Pioneer SPH-C10BT USB Receiver, 4x 6x9" 4-Way Speakers, 4CH Amp, Wiring Kit
The SPH-C10BT is Pioneer’s flagship smartphone receiver and is designed to let you use features of your smartphone in a safe, direct and convenient way that you have never seen before.
Just place your smartphone in the integrated cradle, and it will transform into an extension of your head unit. Using direct access keys, you can use your favorite apps without touching your smartphone, helping to ensure a smooth and safe ride wherever you go. Add to this, when connected with the new Pioneer Smart Sync app, various colour and sound adjustments offer a superior customised in car experience. Utilising the Pioneer Smart Sync app, you can connect to a wide variety of commonly used applications, including various music and mapping apps such as Spotify and Google Maps. It lets you easily access all the compatible apps you use on a daily basis without distracting you from the road. Expect only the best audio environment when you’re driving in your car, you’ll get it with SPH-C10BT & Pioneer Smart Sync. Packed with advanced technologies that Pioneer has developed over the years, we can now offer you a greater variety of sound effects and audio adjustments, to upgrade the sound experience in your car.
General:
- FLAC Playback
- MP3 / WMA/WAV Playback
- Bluetooth
- Built-in Amplifier: MOSFET 50Wx4
- D/A Converter24-bit
- Time AlignmentManual
- Equalizer13-Band GEQ 31-Band GEQ (with PSS App)
- Crossover NetworkHPF / LPF
- Advanced Sound Retreiver
- Advanced Sound Retreiver for BT Audio
- Subwoofer control
- Dynamic Bass Enhancer
- Display with LED Back light: 8-Digit VA LCD ( 1-Line )
- Color Customization: 3-Zone Color Illumination
- Android/iPhone Control
- SD Card Slot
- USB Interface
- USB Quick Charge for Android
- Pioneer Smart Sync
- 31-Band EQ
- Parking Assistance
- Voice Recognition
- Integrated Smartphone Cradle
UPC Code 884938405799
JVC's CS-DR6940 6"x9" 4-way speakers are the affordable solution. Built to weather the extreme temperatures of life in your car doors, these speakers offer strong audio performance with good power handling.
JVC uses a lightweight yet durable carbon mica woofer cone and a PEI midrange driver for smooth, consistent performance, and a balanced dome PEI tweeter and supertweeter that'll increase your music's clarity. These speakers will give you a solid boost in sound quality, even when powered by your factory radio.
General Features:
- 4-way car speakers.
- Power range: 2-90 watts RMS/ Peak: 550 watts Per Speaker.
- 6"x9" carbon mica woofer.
- cloth and rubber hybrid surround.
- 2-5/8" PEI midrange driver.
- 1" balanced dome PEI tweeter and 19/32" supertweeter.
- Frequency response: 56-21,000 Hz.
- Sensitivity: 86 dB.
- Mounting depth: 3-1/8".
- Ferrite Magnet.
- Hybrid Surround.
- Impendance: 4-Ohms.
UPC Code 046838073410
The JBL Club A754 amplifier features a low-profile chassis and a small overall footprint to fit in
more vehicles where available space is limited. Speaker-level and low-level inputs allow the Club A754 to integrate with both aftermarket and factory car stereo systems. Unlike many amplifiers available at similar prices, the JBL Club A754 features variable electronic crossovers for precise system tuning and performance.
The Club A754 has been engineered using Balanced Differential Inputs to ensure low noise
and distortion even at high output levels. This also makes it far less susceptible to line induced
engine noise. When low-level inputs are used, this control adjusts the input sensitivity between 200mVrms
and 2.0 Vrms. When high-level inputs are used, this control adjusts the input sensitivity between 2Vrms and 20Vrms.
On-board circuitry protects the Club A754 from shorts, high-temperature, overvoltage and
undervoltage. An LED indicator is provided to let you know when one of these conditions exists. Using multiple amplifiers, the Club A754 has full range preamp outputs allowing you to feed an
additional amplifier without using splitters.
The JBL Club A754 4 channels subwoofer amplifier delivers 400-Watts RMS using a Class H
amplifier design to ensure high output and minimum current draw. This switch changes DC to REM to adapt with low-level signals or high-level signals, this is especially helpful as part of remote turn-on lead of your installation more choice. A selectable “Turn-on mode” can protect battery to avoid current drain, when you don’t expect to turn on your amplifier.
General Features:
- 4 channel car amplifier
- 75 watts RMS x 4 at 4 ohms (100 watts RMS x 4 at 2 ohms)
- 200 watts RMS x 2 at 4 ohms in bridged mode (4-ohm stable in bridged mode)
- Variable high- and low-pass filters (32–320Hz, 12dB/octave) on front and rear channels
- Preamp and speaker-level inputs
- Preamp outputs
- Fuse rating: 30A x 2
- 8-gauge power and ground leads
- recommended – wiring and hardware not included with amplifier
- Compact size
- High and low level input
- Variable crossover
- Low noise and distortion
- Input Level Control
- Full on-board protection
- Preamp Outputs
- Class H amp technology
- Turn-on mode
- W x H x D = 320mm x 51.3mm x 180mm
- W x H x D = 12-5/8" x 2-1/16" x 7-1/8"
UPC Code 050036369190
Renegade REN10KIT 10mm^2 Car Audio Complete Amplifier Installation Wiring Kit
General Features:
- 1 x 10 mm^2 Power Wire (red), flexible Strands (0,15 mm), 5 m
- 1 x 10 mm^2 Ground Wire (grey), flexible Strands (0,15 mm), 0.8 m
- 1 x RCA Stereo Audio Cable (blue), double shielded, 5 m
- 1 x 0.5 mm^2 Remote Wire, 5 m
- 1 x AGU Fuse Holder with 40 A ANL Fuse
- Installation Kit
Installation Instructions:
- Disconnect at first the negative ground connection from the vehicle’s battery.
- Connect the GROUND CABLE (brown, 0.8m) with the ground terminal of the amplifier and a suitable GROUND contact point on the car chassis, with a maximum distance of 1 meter from the amplifier. Use the ringterminal for the GROUND contact point. Ensure that all paint or other insulation is removed from around the hole area.
- Find a suitable position for the FUSE HOLDER next to the car battery’s PLUS POLE. The maximum distance should not be more than 30 cm. Please ensure, that you don’t damage any parts of the car, like the fuel tank, wires etc.
- Cut off a part of the POWER CABLE (red, 5m) on one end, which has the same length like the distance from the battery’s PLUS POLE to the FUSE HOLDER (max. 30cm). Connect this part on the end without ringterminal with the FUSE HOLDER (without inserted fuse) and the other end to the battery’s PLUS POLE. Use for the connection the supplied ring terminals.
- Lead one end of the POWER CABLE (red) from the car battery area through the car to the +12V terminal of the amplifier and connect it. Then connect the other end of the cable with the FUSE HOLDER at the suitable terminal.
- Lead the RCA/CINCH CABLE pair with attached REMOTE WIRE from the HEAD UNIT through the car to the amplifier’s position. Then connect the RCA/CINCH plugs on one end with amplifier, and the other end with the HEAD UNIT RCA/CINCH outputs. Please observe the correct polarity of all connections.
- Connect the one end of the attached REMOTE WIRE with the REMOTE/REM terminal of the HEAD UNIT and the other end with the REMOTE/REM terminal of the amplifier. This wire provides a turn on/turn off signal to the amplifier, when the HEAD UNIT is turned on / turned off. NOTE: some amplifier types may require, that you have to extend the REMOTE WIRE with a suitable cable, to lead the REMOTE WIRE to the other endpanel of the amplifier.
- At least insert the FUSE into the FUSE HOLDER. Ensure not to cause a short circuit, or your car’s electric system may get damaged. Do not touch the bare metal parts of the cable or the car battery, otherwise a risk of electric shock consists. Then re-connect the negative ground connection to the vehicle’s battery.
UPC Code 854932002478