 100 watts into eight full-range channels, or 200 watts into four sets of bridged channels.
General Features:
- Class D Amplifier
- Gain Control With "Gain Match" LED Indicator
- FIT2 (Fail-safe Integration Technology) Circuitry
- Variable 24dB Crossover
- DSP-Controlled Preamp
- KickEQ™ 6dB Variable Bass Boost
- ABYC/NMMA-Compliant Power Terminals
- Conformal-Coated Circuit Boards
- Easy Access to Settings behind Gasket-Sealed Cover Panel
- Black Anodized Aluminum Chassis
- Top-Mounted, Teal LED Light Pipe
- Stainless-Steel Mounting Hardware Included
- POWER [watts/ch], 2 OHM STEREO: 100 x 8
- POWER [watts/ch], 4 OHM STEREO: 50 x 8
- POWER [watts/ch], 4 OHM BRIDGED MONO:: 200 x 4
- DYNAMIC POWER [watts]: 1200
- DIMENSIONS [in] all models 2-1/8H x 8-5/16W x ___L: 14-3/4
- DIMENSIONS [cm] all models 5.4H x 21.0W x ___L: 37.4
- FREQUENCY RESPONSE [Hz]: 10-20k, +0/-1dB
- INPUT SENSITIVITY: High Level 250mV-10V, Low Level 125mV-5V
- SIGNAL-TO-NOISE RATIO: >95dB, a-weighted, re: rated power
- ACTIVE CROSSOVER: (amp 1 and amp 2) 24dB/octave, Off/ HP/LP, variable 10-5kHz w/ 10x switch
- ACTIVE CROSSOVER: (amp 3 and amp 4) 24dB/octave, Off/ HP/LP/BP, variable HP 10–500Hz; variable
- LP, 40–5kHz w/ 10x switch
- KickEQ BOOST: Variable 0-6dB, centered @ 40Hz (amps 1, 2, 3 and 4)
UPC Code 713034020653
Power your marine amplifier with a wiring kit that can withstand the harsh environment and still deliver full sound performance. Fully tinned wiring ensures that these amp kits won’t corrode or oxidize and turn green after a season on the water. Oxygen-free copper provides a reliable connection with maximum conductivity. By using 100% virgin copper the tin won’t flake off, something commonly seen when using recycled copper materials. While it is also common to tin just the tips of the wire for cost savings, this practice does not actually provide any benefits. Metra’s amp kits use fully tinned copper wire from top to bottom that can withstand a harsh marine environment and salty air. The ignition-protected 50-amp circuit breaker is IP67 rated with stainless steel connection points for corrosion resistance
Features:
- Marine compliant amplifier wiring kit
- Fully tinned 100% virgin copper wire
- BC5W2 marine compliant jacket
- 50-amp marine circuit breaker is rated IP67 with stainless steel connection points for corrosion resistance
- Easy to solder tinned wiring
- Connectors, ring terminals, and wire ties included
- What’s in the box:
- (1) 8-gauge tinned oxygen-free copper side-by-side red power and yellow ground wire (10ft.)
- (1) 18-gauge tinned oxygen-free copper blue remote turn-on wire (18ft.)
- (2) 8-gauge ring terminal with shrink tube and logo, pre-terminated on each end of the 2ft. red wire
- (1) 8-gauge ring terminal with shrink tube and logo, pre-terminated on 8ft. red wire
- (1) 8-gauge ring terminal with shrink tube and logo, pre-terminated on yellow wire
- (1) Ignition protected circuit breaker (50-amp)
UPC Code 086429416820
